AUDIBAX B07MK7K2DD Free Hand Head UHF User Manual
- May 15, 2024
- AUDIBAX
Table of Contents
AUDIBAX B07MK7K2DD Free Hand Head UHF
Product Information
Specifications
- Product Name: Free Hand-Head UHF
- Type: Professional UHF Wireless Microphone System
- Features: Handheld operation, receiver with indicator lights
Product Usage Instructions
- Hand-held Operation Instructions
- Ensure the receiver is powered off before use.
- When powered on, the indicator light will be bright green to indicate the status.
- If the indicator light turns red, it signifies a low battery level in the receiver, prompting you to replace the battery.
Receiver Operation Description
To pair frequencies, follow the provided instructions. If the microphone audio is not clear, re-match the frequency operation. If the product is not used for an extended period, remove the battery to prevent leakage and damage to internal components.
FAQ
- Q: What should I do if the microphone audio is unclear?
- A: Re-match the frequency operation to ensure clear audio output.
- Q: How can I check the battery level of the receiver?
- A: The indicator light will turn red to indicate a low battery level in the receiver.
Product Features
This product is designed with the most advanced Wireless digital transmission technology. The signal transmission is greatly improved by the digitalization of RF signal and the digital transmission of audio signal. The stability and confidentiality of the loss, reducing the loss of transmission, and the quality of sound quality can be connected it is completely determined by the mi core to meet the demands of customers by changing the mi core. The RF signal contains 48 frequencies and 48 random IDs, and the microphone is the most anti-interference b Strong, undisturbed by any signals from the outside. Reach the first-class KTV room acceptance Level. This product applies to a wide range of families, teaching, meeting rooms, outdoor activities, k room, etc., with a single set of cartridges, with a 6.35 plug or 3.5 insert ole the sound equipment is compatible.
Hand-help, lumbar operation instructions
Open/close handheld microphone: when the microphone is turned off, the power button is pressed to turn on. The power button is turned off when it is switched on. Switching frequency: at the boot time, (the frequency switch) is shortened by the frequency of switching, each short press I’m going to switch to a frequency point. Enter pairing: when the phone is shut off, hold the power button) don’t let go. When the LED lights start flashing, release your hand, hand in the LED lights always flicker in pairs. Exit pairing: shutdown exit: operate “shutdown” (long press power button), Shutdown, exit pairing. Switch operation exit: operate on “switching frequency” (short press frequency switch). The microphone is switched to a normal launch state, and the RF indicator of the receiver is lit. Low-pressure indicator: the battery capacity Will son run out when the battery symbol of the microphone is flashing. Suggest changing the battery.
Description of receiver operation
- According to the power off. Indicator light working condition: the indicator light is bright green when switched on Status.
- The indicator light is bright green low pressure working state of the receiver battery, suggest replacing the battery.
- The microphone is switched from bright green to red (receiver working condition).
Paired pair of frequency operation instructions
When the phone is shut off, hold the power button (power button + change key) at the same time to release, when the LED lights begin to blink, release your hand and go into the match in the state, the LED lights are flashing. The receiver is switched on and off when it is turned off the receiver should be switched on and off when the receiver is switched on after the machine, the light of the green power lamp changed to a red light for three times green, short press the microphone to make sure the receiver lamp turns red the opposite is true. At this point, the handheld microphone is randomly selected in the set of 48 frequency points four frequency and four random ID codes, and microphone interference is the strongest, no noise generated by any signal interference from the outside world.
Note: when Mimi is not audible, please re-match the frequency operation. The machine Will not be used for a long time. Please take out the battery leakage, damage internal electronic componets.