EMEET OfficeCore M2 Max Professional Speakerphone User Manual

EMEET OfficeCore M2 Max Professional Speakerphone

Buttons

Overview

1. VoicelA button
2. Bluetooth button
3. Answer /End Phone Call button
4. Volume+ button
5. Volume- button
6. Mute button
7. Power button
8. Status LED
9. Source LED
10. Rubber plug
11. LOCK port
12. Headset output port
13. LINK Daisy Chain port
14. USB port (Type Cl
15. Dongle
16. Nameplate
17. MIC hole

Power On/Off

Check battery level

Low battery warning

voice Button

Short press Al Noise Reduction button, to enable/disable Al noise function, Turning on Voice A noise reduction can greatly reduce some noises m the meeting scene, such as from keyboard tapping, air conditioning noise, and general unwanted background noise.

Note: After the noise reduction mode is enabled, in order to maintain good sound pickup effect, please make a call within a sound pick up range of 1.5 ml4.9ft).

MIC Mute Button

Answer/End Phone Call Button

Volume+ /Volume  Button

Bluetooth Connection

Notes:

• When turning on the device, it will reconnect to the last computer/mobile phone via Bluetooth whilst it is active.
• Bluetooth closed means it can not be found.

USB Connection

USB Dongle Connection

Headset Connection

Note: When the headset is connected, the speaker is automatically muted.

Daisy Chain Cable

Daisy-Chain can be carried out by connecting the LINK ports of two productl: using an eMeet Daisy Chain cable.

Note: Meet Daisy Chain cables- must be purchased separately,

Lock Port Setting

Note: The LOCK port is of a Kensington type which requires the- user to buy a lock otherwise.

USB Dongle Connection

Lock Port Setting

Note: The LOCK port is of a Kensington type which requires the- user to buy a lock otherwise.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>