ET2 Souffle 18 Inch LED Flush Mount Instruction Manual

ET2 Souffle 18 Inch LED Flush Mount

Product Information

Product Specifications:

• Item/Model Number: GENERAL 120V
• Dimensions:
  • A: X1
  • B: X1
  • C: X2
  • D: X3
  • E: X3
  • 5/32-1.26
• Ground Wire (Green Wire)
• Neutral (N)
• Positive (L)

Product Usage Instructions

1. Keep the product out of reach of children.
2. Ensure proper wiring according to the Ground Wire, Neutral, and Positive terminals.
3. Refer to the verified list of tested dimmers for compatibility. The product is compatible only at 120VAC 0-10V/LOW VOLTAGE and can work at 120-277VAC.
4. Visit www.et2online.com/led-dimmer for more information on dimmer compatibility.

Frequently Asked Questions (FAQ):

• Q: What voltage range does the product support?
  A: The product is designed to work at 120VAC and can also operate within the range of 120-277VAC.

• Q: Where can I find a list of tested dimmers for this product?
  A: You can refer to the verified list of tested dimmers provided with the product or visit www.et2online.com/led-dimmer for more information.

Lamping | Ampoule: 1 x LED 30W (Included)

Please consult a qualified electrician before installing

Before Getting Started

• Read the instructions carefully before assembling the product.
• When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain them for future use.
• Keep all hardware parts and packaging out of reach of children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all the required contents for complete assembly.
• Take care when lifting. Assemble the product near where you intend to install it.
• Do not over-tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.

• Caution there is a risk of shock!
  Disconnect from the power source before assembling or cleaning.

• Switch off, unplug and allow the bulb to cool before replacing the bulb or cleaning.

• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.

• Check the product cord to be sure is free torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder can reduce the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
• Clean with a soft cloth and a mild detergent. Do not use abrasive or harsh cleaners.
• Periodically (every 90-180 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause colour to fade.

PARTS

Before getting, started, ensure the package contains the following components:

Installation Instruction

VERIFIED LIST OF TESTED DIMMERS

• Lutron Diva DVCL-153P
• Lutron Diva DVELV-300P
• Lutron Diva Caseta PD-6WCL
• Lutron Maestro MACL-153M
• DEAKO-Smart Dimmer
• DEAKO-Single Dimmer
• LEVITON 6672-L
• LEVITON DSL06

GENERAL COMPATIBILITY

• TRIAC/FORWARD PHASE
• ELV/REVERSE PHASE
• Only at 120VAC
• 0-10V/LOW VOLTAGE
• Work at 120-277VAC

Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT!
If the control is not paired properly with LED fixtures, irreparable damage may occur. If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: www.et2online.com/led-dimmer.

© 2023 ET2 CONTEMPORARY LIGHTING.

References

• ET2 Online

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>