EMEET E1101 OfficeCore M3 Bluetooth Speakerphone User Manual
- October 27, 2023
- eMeet
Table of Contents
- Product Overview
- Power on/off
- VoicelA Button
- MIC Mute Button
- Answer/End Phone Call Button
- Volume+/Volume- Button
- Bluetooth Connection
- USB Connection
- Bluetooth Dongle Connection
- Headset Connection
- Daisy Chain Cable
- Lock Port Setting
- Charging
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
EMEET E1101 OfficeCore M3 Bluetooth Speakerphone User Manual
Product Overview
Power on/off
Power on/off
- Press and hold the power button — power on/off
Check battery level
- Short press the power button when powered on — the LED ring-indicator indicates the battery level.
Low battery warning
- In power-on state, the LED ring-indicator turns red.
VoicelA Button
- VoicelA is a noise-cancelling algorithm independently developed by EMEET.
- Short press – turn on/off VoicelA intelligent noise reduction
- Turning on VoicelA noise reduction can greatly reduce some noises during meetings, such as from keyboard tapping, air conditioning noise, and general unwanted background noise.
MIC Mute Button
-
Press– mute/unmute MIC
-
When the MIC is muted, the LED ring-indicator turns red
Answer/End Phone Call Button
- Incoming call– press — answer a call
- Incoming call — press and hold — reject a call
- Call going– press/press and hold — end a call
Volume+/Volume- Button
Volume+
- Press — volume+ — volume up — LED ring-indicator turns blue
Volume-
- Short press — volume- –volume down — the LED ring-indicator turns blue
Bluetooth Connection
Bluetooth pairing
-
Press and hold the Bluetooth button — Enter Bluetooth pairing mode– Bluetooth paired — the Status indicator remains steady blue
-
Bluetooth not paired — the Status indicator flashes blue
Bluetooth turned off -
Short press the Bluetooth button — Bluetooth turned off — the Status indicator remains steady white
Bluetooth reconnected -
Bluetooth disconnected — Press Bluetooth button — Bluetooth reconnected.
Note:
- When the product is turned on, it will reconnect to the last successfully connected device via Bluetooth (if enabled on the device).
- Bluetooth turned off means it can not be found.
USB Connection
-
Connect to your computer by using a USB cable.
-
Connect to your computer by using a USB cable.
Bluetooth Dongle Connection
- Connect to your computer by using a USB Dongle. Plug-and-play is supported when the device is on.
- When the Bluetooth dongle is connected, the Status indicator turns blue.
| Status | Bluetooth dongle indicator |
|---|---|
| During pairing | Flashes blue rapidly |
| Pairing successful | Steady blue |
| Reconnection | Flashes blue slowly |
| Skype for business incoming call | Flashes green |
| Call going | Steady green |
| Mute | Steady red |
| Low battery alarm | Flashes red rapidly |
Headset Connection
- Connect to the headset jack using a 3.5mm headset cable.
- When the headset is connected, the Status indicator turns yellow (not connected to Bluetooth or USB cable).
Note: When the headset is connected, the speaker is automatically muted.
Daisy Chain Cable
- Daisy-Chain can be carried out by connecting the LINK ports of two products using a Daisy Chain cable.
- The Status indicator turns ice blue when Daisy Chain is connected.
Note: EMEET Daisy Chain cables must be purchased separately.
- Support meetings of 8 people before dasiy-chain.
- Support meetings of 16 people after dasiy-chain.
Lock Port Setting
- Lock the product through the LOCK port to prevent theft.
Note: The LOCK port is of a Kensington type which requires the users to buy a lock otherwise.
Charging
| Action | Status indicator | Induction |
|---|---|---|
| Charging in power-off state | Flashes yellow |
Fully charged in power-off state| Steady yellow|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>