ANKER A2720 Car Charger USB C User Manual
- June 14, 2024
- Anker
Table of Contents
ANKER A2720 Car Charger USB C
Specifications
Input: 12 / 24 V
Output:
- USB C Output: 5V 3A / 9V 2.22A
- USB A Output: 5V 2.4A Max
Product Information
- The PowerDrive PD 2 is a car charger that allows you to charge your devices on the go.
- It has two USB ports, one USB C and one USB A, providing fast charging for multiple devices simultaneously.
- The charger is compatible with most smartphones, tablets, and other USB-powered devices.
Important Safety Instructions
Warning:
- Before using this car charger, read all the instructions and cautionary markings on this car charger.
- Do not expose this car charger to rain, moisture, or snow.
- Use of an attachment not recommended or sold by this car charger manufacturer may result in fire, electric shock, or injury to persons.
- Save these instructions: Keep these safety instructions for future reference.
FCC Statement
- This product complies with FCC regulations. Any unauthorized modifications or changes to the device may void the user’s authority to operate the equipment.
Declaration of Conformity
- Anker Innovations Limited declares that the product type A2720 is in compliance with Directive 2014/30/EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com
GB Declaration of Conformity
- Anker Innovations Limited declares that the product type A2720 is in compliance with the Electromagnetic Compatibility Regulations 2016 and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Product Usage
Step 1: Connect the Car Charger
- Plug the car charger into your vehicle’s cigarette lighter socket. Ensure that the car charger is firmly inserted.
Step 2: Connect Your Devices
- Connect your devices to the car charger using suitable USB cables. For devices that support fast charging, use the USB C port for optimal charging speed.
Step 3: Charging Indicator
- The car charger features an LED indicator to indicate the charging status. When a device is connected and charging, the LED will light up. If the LED does not light up, ensure that the car charger is properly connected and that your device is compatible with the charger.
Step 4: Charging Multiple Devices
- The PowerDrive PD 2 allows you to charge multiple devices simultaneously. You can connect one device to the USB C port and another device to the USB A port. The charger will automatically distribute the appropriate power to each device.
Step 5: Disconnecting
- When you’re done charging your devices, simply disconnect them from the car charger. To remove the car charger from the cigarette lighter socket, firmly grasp the charger and pull it out.
FAQ
Q: Can I use the PowerDrive PD 2 with any vehicle?
- A: Yes, as long as your vehicle has a standard cigarette lighter socket, you can use the PowerDrive PD 2 car charger.
Q: Can I charge non-USB devices with the PowerDrive PD 2?
- A: No, the PowerDrive PD 2 is designed specifically for USB-powered devices. It is not compatible with non-USB devices.
Q: Can I use the USB C port for charging non-fast charge compatible devices?
- A: Yes, the USB C port can be used to charge non-fast-charge compatible devices. The charger will automatically adjust the power output to suit the connected device.
Q: Can I charge two fast-charge compatible devices simultaneously?
- A: Yes, you can charge two fast-charge compatible devices simultaneously. However, please note that the charging speed may be slightly reduced when charging two devices at the same time.
Q: Is the car charger covered by warranty?
- A: Yes, the PowerDrive PD 2 car charger is covered by a limited warranty. Please refer to the warranty information provided with the product for more details.
Using the Car Charger
- For the fastest and safest charge, use an Anker® cable, your device’s original cable, or another certified cable (such as MFi).
IMPORTANT SAFETY INSTRUCTIONS
Warning
- SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for car charger Model A2720.
- Before using this car charger, read all the instructions and cautionary markings on this car charger.
- Do not expose this car charger to rain, moisture, or snow.
- Use of an attachment not recommended or sold by this car charger manufacturer may result in a risk of fire, electric shock, or injury to persons.
- Do not operate the charger with a damaged cord or cigarette lighter connector; replace it immediately.
- Do not operate this charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified service person.
- Do not disassemble this charger; take it to a qualified serviceperson when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
- To reduce the risk of electric shock, unplug this charger before attempting any maintenance or cleaning. Turning off controls will not reduce this risk.
- To reduce the risk of fire or electric shock, do not interconnect output terminations.
- The maximum ambient temperature during use of this charger must not exceed 25°C.
- CAUTION – For continued protection against the risk of fire, replace only with the same type and ratings of fuse, fuse rating 32VDC, 7A.
- Do not hang any type of accessory or accessory bracket from the plug.
SAVE THESE INSTRUCTIONS
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of protection against
hermits are dense in a resident reasonable installation.
Frequency energy end teno stalled and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. for Consult the dealer or an experienced radio / TV technician
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
The following importer is the responsible party. Company Name: Fantasia
Trading LLC
This device complies with Industry Canada license-ICES-003.
Operation is subject to the following two conditions:
- This device may not cause interference,
- This device must accept any interference, including interference that may cause undesired operation of the device.
IC Statement:
This digital apparatus complies with CAN ICES-3(B)/NMB-3(B).
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2720 is in compliance with Directive 2014/30 /EU & 2011/65/EU. The full text of the EU Declaration of Conformity is available at the following internet address: https://www.anker.com
Declaration of Conformity
- Hereby, Anker Innovations Limited declares that the product type A2720 is in compliance with the following Directives:
- Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
- The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Specifications
- Input 12 / 24 V = 4 A
- USB C Output 5V – 3A / 9V =-2.22A
- Output USB A Output
- 5V =- 2.4A Max
- Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Customer Service
- 18-month limited warranty
- Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty
- Lifetime technical support
- support@anker.com
- support.mea@anker.com (For Middle East and Africa Only)
- (UK) +44 (0) 1604 936200
- For FAQs and more information, please visit: anker.com/support
Documents / Resources
|
ANKER A2720 Car Charger USB
C
[pdf] User Manual
A2720 Car Charger USB C, A2720, Car Charger USB C, Charger USB C
---|---