EMEET OfficeCore M2 Conference Wireless Speakerphone User Manual

EMEET OfficeCore M2 Conference Wireless Speakerphone

WHAT IN THE BOX

Buttons

1. Al noise reduction On/Off
2. Bluetooth button
3. Answer/End Call
4. Volume up
5. Volume down
6. Mic Mute/Unmute
7. Power On/Off
8. LED Status Indicator
9. LED Ring-shaped
10. Lock port
11. AUX audio input port
12. Audio output/Daisy chain port
13. USB port
14. Microphone

Button Controls

LED Status Indicator

LED Ring-shaped

How to use

Power On/off
Press and hold the power button” “for 2 seconds to power on or off.

Connection

• After connect the device to a PC via USB, start to use it.
• After connect it to the PC through eMeet Audio Adapter A200, start to use it.
• After connect mobile devices such as PCs or mobile phones through Bluetooth pairing, start to use it.

Note:
When turning on the device, it will connect to the last computer/mobile phone via Bluetooth whilst it is active.

The names of Bluetooth in different products models are different:

Al Noise Reduction

Short press the” ¢ “Al Noise Reduction button to enable/disable the Al noise function. Turning on VoicelA noise reduction can greatly reduce some noises in the meeting scene, such as from keyboard tapping, air conditioning noise, and general unwanted background noise

Note: After the noise reduction mode is enabled, in order to maintain a good sound pickup effect, please make a call within a sound pickup range of 1.5 meters.

Charge

• Via the computer
• Through the adapter

Warning: Use UL certified ITE power supply only, the rated output is 5VDC, minimum 1A. Using other power sources invalidates the approvals for this device and triggers potential danger.

Check Battery level

Short press ” “to check Battery level. When the device reaches 5% battery level, the ring-shaped light will glow red, and a low battery prompt will be generated.

Audio Output

Use the AUX cable to connect the external speaker to the AUX OUT port of this device, and the audio will be played synchronously with this device through the external speaker.

Daisy chain function

The Daisy chain function requires the use of Daisy chain cable, which are inserted into the OUT port (Red terminal) of the two machines using Daisy chain cable to extend the distance of sound pickup and playback so as to get a larger meeting space.

Note: Daisy-Chain cable is not provided with the M2 products.

Audio Input

Use the AUX cable to connect the phone to the AUX IN ports of this device. This device will replace the speaker and microphone of the phone.

LOCK port Setting

Lock the product through the LOCK port to prevent theft.

Note: The LOCK port is of a Kensington computer type which requires the user to buy a lock otherwise.

Product information

Note: In case of any change in specifications, official website information shall prevail.

FAQ

Problem or phenomenon| Po ss ible Cau s es| Method
---|---|---
Startup failure| Low or no battery| Access the adapter to charge
Automatic shutdown soon after starting up| Low battery| Access the adapter to charge

No sound

| ****

turn off the volume

| ****

Adjust the device volume

USB fa ilure

| ****

Error with using USB cable

| Please use the original USB cable

AUX failure

| ****

Error with using AUX cable

| Please use the original AUX cable

Daisy chain failure

| Plug in the AUX audio input port; Error with using Daisy chain cable| Please plug the original Daisy chain cable into the audio output port/ Daisy chain port

Device charge failure

| Faulty charging device or full batt ery| Replace with a functional device

Customer Service

• support@emeet.ai
• www.emeet.ai
• US: + 1 8889595320(EST 9:00am-5:00pm Mon-Fri)

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>