LaserPecker LP4 4 Rotary Extension User Manual
- June 17, 2024
- LASERPECKER
Table of Contents
LaserPecker 4 Rotary Extension
User Manual
After-Sales Services
- Technical support for this product is available globally.
- Please contact us if you encounter any problem with your LP4 and we will get back to you as soon as possible.
- Email ：support@laserpecker.com
- Tel: +86 0755-28913864
Online User Community
- LaserPecker’s huge online global community connects our diverse group of dedicated users and offers support, inspiration, and a showcase for sharing creativity.
- Facebook : LaserPecker 4
https://www.facebook.com/groups/laserpecker4
Component Overview & Descriptions
Quick Installation
-
Assemble the Riser Add-on
Tighten the two screws to assemble Riser Add-on between LP4 Laser Unit and Electric Stand.
*Make sure the Safety Shield is assembled before this step. For details, please refer to LP4 User Manual.
-
Assemble the Rotary Headstock
Attach Rotary Headstock Head to Headstock Baseplate with 4 pcs of M3x10 screws and the Hex Key.
-
Headstock Assembly
① Double-step Jaws Installation
Attach three double-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws.
② Single-step Jaws Installation
Attach three single-step jaws to the rotary chuck using the wrench and 6 pcs of M3x6 screws.
③ Stud Component Installation
Attach three stud components to the rotary chuck.
-
Rotary Extension Assembly
-
Stabilize the Rotary Extension
Put the Elevation Pad under the Rotary Headstock to make it more table.
Quick Start Guide
Turn on Mode Settings>Rotary Extension on the app, adjust the height and angle
of the rotary.
Choose an image, set its size and position, start previewing, set the
engraving power and depth parameters, and start engraving.
-
Turn on the Rotary Extension button.
-
Turn the knob on the tailstock stand clockwise or counterclockwise to adjust height.
-
When the diameter of the carved object/sphere is too large, turn the gear to adjust the opening of the chuck jaws
Product Specification
| Size | 30810899mm |
|---|---|
| Weight | 1.7kg |
| Chuck diameter range | 52mm-80mm |
| Engraving maximum diameter | 200mm |
| Appearance | Anodic oxidation of aluminum alloy |
| Engraving diameter range (Double-step Jaw) | Omm-128mm |
| Engraving diameter range (Single -step Jaw) | 66mm-145mm |
| Engraving diameter range (Stud Component) | 13mm 78mm |
| Operating system | Support iOS 9.0+, Android 6.0+, MacOS 10+, Windows 10+ |
| Power input | 5V/1A |
| Precise control | 0.014° |
| Idling movement speed | 140.625 degrees/second |
| Fastest engraving speed | V= 360/200/128/0.00012=117.1875 degrees per second |
| Slowest engraving speed | V= 360/200/128/0.00012=117.1875 degrees per second |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>