EJEAS V7 Motorcycle Bluetooth Helmet Intercom User Manual
- June 3, 2024
- EJEAS
Table of Contents
Motorcycle Bluetooth helmet intercom
V7 USER MANUALS
V7 Motorcycle Bluetooth Helmet Intercom
Bluetooth Intercom
| Bluetooth Music|
Auto phone receiving
Voice Assistant
| EUC Remote|
Support Mobile App
**Product installation
**
Operation Diagram
Click
| Double-click| Long-press| Long press
for 3 seconds|
Long press
for 5 seconds
**Power
**
ON/OFF
Please charge it before using
| ON
Press and hold (approx. 1s) < A Button/Power Button> u n t i l the red light
comes on with a
power-on tone. After switching on I n standby mode, the blue light flashes
slowly (0.1s on / 2s off).
Blue light flashes slowly
“Di,Di,Di”
---|---
| OFF
Single-press the
Indicator light off
|
Red light flashes rapidly 3 times when the battery is low. The device automatically turn off when the battery is ultra-low.
---|---
| The red light is always on when charging.
**Intercom function
**
Intercom pairing
| After switching on, press and hold (approx. 5 seconds) until the
red and blue
lights alternately flash. Wait to connect to another intercom;
or long press (about 3s) //
Red and blue lights alternatly flash
---|---
| The other V7 enters the pairing state using the same operation step, then
two V7 would pair
with each other.
Blue light flashing fast
Wait a few more moments and you will hear the “Di,Di,Di” tone.
At this point you can talk to each other and hear each other’s voices.
Compatible with old model pairing steps
| Simultaneously press and hold (approx. 3 seconds)
<Volume – > + //< C Button>/< D Button>/
Or press and hold (for approx. 3 seconds) <Volume – > + <A Button +E Button>
(Intercom F )
Alternating red and blue lights
“Di, Di, Di”
---|---
| For old models (V6/V4) follow the instructions to enter the pairing state,
and wait for successful pairing.
Blue light flashing fast
| Click again on //< C Button>/
Blue light flashing fast
Wait for a successful connection and start the intercom.
Intercom connection and disconnection
| Once the intercom has been paired, you can click on the corresponding
intercom
buttton //
(Intercom F ) to connect o r disconnect.
The buttons didn’t use for paring would have no reponse when press.
---|---
**Mobile phone pairing
**
This intercom supports connection to mobile phones for playing songs and making calls , and waking up voice assistants. Up to 2 mobile phones can be connected at the same time.
| After power on, press and hold (approx. 5s)
Pairing successful
Blue slow speed double flashing lights
“pi,Di,Di”
| Current battery level is displayed on the Phone’s Bluetooth icon
(Mobile phone HFP connection required)
---|---
Bluetooth reconnection with mobile phones
| After power on, it automatically connects back to the last paired
cellphone.
When there is no connection, click
cellphone.
---|---
Mobile control
Answering the phone
| When a call comes, wait 8s to answer automatically
---|---
Reject the phone | When a call comes, click the
---|---
End the phone| When on the phone, click on
Last num redial| When in standby/playing music, Press and hold for _
approx. 2s
Cancel redial | Redial in progress, click on
Telephone priority
Interrupts Bluetooth music and intercom when a call comes in, resumes after
ending up.
Voice assistant
Double-click the
Music control
Handle EUC (optional)
Key descriptions
| Pushbuttons | Actions | Function |
|---|---|---|
| Volume – | Short press | Volume – |
| Long press | Previous song when music is playing. | |
| Double click | None | |
| Phone Button | Short press | Answer the phone when it comes a call, hang up |
Music play/pause When no mobile phone is connected Connect the last connected
phone
Long press| Reject calls Voice assistant
Double click| Last number redial
Volume +| Short press| Volume +
Long press| Next song when music is playing.
Double click| None
Intercom Button A| Short press| Intercom A pairing
Long press| Disconnecting the intercom
Double click| Intercom D pairing
Intercom Button B| Short press| Intercom B pairing
Long press| Disconnecting the intercom
Double click| Intercom E pairing
| Pushbuttons | Actions | Function |
|---|---|---|
| Intercom Button C | Short press | Intercom C pairing |
| Long press | Disconnecting the intercom | |
| Double click | Intercom F pairing | |
| Volume – + Useless key | Super Long Press | Clear handle pairing records |
EUC pairing
| Press and hold
Red light and blue
“Di,Di,Di”
---|---
Pairing Successful ?
“Di,Di,Di”
(No successful pairing within 2 minutes, exit the pairing )
Clear pairing records
| Press and hold the FM Button + Volume- button for about 5s to clear the
record until the red and blue lights come on.
Until the red and blue lights come on
---|---
Firmware upgrades
Connect the product to the PC using USB. Download and open the “EJEAS
Upgrade.exe” upgrade software. Click on the “Upgrade” button to start the
upgrade and wait for the upgrade to complete.
Mobile App
- First time users download and install EJEAS SafeRiding Mobile App.
https://apps.apple.com/cn/app/id1582917433
| https://play.google.com/store/apps/details?id=com.yscoco.transceiver
---|---
2. Press and hold (approx. 5s)
Alternating red and blue lights flashing fast
- Open the APP, click on the Bluetooth icon in the top right corner, the interface shows the name of the intercom device searched, select the intercom device to be connected, click to connect.
(IOS system need to enter the phone pairing again, i n the system settings->Bluetooth, connect audio Bluetooth)
The next time you use the app, open it, click on the Bluetooth icon i n the
top right corner and click to select Intercom for connection from the paired
devices.
APP provides intercom group, music control, FM control, switch off, check
authenticity and other functions.
Restore Default Settings
| Press and hold
3 Quick Flashes
“Di,Di,Di”
---|---
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions,may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Documents / Resources
|
EJEAS V7 Motorcycle Bluetooth Helmet
Intercom
[pdf] User Manual
V7, 2A9G2-V7, 2A9G2V7, V7 Motorcycle Bluetooth Helmet Intercom, Motorcycle
Bluetooth Helmet Intercom, Bluetooth Helmet Intercom, Helmet Intercom,
Intercom
---|---