NEMO BLUX0201 LUX Outdoor underwater Spot Installation Guide
- June 5, 2024
- NEMO
Table of Contents
NEMO BLUX0201 LUX Outdoor underwater Spot
CAUTION
OUTDOOR LUMINAIRE
Installation should be carried out by a suitable qualified installer. /
Disconnect main voltage before maintenance operation / All wiring and
maintenance must be performed with the main switch in the OFF position / Don’t
open the luminaire.
Connect the fitting to the power supply only after connecting all LED to the
driver (when expected) / In case of failure, upon a return authorization of
NEMO Studio, the product will be not neither open or dismounted and the cable
must be cut leaving at least 10/15cm / Make the wiring using a system that
guarantees at least the IP grade of the spot. / Se proviso, use only bulbs of
suitable type and power specified in the label / Do not install fixture in
environment with presence of chlorine, salt air or aggressive agents, if not
expressly mentioned. / The color temperature (CCT) of LED sources can be
different from the declared nominal value within a range of ±5%. / NEMO
reserves the right to make any technical or formal alterations to its products
without giving prior notice, especially for LED sources. / We recommend you to
keep instructions for further consultations.
- For a proper operation, the fitting requires its protective undamaged glass.
Lamping
- This luminaire contains built-in LED lamps.
- The LED and the cables cannot be changed in the luminaire from the end user. Please contact NEMO STUDIO (only authorized center).
- This product contains a light source of energy efficiency class
(5000K) – (2700-4000K)
NEMO Studio
nemostudio@nemolighting.com –
nemolighting.com
Copyright © 2020 NEMO Srl Milano, Italia.
The text and images are protected by copyright.
Unauthorized reproduction.