AUDIBAX Beta 2BT Professional Active Speaker User Manual

AUDIBAX Beta 2BT Professional Active Speaker

Product Information

Specifications

• Model: Beta 2BT
• Usage: Powered speaker for home entertainment, personal computer, and mini home theater
• Features: Great sound performance
• Connectivity: Remote control, AC power
• Controls: Power, Master volume, Treble, Bass, Input mode, Next/Volume up, Play/Pause, Previous/Volume down, USB port, SD/MMC card slot

Product Usage Instructions

Safety Instructions

Thank you for purchasing our product. Before operation, please read the following safety instructions carefully:

1. Read the instruction manual.
2. Keep these instructions for reference.
3. Follow all warnings and instructions.
4. Avoid exposing the product to rain or moisture to prevent fire or electric shock.
5. Do not remove the cover; refer servicing to qualified personnel.
6. Do not use near water or block ventilation openings.
7. Clean with a dry cloth only.
8. Do not install near heat sources.
9. Protect the power cord from damage.
10. Use only manufacturer-specified accessories.
11. Unplug during lightning storms or prolonged periods of non-use.
12. Refer servicing to qualified personnel if the apparatus is damaged or not operating normally.

Connectivity & Operational Guide

To connect and operate the Beta 2BT powered speaker, follow these steps:

1. Connect the remote control.
2. Plug into an AC power outlet.
3. Use the control panel for Power, Master volume, Treble, Bass, Input mode, Next/Volume up, Play/Pause, Previous/Volume down, USB port, and SD/MMC card slot.
4. Ensure proper ventilation around the speaker and avoid heat sources.

Frequently Asked Questions (FAQ)

• Q: Can I use the Beta 2BT speaker near water?
  A: No, it is advised not to use the speaker near water to prevent the risk of electric shock.

• Q: How should I clean the Beta 2BT speaker?
  A: Clean the speaker with a dry cloth only to avoid any damage.

• Q: What should I do if the product is damaged?
  A: If the product is damaged or not operating normally, refer servicing to qualified service personnel for repair.

Please read the manual before using the product

Troubleshooting

Please check if power is connected, and if the wall outlet is switched on.

• Please switch the system off then on and reconnect to the audio source.
• Please check if the master volume is turned to minimum.
• Please check if the audio input cable is connected correctly.
• Please check if there is signal from audio source.

NOTICE:

• For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.
• Products will be customized for different applications. Pictures and illustrations shown on this manual may be slightly different from actual product. If any difference is found, the actual product prevails.

Important Safety Instruction

WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Thank you for purchasing our product. We try to provide powered speaker products to satisfy the need of our end customers. This product can add to your home entertainment, personal computer, and mini home theater great sound performance. Please read this manual carefully before operation.

• The lightning flash with arrowhead inside the triangle, is intended to alert the user to the presence of un-insulated dangerous voltage within the product´s enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons.
• To prevent the risk of electric shock, do not remove cover (or back). No user -serviceable parts inside. Refer servicing to qualified service personnel only.
• The exclamation point inside the triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product

1. Read this instruction:
2. Keep these instructions.
3. Heed all warnings
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves. or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a  third grounding prong. The wide blade or the third prong are provided for your safety. If theprovided plug does not fit into your outlet. consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long period.
13. Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged. liquid hasbeen spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
This equipment is a Class II or double-insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth

Unpack the Box

Box contents

Specifications

• Power output: RMS 25W × 2
• Signal to noise ratio: ≥ 80 dB(A)
• Distortion: 5 0.5%
• Frequency response: 75 Hz ~ 18 KHz (+ /- 9dB)
• Inputtype: RCA & 3.5MM
• Input sensitivity: PC: 800 mV ‡ 50 mV
• AUX: 800 mV ‡ 50 mV
• Adjustment: Master volume/treble/bass dial, remote control
• Treble unit: Ф13mm silk dome tweeter
• Bass unit: 4 inch (116mm)
• Dimension: 145 mm (W) × 230 mm (H) × 200 mm (D)
• Weight (net/gross): 4.8/5.6KG

Connectivity & Operational Guide

Adjustment

1. POWER
2. Master Volume
3. Treble
4. Bass
5. Input mode
6. Next/Volume up
7. Play/Pause
8. Previous/Volume down
9. USB port
10. SD/MMC card slot

• Play the audio on your connected device and adjust the master volume/bass/treble to a desired level.
• Mode: Press “Input” to switch between BLUETOOTH, USB. TP and aux Bluetooth pairing: Switch the unit in Bluetooth mode, turn on the Bluetooth function on your mobile phone (notebook, tablet etc.), search the device Audibax Beta 2BT and connect it. When pairing is successful,it will pair automatically the next time you turn on the unit.
• EQ: There are 5 types of EQ mode, you can change it among Rock, Pop, Classical, Jazz, and Normal.
• Play via USB port: Insert flash disc into USB port, it will play MP3 files in your disc automatically, use Previous or Next to choose the file you want to play.
• Play via card slot: Insert so or MMC card. it will play p3 files in your card automatically, use Previous or Next to choose the file vou want to play
• Play via aux: Insert the cable plug to L, R jack, and connect the speaker with another device via 3.5mm connecting cable (RCA input will be cut off automatically), it can work with DVD player, CD player, MP3/MP4 player, computer, etc.

Illustrations

1. Tweeter
2. Reflex port
3. Woofer
4. Control panel
5. Audio input
6. Speaker output
7. Power switch
8. Power cord

Remote Control

1. ON/OFF STANDBY
2. MUTE
3. PREVIOUS/BACKWARD
4. VOLUME DOWN
5. VOLUME UP
6. PLAY/PAUSE
7. NEXT/FORWARD
8. MODE
9. EQ
10. PAIR

Connectivity & Operational guide

Connecting the speakers

• Connect the active speaker and passive speaker with the included connecting cable (golden cable to red wire clamp, and silver cable to the black).
• Connect audio sources like PC sound card to active speakers with the included 3.5mm to RCA connector cable.

Connect to A.C. Power Outlet
Please connect the A.C. power plug to the correct A.C. voltage outlet

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>