kogan com KABBCMADDCA SmarterHome Pan and Tilt Smart Baby Monitor Security Camera User Guide
- June 15, 2024
- Kogan com
Table of Contents
**kogan com KABBCMADDCA SmarterHome Pan and Tilt Smart Baby Monitor Security Camera
**
COMPONENTS
OVERVIEW
Power: DC 5V/1A
Microphone: Captures sound for your video
SD card slot: Support local SD Card storage (Max.128G)
Status indicator: Solid RED: network is malfunctional Flashing RED: ready
for network connection (fast blinking) Solid BLUE: camera is working correctly
Notification/Pair: Pressing this button will send a pop-up notification
to your linked smartphone. Long press to pair with the monitor (not supplied).
Reset: Press and hold for 5 seconds to reset the camera (if you have
modified settings, they will return to factory defaults) and place it in Wi-Fi
pairing mode
INSTALLATION
Connection preparation
Bring the camera and your phone within 30 – 100cm of the router.
Insert the microSD card
Insert a microSD card (not supplied) into the SD card slot on the camera.
Camera Power Connection
- Connect the USB cable to the power input port on the camera and connect the other end into the power adapter.
- Plug the power adapter into an electrical outlet and turn it on, the status indicator will turn blue.
Mounting to wall/ceiling (masonry):
- Drill pilot holes and insert the supplied wall anchors first.
- Place the bracket against the surface, in line with the wall anchors, and secure it in place with the supplied screws.
- Attach the camera to the bracket.
Mounting to wall/ceiling (timber / dry wall):
- If not drilling into timber studs, drill pilot holes and insert the supplied wall anchors first
- Place the bracket against the surface, in line with the wall anchors (if used) and secure it in place with the supplied screws.
- Attach the camera to the bracket.
Alternatively, the camera can be placed on a clean, horizontal, flat surface.
CONNECT TO SMARTERHOME™ APP
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
To register:
- If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’.
- The system will automatically recognise your country. If needed, you can manually select your country from the drop-down box. Enter your email address and tap ‘Get Verification Code’ to continue.
- A 6-digit code will be sent to the submitted email address. Enter this code before the one-minute timer expires.
- Continue to the next page and complete your SmarterHome profile.
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (prompt tone will be heard and the indicator will be rapidly flashing red).
If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the reset button for 5 seconds until a prompt tone is heard and the indicator begins rapidly flashing red.
Add device through network
-
Once registered, tap “Add Device” on the app’s home page, or the “+” in the upper right corner, to add a new device through the network.
-
Select the product type from the list of options in the app (Home Security > Baby Monitor).
-
Ensure that the device is in pairing mode, with the prompt heard and light flashing, and tap “Next”.
-
Enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup.
Notes:- The device and the app have to use the same Wi-Fi network.
- The device is only compatible with 2.4Ghz networks.
- Depending on the product, Steps 3 and 4 may be in opposite order.
-
Calibrate the smart camera by holding your smartphone 15-20cm away from the camera lens until it successfully scans the QR code shown on the following screen of the setup. The device will make a prompt sound to confirm, click “I heard a prompt” to proceed to the next screen.
-
The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete.
-
After successfully being added, you will have the option to rename the device and assign it to a location. It will now be listed on the app’s home page. Tap the device listing to enter its control page.
Note:
Once connected, you can select Create Scene from the “+” in the upper right corner (or from the Scene tab) to group connected SmarterHome™ products and automate their functions.
GOOGLE HOME CONTROL
Note:
You will need to have set up a Google Home account prior to linking your Kogan
SmarterHome™ device.
Adding “SmarterHome” to the Google Home app
-
From the home page of the Google Home app, select the “+” icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’ page.
-
Select ‘Set up device’, then select the ‘Works with Google’ option.
-
Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Select “Kogan SmarterHome™” from the app options.
-
Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and your devices.
-
Once connected, the app will display any compatible devices linked to your SmarterHome™ account. From here you can assign them to rooms and set up any routines. Tap on any of the devices to view a list of available commands.
Note:
Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
AMAZON ALEXA CONTROL
Note:
You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.
Adding “SmarterHome” to the Alexa app
-
From the home page of the Alexa app, select the “ ” icon in the bottom-right and select “Skills & Games” from the sidebar.
-
Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ skill.
-
Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
-
From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
-
Select “Kogan SmarterHome™” from the app options.
-
Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and your devices.
-
Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Note:
Please note that Alexa can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
OPERATION
In the SmarterHomeTM App Camera’s interface, click “…” in the upper right corner to access the camera’s settings
Press the down arrow to view all the camera functions.
Pan/Tilt
Rotate the camera by sliding your finger on your smartphone’s screen allowing
you to have a greater field of vision. Alternatively, tapping “Direction” will
bring up the directional pad.
Video Flip
If you’ve mounted the camera upside down, open the camera settings and select
“Basic Function Settings Flip Screen” to flip the camera’s feed 180°.
Motion Detection
Smart motion detection will send push notifications to your smartphone when
movement is detected.
Sound Detection
The camera can detect sounds such a crying baby and will send push
notifications to your smartphone. The sensitivity of the audio detection can
be adjusted in the setting menu.
Temperature & Humidity Detection
The camera can detect the temperature and humidity of the environment. These
values can be monitored using the app.
Record
This function allows 24-hour continuous recording using high-capacity microSD
card storage (max. 128GB).
Screenshot
Saves a screenshot of the current video feed to the microSD card.
Day & Night
Never miss a moment, even in complete darkness, with powerful night-vision
technology
FAQ
Q: Why is the monitor not displaying properly?
A: Check whether the network is operating correctly. Ensure the camera is
positioned closely to the router. Ensure you are connecting to a 2.4Ghz
network, and that this is the network you are currently connected to on your
smartphone.
Q: The device is still appearing in SmarterHome™ app after resetting?
A: Resetting device only initializes network configuration of the camera,
but cannot change the configuration in the app. To stop it appearing in the
app, you must also remove the device from the app.
Q: How do I change the camera network to another router?
A: First remove the device from the app, then reset the device manually.
It is now ready to pair using a new network or device.
Q: Why isn’t the camera identifying the microSD card?
A: It is recommended to insert the microSD card while power is off.
Confirm whether the microSD card is normally available and ensure the format
is FAT32. Sometimes the microSD card may not be identified when the internet
connection is not stable.
Q: Why aren’t push notifications appearing on my phone?
A: Confirm that the app has been running on the phone and the relevant
reminder function has been enabled from the settings list. Ensure message
notification and app permissions have been enabled on the smart phone.
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>