LaserPecker LP3 Versatile Electric Roller User Manual
- June 9, 2024
- LASERPECKER
Table of Contents
LaserPecker LP3 Versatile Electric Roller User Manual
Accessories List
-
Versatile electric roller
-
USB-C cable
-
Silicone bands
After-sales service
- We offer global online technical support services for this product. If you encounter any problems during your use, please feel free to contact us and we will respond to you as soon as possible.
- Facebook ：LaserPecker
- Email ：support@laserpecker.com
- Tel.: +86 0755-28913864
Indicator and Interface Instructions
-
Interface and indicator
-
Connection diagram
Ranging Method
-
Ruler ranging
Place an object on the roller, adjust the height of stand, and measure the distance with a ruler to make sure the bottom of the machine is 130mm away from the object’s surface. -
Ranging by focusing dots
Place an object on the roller, adjust the height of the stand till the two focusing dots coincide and become one, then start engraving.
Engraving Mode-Cylinder Mode
his mode is used to versatile electric roller objects. Select [cylinder] mode in APP, set the correct distance 130mm, preview engraving position, set a proper power/depth settings and engraving size, then start engraving.
-
Mode selection
-
Open the Versatile Electric Roller.
-
Select the cylinder mode
Engraving Frictionless Objects
In [cylinder] mode, if the cylindrical object is frictionless, please wrap silicone bands on it.
-
Wrap two silicone bands on both ends of the object
-
They’ll prevent the object from skidding from the roller.
