NEMO BLUG3001 LUX Garden Outdoor Spot 17°46° Instructions
- June 5, 2024
- NEMO
Table of Contents
NEMO BLUG3001 LUX Garden Outdoor Spot 17°46°
Box contents
Installation
Slacken lightly the locking pin. Let slide and adjust the position on the rod tighten the pin again.
Example of connection (serial connection)
- Verify the input tension supported from drivers.
- Use a SELV driver.
CAUTION
OUTDOOR LUMINAIRE
Installation should be carried out by a suitable qualified installer. /
Disconnect main voltage before maintenance operation / All wiring and
maintenance must be performed with the main switch in the OFF position / Don’t
open the luminaire. Connect the fitting to the power supply only after
connecting all LED to the driver (when expected) / In case of failure, upon a
return
authorization of NEMO Studio, the product will be not neither open or
dismounted and the cable must be cut leaving at least 10/15cm / Make the
wiring using a system that
guarantees at least the IP grade of the spot. / Se proviso, use only bulbs of
suitable type and power specified in the label / Do not install fixture in
environment with presence of chlorine, salt air or aggressive agents, if not
expressly mentioned. / The color temperature (CCT) of LED sources can be
different from the declared nominal value within a range of ±5%. / NEMO
reserves the right to make any technical or formal alterations to its products
without giving prior notice, especially for LED sources. / We recommend you to
keep instructions for further consultations.
- For a proper operation, the fitting requires its protective undamaged glass.
Lamping
This luminaire contains built-in LED lamps.
NEMO Studio
Ilti Luce Srl – Strada Borgata Paradiso 20 – 10036 Settimo Torinese (TO) ITALY
Tel +39 011 7657301
nemostudio@nemolighting.com
nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.