EMEET C965 Low Cost Smart Webcam User Guide
- June 4, 2024
- eMeet
Table of Contents
EMEET C965 Low Cost Smart Webcam
Connect to PC
(Windows&macOS)
eMeet One (1) Year Limited Warranty Limited one (1) Year Warranty with eMeet
proof of purchase. The warranty does not cover normal wear and tear or damage
caused by accidents or misuse. To protect your rights, please keep the proof
of purchase. For service, please contact us
+1888 959 5320 (EST 9:00am-5:00pm)
Support@emeet.ai www.emeet.ai
Safety Guide
Caution:
To avoid electrical shock, do not open the housing of this product. In
addition, users do not need to use the product’s internal parts. To repair the
product, please contact qualified maintenance personnel or mail the product to
our after-sales department.
- Please read this guide carefully.
- Please keep this guide.
- Please observe all warnings.
- Please follow all instructions.
- When cleaning this product, uSe a dry cloth only.
- Choking hazard- This product contains small parts. It is not suitable for children under the age of 3.
- Do not put this product near a heat source Such as a heating radiator, hot air regulator stove, or loudspeakers (including amplihers) that produce heat.
- Do not use this product if you must remain alert of your surroundings, for example, while driving a car or ridinga bike.
- Do not Submerge this product in water or expose it to a damp environment for a long period of time. Do not use this product when engaging in water sports, such aS swimming or surhng
- Please protect the USB cable. Do not step on or apply pressure on them. Do not pull on the products plug, socket or cable outlet.
- It is recommended that users use the accessories that have been specifed by the vendor.
- When not using the webcam, please unplug the device from the USB port and turned off the power.
- TO repair the product, please contact our professional maintenance personnel. If the product is damaged, the product should be repaired. For example, it the power cable or plug is damaged, liquid has flowed into the product an object has fallen into the product the product has come into contact with rain or moisture, the product cannot operate correctly, or if the product has failed.
EU/UK Compliance (Corded equipment only)
Hereby, SHENZHEN EMEET
TECHNOLOGY CO, LTD. Corporation declares that this device is in compliance
with the essential requirements and other relevant provisions of Directive
2014/30/EU and Electromagnetic Compatibility Regulations 2016. A copy of the
EU/UK Declaration of Conformity is available at
http://www.emeet.ai/Certifcate.html.
CE
The suitable temperature for the product
and accessories is 0-40 C.
Manufacture Name: SHENZHEN EMEET
TECHNOLOGY CO., LTD. Manufacture Address: Unit 2C, Building A6, Guangming
Science Park, Guanguang Road 3009, Guangming District, Shenzhen, China
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized- modifications or changes to this
equipment. Such modifications or changes could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the
following measures:
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
ISED Compliance
This device complies with Industry Canada license-exempt RSS standard/s).
Operation is subject to the following two
conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation of the device.