AUDIBAX Roma 80 Go 80W Portable PA Speaker User Manual
- May 15, 2024
- AUDIBAX
Table of Contents
AUDIBAX Roma 80 Go 80W Portable PA Speaker
OPERATION
Functions
- MP3 Player
- Volume: The first channel volume control
- Echo: The first channel Echo volume control
- The first channel Line/Mic Input choose
- Input: The first channel Combo Line/Mic input
- Volume: The second channel volume control
- Echo: The second Echo volume control
- For the second channel Line/Mic Input choose
- Input: The second channel Combo Line/Mic input
- Treble: Treble volume control
- MP3 AUX VOL: MP3 and AUX input volume control
- USB: USB input
- AUX input: IPOD /MP3 input
- Bass: Bass volume control
- Master Volume: all channel volume control
- Mix out
- Battery charge level indicators
- Power switch: It allows to switch on / off the unit
- Main supply inlet: Connect an IEC main power cable to supply the unit
SYSTEM CONFIGURATIONS
The versatile Roma 80 Go system operates in different unique modes. Use the examples below to quickly identify the best mode for your applications.
Tilt-back (On the floor)
For a performance where your audience is close to you, tilt the Roma 80 Go
onto its back edge. For best results, the performer should stand or sit on one
side of the cabinet to avoid blocking sound from the audience.
Monitor (On the floor)
To use the Roma 80 Go as a professional floor monitor, place it on the ground
horizontally, in front of and pointing toward the performer. Tilt the cabinet
onto its side edge. Stand (On speaker stand, table etc.) Put the Roma 80 Go on
a speaker stand, table or other
elevated surface for general-purpose sound reinforcement.
Tilt-back (On the floor)
For a performance where your audience is close to you, tilt the Roma 80 Go
onto its back edge. For best results, the performer should stand or sit on one
side of the cabinet to avoid blocking sound from the audience.
Monitor (On the floor)
To use the Roma 80 Go as a professional floor monitor, place it on the ground
horizontally, in front of and pointing toward the performer. Tilt the cabinet
onto its side edge. Stand (On speaker stand, table etc.) Put the Roma 80 Go on
a speaker stand, table or other elevated surface for general-purpose sound
reinforcement.
BATTERY RECHARGE
The speaker has an internal, rechargeable battery capable of up to 6 hours of continuous audio on a full charge. Even though the speaker may have some charge when first taken out of the box, we recommend fully charging your speaker before using the system. To charge the battery:
- Connect the speaker to a power outlet using the included power adapter.
- Keep it plugged in until the indicator changes to 100%, that’s well-charged. The speaker utilizes a sealed lithium battery.
- When not in use, the battery will slowly self-discharge. If you do not use the speaker for a long time, it should be in full charge before storing.
- Better to charge the unit every six months if no use.
- It will be good and longer to use. If the battery is at a low charge, impossible to recharge the battery, but the charge time is 6 hours more.
BLUETOOTH INSTRUCTIONS
Single speaker Bluetooth Pairing
- Turn on the power of the speaker, and make sure the channel 3 ‘AUX/MP3’ button is selected to MP3 mode. Press the ‘MODE’ (Interchange) button on the MP3 to Bluetooth. Screen message (‘bt’) It will be discoverable as ‘Roma 80 Go’.
- In the setting of your Bluetooth-enabled devices, set it to ‘discover’ available devices. From the Bluetooth device list, select the ‘Roma 80 Go’ device.
- The speaker is now paired with your Bluetooth-enabled device.
Two speakers Bluetooth Pairing (TWS linking)
The system supports ‘True Wireless Stereo’ linking which allows you to connect
the other speaker by Bluetooth.
- Turn on the power of the first speaker (Master speaker), and make sure the channel 3 ‘AUX/MP3’ button is selected to MP3 mode.
- Press the ‘MODE’ button to interchange Bluetooth function (screen ‘but’)
- Turn on the power of the second speaker (Slave speaker), and make sure the channel 3 ‘AUX/MP3’ button is selected to MP3 mode.
- Press the ‘MODE’ button (slave speaker) to interchange Bluetooth function (screen message ‘but’)
- Press ‘BT PAIR’ (master speaker) then both of the screen messages on the master and slave speaker will change to ‘bt: bt’ and you will hear a prompt tone, the two speakers will pair automatically.
- Connect your Bluetooth audio device to the master speaker and enjoy the ‘TRUE WIRELESS STEREO’ sound.
Note
The two speakers are identical to each other, either one can be used as a
master or slave speaker.
Technical Information
Mechanical
- LF Size: 6.5” Carton Dimension: 35.1 x 31 x 42.2 cm
- HF Size: 3*3” Gross Weight: 8.5kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>