ET2 E23480 Doric 18 inch Tall LED Wall Sconce Instruction Manual

June 17, 2024
ET2

ET2 E23480 Doric 18 inch Tall LED Wall Sconce

Product Information

Specifications

  • Item / Model Number: E23480 Doric 18 LED Wall Sconce
  • LED Integrated 1 x 12W (Included)

Product Usage Instructions

Installation

  1. Identify the components included in the package: A, B, C, D (x2), E (x3), F (x4), G (x2), #8-32×1, #1-8 x 3/4, L40/M5.
  2. Connect the wires following the labeled guide: Positive (L), Neutral (N), Ground Wire (Green Wire).
  3. Securely mount the wall sconce using the provided screws and brackets.

Operation

  1. Once installed, connect the wall sconce to a power source.
  2. Use the designated switch or control panel to turn the light on/off.
  3. Adjust the angle of the light as needed for optimal illumination.

Maintenance
Regularly clean the surface of the wall sconce with a soft, dry cloth to remove dust and dirt. Avoid using harsh chemicals that may damage the finish.

FAQ
General Compatibility

  • Q: Is the E23480 Doric 18 LED Wall Sconce compatible with dimmer switches?
    A: Yes, this wall sconce is compatible with most standard dimmer switches. Ensure that the dimmer is rated for use with LED fixtures.

  • Q: Can I replace the integrated LED bulb in this sconce?
    A: The integrated LED bulb is not replaceable as it is designed to last for a long lifespan. If you encounter any issues with the LED component, contact customer support for assistance.

Lamping: LED Integrated I x 12W (Included)
Please consult a qualified electrician before installing

GENERAL 120V INSTRUCTIONS

Before Getting Started

  • Read the instructions carefully before assembling the product.
  • When you open the package with a sharp tool like a box knife, be careful not to damage the components inside.
  • Carefully remove all packaging materials and retain for future use.
  • Keep all hardware parts and packaging out Of reach of children.
  • Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product. Ensure that you have all the required contents for complete assembly.
  • Take care when lifting. Assemble the product close to where you intend to install it.
  • Do not over-tighten the screws and bolts as this may damage the threads.
  • Do not let children play with this product.

Risk of suffocation! Keep packaging materials away from children.

Lamp Care Instructions

  • Carefully read through the instruction sheet before assembly and using the product.
    Caution there is a risk of shock! Disconnect from the power source before assembling or cleaning.

  • Switch off, unplug, and allow the bulb to cool before replacing the bulb or cleaning.

  • Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire

  • Check the product cord to be sure is free torn or frayed.

Cleaning & Maintenance

  • On polished finishes, often using talc powder can reduce the appearance Of fingerprints and Other smudges.
  • For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, stone polish, & wood polish.
  • Clean with a soft cloth and a mild detergent. DO not use abrasive or harsh cleaners.
  • periodically (every 90-180 days) make sure that the screws are fully tightened.
  • prolonged exposure to heat sources may cause glazing, melting, and scorching, or even cause color to fade.

PARTS

Before getting, started,ensure the package contains the following components:

WIRING DIAGRAM

DIMMER COMPATIBILITY
MUST be installed by an experienced professional CRITICAL KNOWLEDGE of electronic lighting systems required

VERIFIED LIST OF TESTED DIMMERS

  • Lutron Diva DVCL-153P
  • Lutron Diva DVELV-300P
  • Lutron Diva Caseta PD-6WCL
  • Lutron Maestro MACL-153M
  • DEAKO-Smart Dimmer
  • DEAKO-Single Dimmer
  • LEVITON 6672-L
  • LEVITON DSL06

GENERAL COMPATIBILITY

  • TRIAC / FORWARD PHASE
  • ELV/ REVERSE PHASE
  • only at 120VAC

Due to inrush current, wattage should not exceed 150W on a 600W dimmer

IMPORTANT!

  • If the control is not paired properly with LED fixtures, irreparable damage may occur.
  • If the dimmer you are using is not listed here, consult a lighting professional or view our Dimming Compatibility Chart online: www.et20nline.com/led-dimmer

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ET2 User Manuals

Related Manuals