HOOKE ROAD BXG.3060-S 2 Doors Running Boards Side Step Bars Foot Pedal Instruction Manual
- June 17, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.3060-S 2 Doors Running Boards Side Step Bars Foot Pedal
Contents
Tools required
- Drive Socket Ratchet Wrench;
- 12mm Deep Socket;
- 3mm & 4mm Hex Bit Socket
Installation time
About 40 minutes, 1-2 people may be needed. Installationtimemaydiffer
according to your mechanical skill level. (PLEASE VERIFY ALL PARTS ARE PRESENT
AND READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION!) To view the
electronic version (BXG.3060-S), please scan the QR code.
Installation instruction
Driver Side Installation
Step 1: Ready to install our side step. Distinguish the MountingBrackets(According to the number).
Note: The mounting bracket “9” is the driver’s, mounting bracket “11” is
the passenger side.
Step 2 : Assemble the mounting bracket with the (M8*20)
ButtonHeadSocketCap Bolts Screws groups. Don’t tighten up those bolts.
Step 3: Lift up the side step into the position. Make sure that mounting
locations are correct. (If the inside hole in your vehicle is not threaded,
you can install by using a U-nut fastener.)
Step 4: Install the (M820) Button Head Socket Cap Bolts Screwsgroups. Don’t
tighten up those bolts. (If your vehicle has an M6 screw hole here, use M6
screws groups.) Then, use the (M820) Hex Bolts, (D8) Split LockWasher, and
(M8202) Flat Washer in inside holes. Adjust the side step position and
tighten up all bolts
Step 5: Repeat the same installation method in the passenger side.
Step 6: Adjust the main body left and right to the comfort table position
.
Step 7: The installation is complete. We hope you enjoy a wonderful off-road
life with this quality Hooke Road product!
Attention
- The product parts in this instruction may differ slightly from the actual product contents but generally do not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of questions about your purchase.
