BANNER WLB32 Series Industrial PoE LED Light Instruction Manual
- June 17, 2024
- BANNER
Table of Contents
BANNER WLB32 Series Industrial PoE LED Light
Features
Banner’s WLB32 is an ultra-bright LED fixture with an even light output for a no-glare ‘glow’. Suitable for a variety of environments and applications, including workstations, machine lighting, control cabinets, and manufacturing lines, the WLB32 uses advanced LED lighting technology to provide a high- quality and maintenance-free industrial lighting solution for years.
- Cost-effective luminaire for use when AC power or a DC power supply are not available
- Connect directly to a Power over Ethernet (PoE) enabled port on a managed or unmanaged Ethernet switch
- 285 mm and 570 mm models compliant with PoE (Class 0 – 802.3af, 802.3at Type 1) hardware negotiation 850 mm and 1130 mm models compliant with PoE+ (Class 4 – 802.3at Type 2) hardware negotiation
- Dimming knob with 11 intensity settings between 0-100%
- Metal housing, shatterproof window
- Easy installation with snap clips included
IMPORTANT: Read the following instructions before operating the light. Please download the complete WLB32 Industrial PoE LED Light technical documentation, available in multiple languages, from www.bannerengineering.com for details on the proper use, applications, Warnings, and installation instructions of this device.
Models
Models| Lighted Length (mm)| Window| Connector|
Lumens
---|---|---|---|---
WLB32EX285PQ| 285|
Standard
|
Integral 4-pin M12 quick-disconnect connector
| 750
WLB32EX570PQ| 570| 1500
WLB32EX850PQ| 850| 2250
WLB32EX1130PQ| 1130| 3000
WLB32EX285EPQ| 285|
Eye Shield
| 750
WLB32EX570EPQ| 570| 1500
WLB32EX850EPQ| 850| 2250
WLB32EX1130EPQ| 1130| 3000
Wiring
WLB32 Industrial PoE LED Light Instruction Manual
Specifications
Supply Voltage 42.5 V DC to 57 V DC
Supply Protection Circuitry
Protected against reverse polarity and transient voltages
Light Characteristics
- Color: Daylight white
- Color temperature (CCT): 5000K (±300K)
- Lumen output: 750 (±5%) per foot, typical at 25 °C (77 °F)
- Luminous efficacy: 120 lumens/Watt typical at 50 V DC at 25 °C (77 °F)
- CRI: 80, minimum
Spacing Criterion
- Vertical: 1.22
- Horizontal: 1.32
Mounting
Snap clips; optional magnetic mount or swivel bracket accessories available
Connections
Integral 4-pin M12 quick disconnect (4-pin connecting cordset required)
Environmental Rating
IP40
LED Lifetime
Lumen Maintenance – L70 When operating within specifications, output will
decrease less than 30% after 70,000 hours.
Construction
Anodized aluminum housing; polycarbonate window and end caps; stainless steel
mounting brackets
Dimming Knob
10 levels of intensity adjustment Off position
Vibration and Mechanical Shock
Vibration 10-55 Hz 1.0 mm p-p amplitude per IEC60068-2-6 Shock 15G 11 ms
duration, half sine wave per IEC60068-2-27
Operating Temperature
–40 °C to +50 °C (–40 °F to +122 °F)
Storage Temperature
–40 °C to +70 °C (–40 °F to +158 °F)
Test Data
LM-79, LM-80, TM-21
Supply Current
Lighted Length (mm)
| Typical Current (A)| ****
Max Current (A)
| ****
Max Wattage (W)
| ****
Power over Ethernet Specification
---|---|---|---|---
42.5
V DC
| 50 V DC| 57 V DC
285| 0.155| 0.14| 0.13| 0.17| 7.25| PoE (Class 0 – 802.3af,
802.3at Type 1)
570| 0.29| 0.245| 0.23| 0.305| 12.95
850| 0.445| 0.375| 0.34| 0.455| 19.45| PoE+ (Class 4
– 802.3at Type 2)
1130| 0.58| 0.485| 0.44| 0.59| 25
Application Note
WLB32 PoE models can be powered directly from a 42.5 to 57 V DC power source
without using an Ethernet switch
Required Overcurrent Protection
WARNING: Electrical connections must be made by qualified personnel per local and national electrical codes and regulations.
Overcurrent protection is required to be provided by end product application per the supplied table. Overcurrent protection may be provided with external fusing or via Current Limiting, Class 2 Power Supply. Supply wiring leads < 24 AWG shall not be spliced. For additional product support, go to www.bannerengineering.com.
Supply Wiring (AWG)| Required Overcurrent Protection
(A)| Supply Wiring (AWG)| Required Overcurrent
Protection (A)
---|---|---|---
20| 5.0| 26| 1.0
22| 3.0| 28| 0.8
24| 1.0| 30| 0.5
Certifications
Banner Engineering BV Park Lane, Culliganlaan 2F bus 3 1831 Diegem, BELGIUM
Turck Banner LTD Blenheim House | Blenheim Court |Wickford, Essex SS11 8YT | Great Britain
FCC STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to protect reasonably against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used per the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Industry Canada ICES-003(B)
This device complies with CAN ICES-3 (B)/NMB-3(B). Operation is subject to the
following two conditions: 1) This device may not cause harmful interference;
and 2) This device must accept any interference received, including
interference that may cause undesired operation.
Dimensions
All measurements are listed in millimeters [inches], unless noted otherwise.
| Models | L1 | L2 |
|---|---|---|
| WLB32EXW285..Q | 298 mm (11.7 in) | 309 mm (12.17 in) |
| WLB32EXW570..Q | 580 mm (22.8 in) | 591 mm (23.27 in) |
| WLB32EXW850..Q | 862 mm (33.9 in) | 873 mm (34.37 in) |
| WLB32EXW1130..Q | 1144 mm (45.0 in) | 1155 mm (45.47 in) |
Light Characteristics
Accessories
Cordsets
Mounting Brackets
LMBWLB32
- Replace the bracket that ships with the WLB32 light
- Stainless steel
- Includes 4 snap clips, 4 screws, and 2 insulator caps
LMBWLB32-180S
- The swivel bracket kit allows 180° of movement
LMBWLB32MAG
- Magnetic mounting bracket for easy attachment to steel and iron surfaces
LMBWLB32U
- Die-cast bracket for rugged applications
- Secured to light with included thumb screw
- Clearance hole for 6 mm (1/4 in) button head screw
LMBWLB32UT
- Die-cast bracket for rugged applications
- Secured to light with included thumb screw
- Integral 1/4-20 stud for mounting
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover damage or liability for misuse, abuse, or improper application or installation of the Banner product. THIS LIMITED WARRANTY IS EXCLUSIVE AND INSTEAD OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER THE COURSE OF PERFORMANCE, COURSE OF DEALING OR TRADE USAGE. This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO THE BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp. Any misuse, abuse, or improper application or installation of this product or use of the product for personal protection applications when the product is identified as not intended for such purposes will void the product warranty. Any modifications to this product without prior express approval by Banner Engineering Corp will void the product warranties. All specifications published in this document are subject to change; Banner reserves the right to modify product specifications or update documentation at any time. Specifications and product information in English supersede that which is provided in any other language. For the most recent version of any documentation, refer to: www.bannerengineering.com. For patent information, see www.bannerengineering.com/patents. Mexican Importer Banner Engineering de Mèxico, S. de R.L. de C.V. | David Alfaro Siqueiros 103 Piso 2 Valle oriente | San Pedro Garza Garcia Nuevo Leòn, C. P. 66269 81 8363.2714
-
Document title: WLB32 Industrial PoE LED Light Instruction Manual
Part number: 217743 -
Revision: C
Original Instructions
- Banner Engineering Corp. All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>