somfy TLW25ZB Tilt and Lift 25 WF Zigbee User Manual

June 17, 2024
somfy

TILT &LIFT 25 WF ZIGBEE
Short installation guide
ORIGINAL INSTRUCTIONS

TLW25ZB Tilt and Lift 25 WF Zigbee

Complete instruction guide available online on www.somfy.info
From the Application “Help me by Somfy” scan the QR code here to find complete setting instructions.

somfy TLW25ZB Tilt and Lift 25 WF Zigbee - QR codetiltlift25wfzigbee

“Help me by Somfy” available on stores Do not unplug the battery when the motor works.somfy TLW25ZB Tilt and Lift 25 WF Zigbee -
icon

START UP

  1. To set the drive, download “TaHoma pro” application available on stores DRIVE SETTING
    Once the “TaHoma pro” application is downloaded, open the app and follow the instructions to set the drive.somfy TLW25ZB Tilt and Lift 25 WF Zigbee -
icon4 USE

  2. This drive does not require any maintenance operation.somfy TLW25ZB Tilt and Lift 25 WF Zigbee - parts2 DRIVE RESETTING

  3. This reset deletes all programmed control points, all sensors, all end limit settings and resets the favourite (my) position for the drive.somfy TLW25ZB Tilt and Lift 25 WF Zigbee - parts3

INSTRUCTIONS TO BE RESPECTED

These instructions apply to all TILT& LIFT 25 WF ZIGBEE drive, the different versions of which are available in the current catalogue.
FIELD OF APPLICATION
The C25 drives are designed to motorise all types of:
— Interior vertical blinds which front rail moves solely by gravity with a mass less than 15 kg.
LIABILITY
Please read these instructions carefully before installing and using the drive. In addition to following the instructions given in this guide, the instructions detailed in the attached Safety instructions document must also be observed.
The drive must be installed by a motorisation and home automation professional, according to instructions from Somfy and the regulations applicable in the country in which it is commissioned. It is prohibited to use the drive outside the field of application described above. Such use, and any failure to comply with the instructions given in this guide and in the attached Safety instructions document, absolves Somfy of any liability and invalidates the warranty.
The installer must inform its customers of the operating and maintenance conditions for the drive and must provide them with the instructions for use and maintenance, and the attached Safety instructions document, after installing the drive. Any After-Sales Service operation on the drive must be performed by a motorisation and home automation professional.
If in doubt when installing the drive, or to obtain additional information, contact a Somfy adviser or go to the website www.somfy.com.
SAFETY INSTRUCTIONS FOR WIRING
Cables which pass through a metal wall must be protected and isolated using a sheath or sleeve.
Attach cables to prevent any contact with moving parts.
If the drive is used outdoors, and if the power supply cable is a type HOS-VVF cable, the cable should be installed in a UV-resistant duct, e.g. under a gland.
Leave the drive power supply cable accessible: the product must be easily replaceable.
Always make a loop in the power supply cable to prevent water entering the drive.
WARNING
To ensure electrical safety, this Class Ill drive must be powered by a «SELV» voltage source (Safety Extra Low Voltage).
The drive must be installed by a professionally qualified person (electrical specialist according to DIN VDE 1000-10) for drives and automations in the building services sector in accordance with the Somfy instructions and the applicable regulations in the country of commissioning.
Using this drive with any products which are not listed in the attached «Compatibility matrix» document shall also render invalid any Somfy warranty and release Somfy from any liability.
For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.
Improper using battery pack may cause overheat, fire, explosion, resulting in serious injury or death.
Do not expose the drive or battery to excessive temperatures.
There is a risk if terminals of the battery-operated drive or battery being short circuited by metal objects.
Ensure battery is fully charged prior to installation on site.

Frequency bands and Maximum power used
Power supply
Charging temperature| 2.4 GHz – 2.4835 GHz e-r.p. <63mW (USA, Australia, Canada] 12 V DC battery or SELV external power supply
O°C to 40°C
---|---

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by SOMFY ACTIVITIES SA is under license. Other trademarks and trade 6 names are those of their respective owners.

Reference Designation
1241674 TILT&LIFT 25 WF ZIGBEE
1241780 TILT&LIFT 25 WF ZIGBEE

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
FCC warning statement:
– This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
– This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
– Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC RF RADIATION EXPOSURE STATEMENT: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.
ISED WARNING STATEMENTS: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and any part of your body.
Apple and Apple logos are trademarks of Apple, Inc., registered in the U.S. and other countries.
iPad® and iPhone® are registered trademarks of Apple, Inc. App Store is a service mark of Apple Inc.
Android is a trademark of Google LLC.
https://developer.android.com/distribute/marketing-tools/brand-guidelines
Please separate storage cells and batteries from other types of waste and recycle them via the local collection facility.
We care about our environment. Do not dispose of the appliance with usual household waste. Give it to an approved collection point for recycling.

SOMFY ACTIVITES SA
50 avenue du Nouveau Monde, 74300 CLUSES FRANCE
www.somfy.com
Images are not contractually binding
100% recycled paper
Copyright © 2023. All rights reserved. SOMFY ACTIVITES SA, Societe Anonyme, capital 35.UUU.000 Euros, RCS Annecy, 303.970.230 – 06/2023
5170119B_Tilt & Lift 25 WF Zigbee.pdf 2
15/06/2023
11:01:44

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals