LaserPecker LX1 Max Powerful Laser User Manual

: June 13, 2024
: LASERPECKER

Table of Contents

LaserPecker LX1 Max Powerful Laser
Product Information
Speciﬁcations
Product Accessories List
Get to Know LX1 Max
LX1 Max Fast Assembly
Diagram Power Interface Connection
LED Indicator Description
Software Connection
Set Focal Length
Machine Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LaserPecker LX1 Max Powerful Laser

Product Information

After-Sales Services
Technical support for this product is available globally. Please contact us if you encounter any problems with your LX1 Max and we will get back to you as soon as possible.

Email : support@laserpecker.com
Tel : +86 0755-28913864

APP Software Download
NOTE: After installing the APP, please read all warnings and instructions carefully to ensure safety and the correct operation of the product.

Download the Windows/Mac software from the Oﬃcial LaserPecker website.

Download the LightBurn software from the oﬃcial website: lightburnsoftware.com

Discl aimer

Dear LaserPecker user
Thank you for purchasing LaserPecker LX1. This manual relates to your safety, legal responsibilities and rights. Please read carefully and understand the manual before use. Failure to follow the instructions in the manual may result in personal injury, low quality of engraving, or damage to the device and surrounding objects. Please make sure the product operator understands and is familiar with the manual to maximize the value of the product. Using this produce shall be deemed to have carefully read the full text of the product manual, and to understand, acknowledge and accept all the terms and conditions of Disclaimer. Personal injury, property or product damage caused by the user’s improper operation or failure to operate according to the product instructions shall be borne by the user, and Shenzhen Hingin Technology Co., Ltd. shall not be held responsible.

When using LaserPecker product, you should

Install, carry, store, operate, maintain and dispose of the product according to the manual and the provisions of relevant laws and regulations and safety standards.
Ensure that the ﬁnished work do not breach the intellectual property rights of any third party or violate the provisions of relevant laws and regulations.

Given the conditions and methods of use of this product are beyond LaserPecker’s control, the consequences of any of the following circumstances shall be borne by the user and LaserPecker shall not be held responsible.

Personal injury, property or product damage caused by improper operation, failure to follow instruction manual or other uncertainties.
The work user created by LaserPecker prodects infringes the intellectual property rights of the third party or violate the relevant laws and regulations.
Personal injury, property or product damage arise during installation, carry, storage, usage, maintenance and disposal of this product.
All oﬃcial LaserPecker materials have undergone safety testing and are compatible with this product. LaserPecker shall not be liable for material safety or engraving quality if use with non LaserPecker oﬃcial materials..

Application
LX1 Max laser engraver and cutter oﬀers superior 4-in-1 performance, allowing various creation by laser engraving, cutting and drawing.

Safety
General Safety Information

The usage and speciﬁc application of this product, and emissions generated by engraving shall follow the laws and regulations of the user’s location.
Please use and maintain the product in accordance with the manual instructions to ensure safe operation. This product is for indoor use only. Do not place in a rainy or damp environment.
Please prepare a stable and ﬂat table or workbench for this product.
Minors of any age should not operate the product without adult supervision and assistance.
Please concentrate and pay close attention to operation process and changes in the surrounding environ-ment during use.
Do NOT operate the product when fatigued or under the inﬂuence of drugs, alcohol, or medication.
When the product is in operation, please do NOT touch the moving part, otherwise it may spoil your material.
Do NOT leave the machine unattended during operation.
Please cut oﬀ the power supply before switching to laser module.

In case of the following situations, please stop using the product and cut oﬀ the power supply immediately.

The product has a smell of burning odor.
Engraved material generates a large amount of fumes or open ﬂames. The internal components of the product have been damaged.
The product stops working accidentally.
The product generates unprecedented abnormal noise or light.

Laser Engraving Safety

Installation speciﬁcation: Before operating LX1, please secure the main unit based on the user manual. Please place the product on a stable and ﬂat table or workbench. The vibration of the machine will aﬀect the engraving quality.
Due to the risks of laser, do NOT bring minors or people without self-protection awareness close to the device in operation.
Before operating the laser module, you should have adequate knowledge of: physical properties of laser radiation, hazardous classiﬁcation of laser and relevant health implications and safety measures.
The laser module uses Class 4 lasers. The overall laser becomes Class 1 when paired with a laser protection cover as required and using the laser module correctly.
When operating the laser module, do NOT look directly at or touch the laser outlet, or expose your body to the laser.
It is recommended to correctly install and use the oﬃcial LaserPecker laser protection cover, which can eﬀectively ﬁlter the scattered laser light during laser engraving. After the laser protection cover is properly installed and powered on, its opening and closing states are linked to the laser emission, that is, the product will automatically stop laser engraving when the protection cover is opened to prevent laser leakage for your personal safety.
When the laser module is in operation, the material being engraved or cut may release toxic and harmful gases or smoke. Please make a comprehensive judgment based on the type and composition of the material, and use the product with an air puriﬁer or in a well-ventilated place.
Reﬂective materials can cause laser reﬂection and injury. Please remove all reﬂective materials from the work area before use and during operation. It is recommended to blacken the area to be engraved of the reﬂective material by a whiteboard marker beforehand.
Please power the device with the power and type (adapter with 24V 5A) as indicated in the user manual. Mismatched power adapter will cause the malfunction.
Before initiating the laser module, please make sure to take safety protection measures, such as wearing safety goggles to prevent eye or skin injury, removing irrelevant objects to prevent unnecessary damage caused by laser irradiation, and moving away ﬂammable and explosive objects to avoid ﬁre.
After initiating the laser module, do NOT move the device, otherwise it may cease operation for self-protec-tion, or even aﬀect the ﬁnal eﬀect of the engraving work due to displacement.

Laser Protection Cover Safety

Please make sure to disconnect the connection cable of the protection cover and main unit, and separate the device from the outer cover before moving the protection cover or the device.
Do NOT scratch, bend or break the acrylic plate and proﬁles, or open the cover reversely, as it will impair its protective performance and cause permanent damage to the cover as well as personal injury.
The protection cover top is designed as a double-door structure. Please do NOT place heavy objects over 5kg on the top.
Do not put any objects or body parts near or into the exhaust fan when in operation.
All wires must be placed away from the exhaust fan blades to avoid damage to the exhaust fan and other parts when in operation.
LP Air Puriﬁer can be connected to the exhaust fan to purify and ﬁlter the air inside the protective cover for your health.

Emergency Response
Please take the following measures when there is open ﬁre during engraving (LX1 is capable of detecting high temperature. The machine will cease operation when the temperature reaches 50°C).

Cut oﬀ the power supply
Douse the ﬂames with ﬁre extinguisher

Inhale smoke and particulate matter

Fumes and particulates that can irritate the respiratory system may be generated when engraving or cutting certain materials. It is recommend to use the product with an air puriﬁer or in a well-ventilated place. Please wear a protective mask if necessary.
If respiratory irritation or similar symptoms occur, immediately move the patient to a site with fresh air and seek medical help.

Safety Label

Switch Module
To switch the module, remove or add accessories, please turn oﬀ the main unit before plugging and unplug-ging the connection cable of the laser module.

Firmware Upgrade
You can upgrade the ﬁrmware online by connecting the LaserPecker APP to your device via Bluetooth. Update prompt for new ﬁrmware will show up when connecting the machine. It is recommended to upgrade the ﬁrmware to the latest version timely.

Detailed Step

Connect the LaserPecker APP to your machine.
Red notiﬁcation dot will show up in the Settings page when a new ﬁrmware is available.
Enter the interface and click Upgrade.。

Warranty Terms

For customers who purchased from oﬃcial LaserPecker sales channels, we provide a one-year warranty counting from the day customer recieve their products.
To the extent permitted by law, this warranty is exclusive and supersedes all other express or implied or legal warranty conditions (including in any case for a particular purpose, provided by the statute or any other circumstance), including, but not limited to, any liability derived the commodity suitable for a particular use. In addition, Hingin will not be responsible for any unexpected, special, indirect, or derivative damage (it may originate from use, misuse, nonuse, or product defects).
When consumers apply for warranty service, they have the obligation to back up all the important data in advance. The data will disappear during the maintenance process, such as the replacement of parts or the updated product software version, and Hingin will not provide data backup or the complete data and set value.
The product is entitled to free shipping and free maintenance warranty within 7 days of the shipping date. Express fee will be paid after 15 days in the warranty period.
For any products following the replacement or maintenance, Hingin will give a longer warranty of the remaining warranty period of the original product or the 30-day warranty following the replacement. When consumers apply Hingin for warranty services for the products sold in non-Chinese mainland areas, due to the laws and regulations, safety regulations, tariﬀs, maintenance technology and parts inventory, parts sold in countries and regions cannot be sent back to Hingin for warranty services, for which Hingin can only provide limited warranty services. Therefore, consumers not in mainland China, whether they are within the warranty scope, need to seek warranty services through the path authorized by the original country, and will charge the inspection and labor processing fees. If the country for the recipient levies additional tariﬀ, it will be borne by the consumer itself; Consumers who apply for warran-ty service directly to Hingin may take the similar measures.
Distributors may sell Hingin products to consumers in non-Chinese mainland areas. If they provide value-added services diﬀerent from this warranty, the services are valid only for the area sold by distribu-tors and unrelated to this warranty service.
Processing quality is highly related to user operation, processing material and processing environment, not within the warranty scope.
SUGG: Reselling the product without oﬃcial authorization is strictly prohibited, in which case the oﬃcial warranty shall not be eligible.

Copyright

The copyright of this manual involving the right of software and hardware of the product belongs to Shenzhen Hingin Technology Co., Ltd (hereinafter referred to as “Hingin”). LaserPecker is the registered trademark of Hingin.
The information in this manual is subject to change without notice. Please visit our oﬃcial website https://www.laserpecker.cn for latest update.
The contents of this manual shall not be rewritten or forwarded in any form or for any purpose without the written permission of the Company, except for use by the purchaser of this product.

Speciﬁcations

$LaserPecker-LX1-Max-Powerful-Laser $2$$

Product Accessories List

Standard Suit( Main unit+Single Laser Module)

Get to Know LX1 Max

Main Frame
Main Frame

LX1 Max Fast Assembly

Unbox the product
Rotate the two frame legs 90 degrees
Unscrew the screw lock of X axis
Rotate the X axis 90 degrees and screw the lock
Unscrew the screw lock of laser module, install the module to the holder
Unscrew the screw lock of laser module
Install the laser module to the holder
Screw the lock of laser module

Diagram Power Interface Connection

Connect as shown in the picture

LED Indicator Description

Solid Blue : Bluetooth is connected
Blinking Blue : Bluetooth is disconnected
Solid Green : In preview
Multi Color : Data is transmitting
Streaming Light : Engraving in progress
Blinking Yellow : Engraving stops
Alternative Flashing of Red and Green: Reset to factory settings Alternative
Flashing of Red and Blue : Firmware is being upgraded

Software Connection

Mobile APP Connection
After assembling the device and power on, open the oﬃcial application LaserPecker Design Space(LDS) and connect the device in the APP.

PC Software Connection
After assembling the device and powering it on, open the oﬃcial PC Software LaserPecker Design Space(LDS). Connect the device to the PC software via USB cable or oﬃcial Bluetooth dongle.

Set Focal Length

Focusing in Engraving Mode
When engraving, put the ranging rod to the lowest positionand make sure it’s button touches the surfaces of the material.

Focusing in Cutting Mode
Adjust the position according to thickness of material when cutting

Change Pen in Artist Module

Please refer to in-APP calibration for more calibration

Slide down the regulator to tighten up the pen
Slide up the regulator to change the pen

Machine Maintenance

Fill the back and bottom of the X axis with lubricant when the machine is stuck in operation.
The grease ﬁtting is behind the X axis and at the bottom of the Y axis. Move the laser head to the grease ﬁtting and align it with two to three drops of lubricant (it is recommended to add lubricating oil once every 3 months).8.Machine Maintenance

FCC Warning Statement : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

this device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co‐located for
operating in conjunction with any other antenna or transmitter.

IC Warning
This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent is otropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This device complies with Canadian ICES-003 & RSS-247.

Radiation Exposure: This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. IC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cmfrom all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.