MASiNGO Festoso X9 Karaoke Machine for Adults and Kids User Manual

MASiNGO Festoso X9 Karaoke Machine for Adults and Kids

What’s included

• 1x MASINGO Karaoke Machine
• 2x UHF Wireless Microphones
• 1x 3.5 mm AUX Cable
• 1x 3.5 mm AUX-RCA Cable
• 1x 18V Power Adapter
• 2x Microphone Holsters
• 1x Device Holder
• 1x Remote Controller
• 1x Performer’s Manual

Parts & features

Review before using

1. Keep this manual for future reference.
2. Adhere to all warnings.
3. Keep ventilation openings clear; do not block any of this machine’s vents/ openings.
4. Install and set up the machine according to the manufacturer’s instructions provided in this manual.
5. Do not install near any heat sources (i.e. radiators, heat registers, stoves, amplifiers, or any other objects that produce heat).
6. Protect the machine’s power adapter. Prevent the power adapter from being walked on or pinched – particularly at the plug, wall outlet, and the connection to the machine.
7. Unplug the machine during lightning storms or when unused for long periods.
8. Refer all technical services to qualified personnel. Servicing is required when the machine has been damaged in any way, such as damage to the power adapter cord or plug, contact with liquid, exposure to moisture or rain, if the machine has been dropped, or anything else that may cause the machine to fail to operate normally.
9. Do not force a USB drive into its slot. It can only be inserted in one direction. If the drive does not insert easily, remove it, flip it over, and try again.
10. To maintain peak performance and battery longevity, fully charge the karaoke machine at least once every month before storing it away for a long time.
11. Check the machine for damage before each use.
12. Do not expose this product to water, moisture, heat, or steam. Do not place objects filled with liquid on this product.
13. When using the product outdoors, do not use it in wet or very hot weather. Do not place the machine in direct sunlight. Do not run a charging cable through puddles or other moisture.
14. Clean and store the device after each use.
15. Do not use the product with attachments not approved by the manufacturer.
16. Do not expose batteries to excessive heat such as sunshine, fire, or other heat sources to reduce the risk of fire or explosion.

Quick Start Guide

1. Charge the machine.
2. Set up a wireless microphone.
3. Power on the machine.
4. Activate one of the music modes: Bluetooth, AUX, USB, or PA.
5. Sing your heart out!

Note:
See the “Detailed Usage Guide” section of this manual for more information on how to operate your machine.

Detailed Usage Guide

Machine

How to turn the machine on/ off
Press and hold the Power (4) button to turn the machine on and off. As it powers on, the LED screen will read “HI” and the machine will say “Power On.” Press the button again to turn the machine off.

How to charge the machine
Plug in the machine’s Power Adapter (25) into the Charging Port (2) machine charging port on the function board. Then connect the power adapter into a polarized wall outlet. Be sure to charge fully (charging time: 6-8 hours) before each use.

How to adjust the Machine Volume
Turn the Master Volume (71) knob to adjust the volume up and down on the machine. If your smart device is connected via Bluetooth, you may also use the smart device’s controls to adjust the machine volume.

How to operate the LEDs
While the machine is on, press the LED (10) button to turn on the LEDs. Press it again to turn them off. While the LEDs are on, you’ll see the front panel light up with a fire-like effect. The disco ball on the top of the machine will also light up in sync with the rhythm of the music. If you tap the top of the machine near the disco ball, it will sync with your tapping.

Note: There is only one LED mode. It cannot be adjusted.

How to use Karaoke Mode
Karaoke Mode is a unique function that allows you to add your voice over the audio tracks playing through the speaker. There are two versions of this mode: Mode 1: “Classic Karaoke Mode” removes all vocals from the track; Mode 2: “Auto Vocal Removal” reduces the vocal only when someone is singing into the mic. Click the Karaoke Mode (12) button once for Classic, twice for Auto, and click again to turn it off.

How to use Voice Effects
This machine features five different voice effect modes: monster, Male, Female, Baby, and Magic. Hold down the Karaoke Mode (72) button to activate the first mode in the sequence, then hold it down again to switch to the last mode. After you’ve reached the last mode in the sequence, the next mode will be OFF. Hold the button down again to return to the first effect, Monster.

How to use the EQ
The EQ consists of three separate control knobs on the control panel: Echo/Reverb (75). Treble (76). and Bass (78). Turn each knob to the right to adjust that effect. Return all effects to normal by turning all knobs to the left.

How to use the Repeat button
Click the Repeat (14) button once to enable “repeat once”-the setting that repeats the current song. Double-click the Repeat button to enable “repeat all”-the setting that repeats all songs in the playlist.

How to use the Monitor function
The monitor function enables you to listen to the mix with head­phones. Plug any 3.5 mm jack of a headphone cable into the Monitor (7) input. Ensure the Master Volume (11) and the head­phone volume are both set to mid-level.

How to connect the machine to your television
The Festoso X9 has the ability to play your TV’s audio through its speakers. Connect the included AUX-RCA Cable (24) to the 3.5 mm AUX Port (8). Connect the other end to your TV’s RCA port.

How to attach the Device Holder
The Festoso X9 comes with a Device Holder that’s adjustable to accommodate a variety of device sizes. Press the spring-loaded arms in on each side and place the holder between the extendable handle. Release the arms to press on the inside of the handle to secure it. Place your smart device in the holder and adjust to the correct size.

Microphones

How to turn the microphones on/ off
For both wireless microphones, hold down the Mic Power Button (23) up to turn the microphone on. The LED screen will display a frequency, battery level, and a connection icon. Hold it down again to turn the microphones off.

How to adjust the microphone volume
Turn the Mic Volume (1) knob to the right to increase the micro­phone volume.

How to connect a third-party wired microphone
Gently but firmly plug the 6.5 mm AUX jack at the end of any third-party wired microphone into the 6.5mm Mic Input (6) on the machine’s function board. Adjust the volume using the Mic Volume (1) knob.

How to install or replace the UHF microphone’s batteries
Unscrew the cap on the bottom of the microphone and insert two AA batteries (not included) into the proper slots. Screw the cap back on, and proceed to power on the microphone as directed above.

How to use PA mode
When there is no music playing, this machine can be used to make PA announcements. Simply speak into a microphone by ensuring that it is properly connected as instructed above.

How to transport
The Festoso X9 was designed intentionally with wheels at the bottom for easy transportation. Simply unplug all wires and extend the handle on the machine to roll it around just like a suitcase. Place the microphones in the holsters. The machine can also be carried using the sturdy handles on each side.

Music

How to set up playback modes
Your machine has four different playback modes: Bluetooth, AUX, USB, and PA. Each has its own set-up method. See the “Con­tent/Parts” section above for input locations and the relevant subsections for more information on how to set up your preferred playback mode.

How to connect to Bluetooth (using your smart device)
When powered on, the machine’s LED screen will read “HI.” Next, it will read “BLUE” and the machine will say “Bluetooth Mode.” To connect to Bluetooth, simply search for the machine name “MASI NGO” under your playback device’s Bluetooth connection settings and connect as you would any other Bluetooth device. Once connected, the machine will say “Bluetooth Connected.” To ensure contin­uous stability of the signal, keep the speaker and mobile device near, no more than 10 meters apart.

Caution:
Do not turn your smart device volume to maximum or damage to speakers may occur. Place your device volume at midrange and then adjust the volume using the Master Volume (11) knob on the machine. You may use both the controls on your smart device or the machine controls to play, pause, or switch between tracks.

How to start USB mode (Playing music from a USB drive)
Plug a USB drive into the USB-A Input (9). Once connected, press the Mode (73) button to switch to USB mode. The LED screen will read “USB” and the machine will say “USB mode.” If the USB device does not contain audio files, it will automatically switch back to Bluetooth mode or AUX mode. Press the Play/Pause (20) button to begin playing your music. Press the Previous (19) or Next (21) buttons to change tracks. Press the Play/Pause button again to pause the track.

Note:
The Mode button will only cycle through to USB mode if a USB drive containing audio files is connected. Press the Mode button repeatedly to cycle through each of the available modes.

How to start AUX mode
Connect a device using the included 3.5 mm AUX cable (26). Plug one end into your device, and the other end into the AUX input (8). Press the Mode (13) button until you reach AUX mode. The LED screen will read “LINE” and the machine will say “AUX mode.”

How to use multiple playback modes
To use playback modes interchangeably, simply activate each mode according to the instructions above, then press Mode (13) to switch between the inputs.

How to sing karaoke using your machine

1. Find a karaoke track of your preferred song online. Karaoke tracks are available for thousands of songs through various online karaoke music services. Many are also available for free on YouTube channels such as “Sing King,” etc. These services often include lyrics.
2. Stream it from your device via Bluetooth, download the track to USB, or connect a device via AUX cable.
3. Click/short-press the Mode button to set up your preferred playback mode.
4. Rock on!

Remote

How to use the Remote Controller
Under normal circumstances, the remote controller should aim directly at the machine, within 6 meters, and at a 30-degree angle. Ensure there are no obstacles between the remote and the machine. Keep the machine and the remote out of direct sunlight to avoid the interference of glare, which may affect the remote’s infrared signal. Replace the remote controller’s batteries regularly.

• How to repeat
  Click the Repeat (7) button once to enable “repeat once”-the setting that repeats the current song. Double-click the Repeat button to enable “repeat all”-the setting that repeats all songs in the playlist.

• How to jump to a track using Song Selection
  Song Selection allows you to enter the number of any song in your playlist to jump directly to that track while using USB mode. Enter the corresponding song number onto the keypad (2) of the remote.

• How to enable AUX Mode
  Click the AUX (3) button on the remote.

• How to skip to the previous or next song
  Press the PREV (4) and NEXT (5) buttons on the remote to navigate between tracks.

• How to enable Bluetooth Mode
  Click the BT (6) button on the remote.

• How to record
  Click the REC (7) button on the remote. Click it again to stop recording.

• How to mute
  Locate the Mute (8) button in the top right corner of the remote. Click it once to mute; click it again to unmute.

• How to switch between modes
  Click the INPUT (9) button on the remote. Each time you press it, the machine will cycle to a different playback mode and display the mode on the LED screen. There are four modes available, AUX, USB, and PA.

• How to increase or decrease the volume
  Click the VOL+ (10) and VOL- (12) buttons to increase or decrease the volume of the music.

• How to play/pause
  Click the Play/Pause (11) button in the middle of the remote to play or pause the music.

• How to use EQ mode
  Press the EQ (13) button on the remote. Each time you press it, the machine will switch to the next mode in the cycle.

• How to playback your recordings
  Press the RC PY (14) button on the remote to enable playback of your previous recordings. Press the Play/Pause (11) button to play or pause the recording. Use the PREV (4) and NEXT (5) buttons to navigate between recordings. Press the RC PY button again to disable playback.

App

How to use the MASINGO App
The Festoso X9 has its own mobile opp, giving you total control of your sound from your smart device. With the opp, it’s easy to adjust mic and guitar input settings, headset volume, live volume, get creative with sound effects, switch between playback modes, and more.

To download the app for Android devices, scan the QR code below using your phone’s camera app:

To download the app for Apple devices, scan the QR code below using your phone’s camera app:

The app will not be downloadable from the Google Play Store on Android phones or the App Store on iPhones. It will only be accessible from the QR code links above. To enable the download of apps from QR code links, follow the instructions below.

Android Phones

1. Navigate to Settings > Security.
2. Tap the option for “Unknown sources.”
3. Tap OK on the prompt message.
4. Tap “Trust.”

Apple iPhones

1. Open the Settings opp.
2. Scroll down and tap the “General” tab.
3. Tap “Profiles & Device Management.”
4. Tap the profile associated with the Festoso opp.
5. Tap “Trust” and then “Trust” again to confirm.

Home Page

• How to connect to the machine
  Open the App, click “Festoso X9 APP.” Click CONNECT to scan for Bluetooth devices. (Note: After successful connection, the logo icon will change from white to red.)

• How to adjust the Mic/Guitar Volume
  Tap the Mic/Guitar knob on the screen and scroll to the right to increase the volume.

• How to adjust Machine Volume
  From the home page, tap the Music knob and scroll to the right to increase the volume.

• How to Mute
  Tap the Mute switch to mute on/off. (When adjusting the amplifier/music volume, the mute function will be automatically off.)

Guitar/Microphone Channel Page

From the home page of the app, tap the arrow to the right of Guitar/Mic Volume. A new page, called Guitar/Mic Channel, will open.

• How to adjust Volume, Echo and Reverb
  Locate the controls for Volume, Echo, and Reverb at the top of the page. Tap each knob and scroll to the right to increase the controls.

• How to use Mic Effects
  From the home page of the opp, tap the arrow to the right of Guitar/Mic Volume. A new page, called Guitar/Mic Channel, will open. Scroll the vertical selector to choose between Reverb, Echo, and Reverb+Echo.

• What is Reverb?
  Reverb is an audio effect that increases the listener’s perception of the room’s size. Turn up the reverb to make your audio sound “bigger,” as though you were performing in a music hall instead of a living room.

• What is the Echo?
  Echo is a sound effect that results from sound waves reflecting off a hard surface. You’ve probably heard it before if you’ve ever visited a cave. The more you turn up the echo, the longer the repeti­tion of your voice will last.

• The combination of Reverb and Echo
  Creates a dreamy effect that makes you sound like a rock star!

• How to use Mic Priority
  From the home page of the opp, tap the arrow to the right of Guitar /Mic Volume. A new page, called Guitar /Mic Channel, will open. Tap the Mic Priority switch. This will dampen background music to allow the mic’s vocal inputs to be heard clearly. Use Mic Priority to speak easily over the music for announcements without having to pause the music your guests are enjoying.

• How to use EQ
  From the home page of the opp, tap the arrow to the right of Guitar /Mic Volume. A new page, called Guitar /Mic Channel, will open. At the bottom of the page, you’ll find EQ controls. Tap each control to adjust the frequency until you’ve achieved your preferred sound. Tap the Reset button to return all settings to zero.

Music Channel Page

From the home page of the app, tap the arrow to the right of Music. A new page, called Music Channel, will open.

• How to return to the previous page
  Click “Home” to return.

• Music Volume
  Adjust the volume by manually rotating the music volume knob on the channel page (clockwise to increase, counter­clockwise to decrease).

• Song selection
  Song Selection allows you to enter the number of any song in your playlist to jump directly to that track while using USB mode. Enter the corresponding song number on the USB drive and click OK to jump to that song.

• Input channel selection
  Select an available input with one tap: AUX, BT (Bluetooth). and USB.

  • AUX: Click the AUX option to enter AUX mode.
  • BT: Click the BT option to enter Bluetooth mode.
  • USB: Insert a USB drive into the machine, then click the USB option to enter USB mode. This mode can only be accessed if a USB drive is inserted.

How to Play, Pause, Skip, and Repeat Songs

• Previous and Next Song: Use the left arrow to skip back, and the right arrow to skip forward.
• Play/Pause: Use the Play/Pause option to play or pause your music.
• Repeat: Tap the arrows in a circle to set a song to repeat. It will play on repeat until you click repeat once again.

How to Record to a Device

• Start recording: Insert a USB drive into the machine, then tap the red Record button to enter recording mode. When using the external memory card for the first time, the system will automatically create a new file named
• VOICE/RECORD/REC. All subsequent recordings will follow the naming convention of REC0Ol, REC002, and so on.
• Stop recording: Press the INPUT or REC button to exit recording mode.
• Play recordings: Input USB card. If there are recording files on the USB card, press PLAY to play the recordings. Press the Prev (19) and Next (21) buttons on the machine to select the recording files.

How to use Karaoke Mode
Karaoke Mode is a unique function that allows you to add your voice over the audio tracks playing through the speaker. There are two versions of this mode. To activate “Classic Karaoke Mode”, which removes all vocals from the track, tap ACC. To activate “Auto Accompaniment”, which reduces the vocal only when someone is singing into the mic, tap AUTO ACC. To deactivate either Karaoke Mode, tap ORIGINAL.

EQ Balance
7 EQ segments can be adjusted by dragging the knobs up or down.

Reset
Return all values on the 7-segment EQ to 0db by clicking Reset.

Maintenance

How to clean

• Turn the machine and microphones off. Unplug the machine’s power adapter and disconnect any USB plug-ins.
• Gently wipe the outside of the machine using a clean, dry cloth. Keep all vents, buttons, and openings free of lint and dirt. Do not immerse the machine in water and do not use any harsh cleaners.

How to store
Charge the machine and microphones so that they are ready for next use. Make sure that the machine is clean and dry. Bind the power adapter and included cables individually and gently with electrician-approved fasteners. (Note: Do not wrap or fold against the natural bend of the cords or cable). Do not wrap the cord around the machine. Store the machine in a cool, dry place away from damaging elements.

For best results, clean and store the machine after each use.

Troubleshooting guide

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 75 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa­tion. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED Statement

This device complies with Industry Canada license-ex­empt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital appara­tus complies with Canadian CAN ICES-3 (B)/NMB-3(8).

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and com­pliance. This equipment complies with Canada’s radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 0cm between the radiator & your body.

Warranty

90-DAY LIMITED WARRANTY

Don’t end things on a bad note
We’re here for you.

If you encounter any issues with your machine—or if you have any questions or comments—please feel free to contact us. Have your warranty information on hand for faster service.

• 1844-262-7464
• support@masingo.com
• www.masingo.com.

Love your new machine?
We want to hear about it!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>