KEDIERS G300 PC Case 6 Pre Installed PWM Fans Installation Guide
- May 15, 2024
- KEDIERS
Table of Contents
Computer Case
COMPUTER GAMING CASE
Installation Guide 5.0
Case Features
Screw Kit
Used for
A. Motherboard Standoff
B. PSU/PCI
C. SSD / Motherboard
D. HDD
E. Cable Manageme
Verwendet fur:
A. Befestigung des Motherboards
B. Netzteil/PCI
C. SSD/Motherboard
D.HDD
E. Kabel-Management
Case Specifications
Maximum CPU cooler height| 160mm
350 mm
220mm
---|---
Fan Compatibility|
Side| 3xl20mm/3xl40mm
Top| 3xl20mm/2xl40mm
Rear| lxl20mm
Radiator Compatibility
Lilfter
| Seite | 3xl20mm/3xl40mm |
|---|---|
| Oben | 3xl20mm/2xl40mm |
| Hinten | lxl20mm |
Disassembly Steps
Please protect the edges and corners of
the tempered glass! Don’t hit the corners, otherwise the glass is likely to
shatter
Motherboard installation
NOTE: For ease of transport and to
prevent the product from being damaged,we pre-installed the fans on the
chassis. if your 1/0 shroud of the motherboard is too high, you can remove the
rear fan (as shown in O) first before installing,which will be more convenient
for you.
Motherboard Compatibility:
EATX (12″‘ 10.9″) / ATX / Micro ATX
1/0 panel connection
- Power Button
- Reset
- USB2.0
- Headphone
- MIC
- USB3.0
Water Cooling Radiators & Fans installation
Installing SSD/HDD
Supporting to install
2XHDD+3SSD/1 XHDD+4XSSD
Please note the screw holes
Fan Connection
Installing PCI Card(s)/PCI-E/GPU
Power Supply lnstallation
PSU is not included n the package.
Computer Gaming Case