HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks Installation Guide

June 17, 2024
HOOKE ROAD

HOOKE ROAD Logo RearBumper
BXG.8204-S

[1] Contents:

HOOKE ROAD F150 Rear Back Bumper With Lights and Towing
Hooks

Qty Part Name Size(mm) Picture
12 HexBolt M12*35
12 SplitLockWasher D12
24 FlatWasher M12302
12 HexNuts M12

[2] Tools required:

A. 19mm Socket Wrench;
B. 21mm Socket Wrench;
C. 4mm HEX Socket Wrench;

[3] Installation time:

About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8204-S), please scan the QR code.

HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks - QR
CODEhttps://drive.google.com/drive/folders/1qfNCJnFn7f3fRfGXOB6vr9Sa9Ty3FSAx?usp=sharing

[4] Installation instruction:

Step 1:
Before install the new bumper. Remove the factory bumper first.HOOKE ROAD
F150 Rear Back Bumper With Lights and Towing Hooks - Installation instruction
1 Step 2:
To install the connecting brackets. Use the factory bolts. Don’t tighten up those bolts.HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks -
Installation instruction 2 Step 3:
To assemble the wings & the main body. Use the hex bolts (M1235), split lock washer (D12), flat washer (M12302), hex nuts (M12). Repeat the installation in the other side. Tighten up those bolts.HOOKE ROAD F150 Rear
Back Bumper With Lights and Towing Hooks - Installation instruction
3 Step 4:
Lift up the bumper. To install the bumper into your vehicle. Use the hex bolts (M12
35), split lock washer (D12), flat washer (M12302), hex nuts (M12). Repeat the installation in the other side.
(The led lights have been removed in the picture shown, but it isn’t 100% necessary step)![HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks

  • Installation instruction 4](https://manuals.plus/wp-content/uploads/2024/02 /HOOKE-ROAD-F150-Rear-Back-Bumper-With-Lights-and-Towing-Hooks-Installation- instruction-4.png)Notes: Tighten those bolts after adjusting the height of the bumper totally.![HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks

  • Installation instruction 5](https://manuals.plus/wp-content/uploads/2024/02 /HOOKE-ROAD-F150-Rear-Back-Bumper-With-Lights-and-Towing-Hooks-Installation- instruction-5.png)If you have removed the led lights, you need recover them at last.HOOKE ROAD F150 Rear Back Bumper With Lights and Towing Hooks -
Installation instruction 6 Step 5:
    The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!HOOKE ROAD F150 Rear Back Bumper With Lights
and Towing Hooks - Installation instruction 7 Attention:

    1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
    2. Piease feel free to contact your distributor if you have any kind of question about your purchase.

G oogle Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4
With The Hashtag #hookeroad If You’d LikeHOOKE ROAD
Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HOOKE ROAD User Manuals

Related Manuals