Luminii LL60X2 HO Wet Tube Double Row Linear LED Strip Instruction Manual
- June 17, 2024
- luminii
Table of Contents
Luminii LL60X2 HO Wet Tube Double Row Linear LED Strip
IMPORTANT INFORMATION
Please read all instructions prior to installation and keep for future reference!
- PRODUCT SHOULD BE INSTALLED BY A QUALIFIED ELECTRICIAN
- ENSURE POWER IS OFF AT FUSE BOX PRIOR TO INSTALLATION TO PREVENT ELECTRICAL SHOCK.
- USE ONLY WITH CLASS 2 POWER UNIT
- SUITABLE FOR DAMP LOCATIONS
- FOR UNDER CABINET OR SHELF MOUNT
- CONFORMS TO UL STD 2108. CERTIFIED TO CSA STD C22.2 NO.250.0.
INSTALLATION INSTRUCTIONS
-
Clean the area thoroughly where the lineLED will be installed. Remove the paper backing from the lineLED and firmly press down making sure there are no air bubbles that can cause surface irregularities. Do not remove the adhesive, removing the adhesive may cause arcing of the lineLED tape.
1.2 If necessary, add a mounting clip every 12” for additional support.
-
Always ensure power to power supply is off! Follow diagrams to connect power feed wires to power supply.
Refer to power supply instructions for wiring line voltage side.
Connect the positive red wire to the RED low voltage wire from power supply. Also, connect the negative black wire to the BLACK low voltage wire from power supply
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
CUSTOMERS SUPPORT
REV0.3
07182023
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>