HOOKE ROAD BXG.3045 Unlimited Running Board Side Step Bar Installation Guide

HOOKE ROAD BXG.3045 Unlimited Running Board Side Step Bar

Product Information

Specifications:

• Model : BXG.3045
• Hex Head Flange Bolts : 6 pcs, Size M8*25
• Carriage Bolts : 12 pcs, Size M6*20
• Hex Bolt : 10 pcs, Size M10*25
• Split Lock Washer : 10 pcs, Size D10
• Flat Washer : 10 pcs, Size M10251
• Flanged Hex Nylon Lock Nut : 12 pcs, Size M6

Tools Required

10mm, 13mm, and 17mm Wrench

Installation Time:

About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.

Installation Instruction

Driver Side Installation:

• Step 1 : Before starting the installation, identify the front, middle, and rear brackets based on markings. Front bracket – circular marking, middle bracket – no marking, rear brackets – other shaped markings.
• Step 2 : Install brackets into side steps using hex bolt (M1025), split lock washer (D10), and flat washer (M1025*1). The middle bracket requires one bolt.
• Step 3 : Install side steps into the vehicle. Use hex head flange bolts (M1025) for the middle hole and carriage bolts (M620) for both sides. Secure with a flanged hex nylon lock nut using a 10mm wrench.
• Step 4 : Complete the installation. Enjoy your off-road adventures with this Hooke Road product!

Attention:

The product parts may slightly differ from the actual contents but should not affect installation.

Contact your distributor for any questions about your purchase.

FAQs

• Q: What should I do if a part is missing?
  • A : Please contact your distributor for assistance in obtaining the missing part.
• Q: Can I install the side steps alone?
  • A : While it’s recommended to have 1-2 people for installation, it is possible to install the side steps along with the necessary tools.
• Q: Can these side steps fit on any vehicle?
  • A : These side steps are designed to fit specific vehicle models. Please verify compatibility with your vehicle before installation.

Contents

Tools required

a. 10mm & 13mm &17mm Wrench;

Installation

• Installation time
  • About 1 hour, 1-2 people may be needed. Installation time may differ according to your mechanical skill level.
    (PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)

To view the electronic version (BXG.3045), please scan the QR code.

Installation instruction

• Driver-side installation:
  • Step 1: Before starting the installation, please first identify the front, middle, and rear brackets by the markings in the middle position of the brackets. As the picture below. The brackets with a circular marking is the front brackets, the ones without any marking is the middle brackets, and the brackets with other shaped markings are the rear brackets. Once you have distinguished the brackets, you can proceed with assembling our brackets.

• *  **Step 2** : To install the brackets into the side steps. Use the hex bolt (M10*25), split lock washer (D10), and Flat Washer (M10*25*1). The middle bracket only needs to use one bolt.

• *  **Step 3** : To install the side steps into your vehicle. The middle hole use the hex head flange bolts (M10*25). Both sides use the carriage bolts (M6*20), flanged hex nylon lock nut need use the 10mm wrench to screw it.

• *  **Step 4:** The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

1. The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
2. Please feel free to contact your distributor if you have any kind of questions about your purchase.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>