NEMO Aurora Series 2 Person Backpacking Tent User Guide

NEMO Aurora Series 2 Person Backpacking Tent

Specifications

Installation Instruction

Setup Process

1. Lay out the tent body on the desired area.
2. Insert the tent poles into the grommets at each corner of the tent, ensuring the poles are fully seated.
3. Raise the tent structure by arching the poles and attaching the tent body to the poles via the clips.
4. Once the tent body is fully clipped to the poles, the basic structure of the tent should be standing.
5. Stake the tent into the ground at all corners, pulling the tent taut.
6. Attach the rainfly if necessary by securing it over the tent body and fastening it to the poles or tent corners.

FAQ

• Where can I find additional setup instructions or product support?
  • Additional setup instructions or product support can be found on the NEMO Equipment website or by scanning the QR code provided on the setup instructions.
• What should I do if I encounter difficulty with the tent pole setup?
  • If you have difficulty with the tent pole setup, ensure that each pole end is fully inserted into the grommets and that the poles are correctly arched before attaching the tent body via the clips.
• Can the tent be set up by one person?
  • Yes, the tent is designed to be set up by one person, though having an additional person may simplify the process.
• How do I attach the rainfly?
  • The rainfly can be attached by securing it over the tent body and fastening it to the poles or tent corners, ensuring it is taut and secure.

Visual Diagram Description

The setup instruction sheet includes a series of six diagrams illustrating the tent setup process:

1. The first diagram shows the tent body laid flat on the ground with the corners highlighted, indicating where the poles should be inserted.
2. The second diagram provides a close-up of a tent pole being inserted into a grommet at the corner of the tent body.
3. The third diagram illustrates elevating the tent structure by bending the poles into arches with the tent body attached via clips.
4. The fourth diagram depicts the tent standing upright with the poles fully arched and the tent body clipped on.
5. The fifth diagram shows the tent being staked into the ground at the corners.
6. The sixth diagram features the attachment of the rainfly over the tent structure.

• www.nemoequipment.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>