MARQUANT 929078 Wall Mount Bracket Instruction Manual

MARQUANT 929078 Wall Mount Bracket

SAFETY INSTRUCTIONS

• Read all the instructions before installation.
• Contact your dealer if you have any questions.
• The product must only be used for its intended purpose and in accordance with these instructions.
• Incorrect installation can result in the risk of personal injury and/or material damage.
• Check that the wall can support the total weight of the bracket and the television.
• At least two persons are needed, or use a mechanical lifting device, to lift and position the equipment.
• Tighten the screws firmly, but do not overtighten.
• The product is only intended for indoor use. Using it outdoors can result in personal injury and/or material damage.

WARNING!

Do not exceed the permitted load (max 65 kg) – risk of serious personal injury and/or material damage.

TECHNICAL DATA

Max load              65 kg
Weight                 2.1 kg
TV size                37-70″

DESCRIPTION

1.| Horizontal bracket|
---|---|---
2.| Vertical bracket
3.| ScrewM5x14| x4| M-A
4.| ScrewM6x14| x4| M-8
 | ScrewM8x 20| x4| M-C
6.| ScrewM6x30| x4| M-0
7.| ScrewM8x30| x4| M-E
8.| Washer| x4|
9.| Spacer| x8| M-G

10. Spacer x4                  M-H
11. 3x 55 x4                  W-A
12. Plug x4                    W-8
13. Washer06 x4 w-c

FIG. 1

ASSEMBLY

MOUNTING ON WOODEN STUDS

1. Mark out the position of the holes.
2. Predrill the holes.
3. Screw on the horizontal bracket. Use screws and washers.

FIG. 2

IMPORTANT

• Fasten the screws in the middle of the studs.
• Make sure to use suitable parts for the installation.
• Check that the wall can support the total weight of the bracket and the television.

MOUNTING ON CONCRETE/BRICK WALL

1. Mark out the position of the holes.
2. Predrill the holes.
3. Put plugs in the predrilled holes.
4. Screw on the horizontal bracket. Use screws and washers.

FIG. 3

IMPORTANT

• Check that the concrete is at least 35 mm thick to accommodate the concrete anchors. Do not drill into mortar joints. Drill into the bricks or concrete blocks, preferably at least 25 mm from the edge.
• Make sure to use suitable parts for the installation.
• Check that the wall can support the total weight of the bracket and the television.

MOUNTING OF VERTICAL BRACKETS
Make sure that the hanger hooks on the vertical brackets are turned up towards the top of the television.

FIG. 4

Mounting without spacers

1. Put the vertical brackets on the back of the television, as close to the middle as possible.
2. Screw the brackets on the television.

FIG. 5

IMPORTANT

Tighten the screws firmly, but do not overtighten.

Mounting with spacers

1. Use suitable screws, washers and spacers for the actual screen model.
2. Put the vertical brackets on the back of the television, as close to the middle as possible.
3. Screw the brackets on the television.

FIG. 6

IMPORTANT

Tighten the screws firmly, but do not overtighten.

MOUNTING OF TELEVISION

Two persons are needed to mount the television.

1. Make sure that the vertical brackets hook into the horizontal bracket.
2. Do not release the television before it is properly hooked on the bracket.
3. Check at least every 3 months that the bracket is correctly mounted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>