EMEET E4307 Meeting Capsule Pro Room Kit User Manual

EMEET Meeting Capsule Pro Room Kit

User Manual

Package

EMEET Meeting Capsule Pro

Component Introduction

Device Indicator Light

Button Introduction

EMEET StreamCam One

Component Introduction

Status Indicator Light

Battery Level Indicator Light

lovel

Button Introduction

• Powerbutton – press and hold Power onfoff

• Powerbutton – short press
  When wirelessly Daisy Chained, short press totum onfoffimagetransmission

• Resetbutton – press and hold Reset the device

Quick Start Guide

Assemble the Power Adapter
Alignthe plug slot with the pins on the power adapter;
Hold and rotate the plug clockwise tolockit.

Toremove the plug, hold the button and rotate counterclockwise tounlockit.

Note: Different areas are paired with different plugs.

Assemble the Tripod
The matching 1/4″ threaded tripod and swivel adapter should be used with the EMEET StreamCam One.

Screwthe 1/4″ threaded tripod + swivel adapter tothe 1/4″ threaded hole on the bottom of the EMEET StreamCam One.

(Note: The matching 1/4″ threaded tripod is not recommended for use with the EMEET Meeting Capsule Pro as it does not provide enough supportfor its weight )

Connection

Fast Connection

1. Connect the EMEET Meeting Capsule Pro to the power adapter, and it will automatically turn on after being plugged in;
2. Connect the computer and the EMEET Meeting Capsule Pro via USB cable (USB OUT);
3. This product is driver-free. For first-time use, please Select the EMEET Meeting Capsule Pro as mic, camera and speaker.
   *macOS: System Preferences > Sound > Sound effects/Output/Input

• Windows: Right-click on the sound icon > Open Sound Settings > Select Output device/Select Input device
• Conference software (Zoom, Skype, Teams, etc.): Settings > Audio > Speakers/Microphone; Video > Camera 4. Press and hold the EMEET StreamCam One power button for 2 seconds to turn on the device, and the device will automatically wirelessly connect to the EMEET Meeting Capsule Pro.

Pairing
The EMEET Meeting Capsule Pro Room Kit is already paired by default and can be used directly.

Ifyou have a specific need, you can perform a new pairing for your device. Please follow these steps:
For more detailed instructions, please visit the following URL:
https://emeet.com/pages/meeting-capsule-pro-room-kit-faq

EMEETLINK

Software Download: You can download EMEETLINK by visiting www.emeet.com/emeetlink. (Available for Windows and mac0S)

Formore detailed instructions, please visit the following URL:
https://emeet.com/pages/meeting-capsule-pro-room-kit-faq

EMEET Two(2) Years Limited Warranty

Limited Two(2)Years Warranty with EMEET proof of purchase. The warranty does not cover normal wear and tear or damage caused by accidents or misuse.
To protect your rights, please keep the proof of purchase. For service, please contact us:

+ 1888 959 5320 (EST 9:00am-5:00pm)
support@emeet.com
Www.emeet.com

Safety Guide

Caution:
To avoid electrical shock, do not open the housing of this product. In addition, users do not need to use the product’s internal parts. To repair the product, please contact qualified maintenance personnel or mail the product to our after-sales department.

1. Please read this guide carefully.
2. Please keep this guide.
3. Please observe all warnings.
4. Please follow all instructions.
5. When cleaning this product, use a dry cloth only.
6. Choking hazard – This product contains small parts. It is not suitable for children under the age of 3.
7. Do not put this product near a heat source, such as a heating radiator, hot air regulator, stove, or loudspeakers (including amplifiers) that produce heat.
8. Do not use this product if you must remain alert of your surroundings, for example, while driving a car or riding a bike.
9. Do not submerge this product in water or expose it toa damp environment for a long period of time. Do not use this product when engaging in water sports, such as swimming or surfing.
10. Please protect the power cable and audio cable. Do not step on or apply pressure on them. Do not pull on the product’s plug, socket, or cable outlet.
11. It is recommended that users use the accessories that have been specified by the vendor.
12. Do not expose the battery to environments with excessive heat, such as direct sunlight or sources of fire.
13. Connect a power supply within the specified voltage range.
14. If a power cable that is connected to the product is not currently being used to charge the product, please disconnect the power cable from the port and shut off the power supply.
15. To repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, if the power cable or plug is damaged, liquid has flowed into the product, an object has fallen into the product the product has come into contact with rain or moisture, the product cannot operate properly, or if the product has fallen.

Regulatory Compliance Information

EU/UKCA Compliance:
Hereby, SHENZHEN EMEET TECHNOLOGY CO., LTD. Corporation declares that the radio equipment is in compliance with <Directive 2014/53/EU / RER 2017 (SI 2017/1206)>. A copy of the EU/UK Declaration of Conformity is available at http://www.emeet.ai/Certifi-cate.html

1. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction.
2. If you use a third-party charger, therecommended output voltage/current of the adaptor is 5Vdc/1A.,and the adapter shall be CE/UKCA approval type.
3. It is recommended to charge the product in an environment with a temperature that ranges from 5 C~25C.
4. Caution risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to the instructions.
5. Frequency: 2.4GHz (Bluetooth®)
6. Maximum Power:: <100mW
7. The suitable temperature for the product and accessories is O~40 C.
8. Due to the used enclosure material, the product shall only be connected to a USB Interface of version 2.0 or higher.
9. Excessive sound pressure from earphones and headphones can cause hearing loss.

ISED Canada compliance:

1. This Class B digital apparatus complies with Canadian ICES-003.

2. This device complies with Industry Canada license-exempt RSS standard(s).

3. Operation is subject to the following two conditions:
   (1) this device may not cause inte rference, and
   (2) this device must accept any interference, including interference that may cause undesired operation of the device.

4. This equipment is portable device. The output power of this device is less than 20mW.The SAR test is not required.

IMDA Compliance:
Complies with IMDA Standards DA107974

FCC Compliance:
This device has been evaluated to meet general RF exposure requirements.

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and operated with a minimum distance of 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested  and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, the user is encouraged to  try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

E4305
wwwemeet.com
Email: support@emeet.com
Address: Unit 2C, Building A6, Guangming Science Park, Guanguang
Road 3009, GuangmingDistrct, Shenzhen, China

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>