HOOKE ROAD BXG.8255 Front Bumper Installation Guide

June 17, 2024
HOOKE ROAD

FrontBumper
BXG.8255

[1] Contents:

HOOKE ROAD BXG.8255 Front Bumper '

HOOKE ROAD BXG.8255 Front Bumper - Figure 1

Qty Part Name Size(mm) Picture
6 Hex Bolt M12*30
6 Hex Bolt M12*35
6 Hex Bolt M8*20
4 Button Head Socket Cap Bolts Screws M6*20
8 Button Head Socket Cap Bolts Screws M4*6
12 Split Lock Washer D12
6 Split Lock Washer D8
18 Flat Washer M12302
6 Flat Washer M8161
4 Flat Washer M6121
6 Hex Nuts M12
4 Flange Hex Lock Nuts M8
4 Nylon Insert Lock Nut M6
2 Nylon Round Spacer M6121.3
1 L-Wrench M4

[2] Tools required:

a. Drive Socket Ratchet Wrench;
b. 4mm Hex Bit Socket;
c. 10mm, 13mm, 19mm Wrench;
d. 13mm, 19mm Shallow Socket;

[3] Installation time:

About 2 hours, 2-3 people may be needed. Installation time may differ according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!)
To view the electronic version (BXG.8255), please scan the QR code.

HOOKE ROAD BXG.8255 Front Bumper - QR CODEhttps://drive.google.com/drive/folders/1f5yAItTUzr47aGa7KVctw41ZG5cSWbHp?usp=sharing

[4] Installationinstruction:

Step 1: Remove the factory front bumper and relative accessories. Step 2: To assemble the wings & the main body. Use the hex bolts (M1230), split lock washer (D12), flat washer (M12302). Repeat the installation in the other side. Tighten up those bolts.HOOKE ROAD BXG.8255 Front Bumper - Installation
instruction 2Step 3: To assemble the bull bar & the main body. Use the hex bolts (M820), split lock washer (D8), flat washer (M8161), hex nuts (M8). Tighten up those bolts.HOOKE ROAD
BXG.8255 Front Bumper - Installation instruction 3Step 4: Assemble the license plate bracket (A1, A2, A3) with the M620 button head socket cap bolts screw groups. And then install it into the bumper with the M620 button head socket cap bolts screw groups.HOOKE
ROAD BXG.8255 Front Bumper - Installation instruction 4Step 5: To install the winch power control box bracket. Use the hex bolts (M820), split lock washer (D8), flat washer (M8161). This step isn’t 100% necessary. Depends if you have the winch power control box.HOOKE ROAD BXG.8255 Front Bumper - Installation instruction
5Step 6: Lift up the bumper. Install the bumper into your vehicle with the Hex Bolt (M1235), Split Lock Washer (D12), Flat Washer (M12302), Hex Nut (M12).HOOKE ROAD BXG.8255 Front Bumper -
Installation instruction 6 Notes. Tighten up the bolts on both sides after adjusting the height of the bumper. Leave a proper distance between the bumper and the car
Step 7: The installation is complete. We hope you enjoy a wonderful off-road life with this quality Hooke Road product!

Attention:

  1. The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
  2. Please feel free to contact your distributor if you have any kind of question about your purchase.

Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4
With The Hashtag #hookeroad If You’d Like

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

HOOKE ROAD User Manuals

Related Manuals