Tonor TC-2030 USB Microphone Kit Instruction Manual

Tonor TC-2030 USB Microphone Kit

TC-2030 USB Microphone Kit

Thoroughly read the instruction manual before assembly. Retain the instruction manual for future reference.

ACCESSORIES

• 1 x TONOR TC-2030 Microphone
• 1x Pop Filter
• 1 x Manual
• 1 x Stand
• 1 x Shock Mount
• 1 x Desk Mount Clamp
• 1 x Foam Mic Windscreen
• 1 x USB Cable

INSTALLATION

1. Unpack the microphone set and ensure that it includes all parts and accessories.
2. Fix the desk mount clamp on the edge of a desk.
3. Insert the foot base (black) of the adjustable arm stand into the desk mounting clamp and tighten the screw.
4. Screw the shock mount onto the threaded end of the adjustable arm stand.
5. Insert the condenser microphone into the shock mount.
6. Fix the pop filter on the adjustable arm stand to complete the assembly.

SPECIFICATIONS

1. Polar Pattern: Cardioid
2. Sample Rate: 192KHZ/24BIT
3. Frequency Response: 20Hz-20KHZ
4. Sensitivity: -36dB±3dB(OdB=1V/Pa,at 1 Khz)
5. Output Impedance: 2.2K0
6. Max. SPL: 120dB(at 1KHZ<1% THO)
7. S/N Ratio: 94dB
8. Power Supply: 5V
9. USB Cable Length: 2m

COMPUTER SETUP

APPLE macOS

1. Plug the TC-2030 mic into your computer, indicating the mic is receiving power. The computer will automatically recognize the USB device and install a driver.
2. First, select ”TONOR TC-2030 Audio Device” as your audio input, open your “System Preferences”.
3. Next, click “Sound” to display the Sound preference pane.
4. Click the Input tab and select the ”TONOR TC-2030 Audio Device” as the device for sound input.

NOTICE:

• If you want to monitor your voice when using the macOS operating system, please turn on any recording software first (for example, GarageBand), and make sure to click “Monitoring”. Then click the “Record” to begin, otherwise, you can not hear any sound when you speak into the mic.
• If the computer is not able to identify this USB device, please restart your computer and replug the mic into other USB port.

WINDOWS

Please wait for a few seconds when using the first time, since the driver of TONOR TC-2030 microphone need take time to install automatically. There may be no pop-up window or message though. (If plugging the USB plug in a different USB port, the driver will install again).

After installation, you can test the mic by speaking to it. If the mic picks up no sound, please follow the procedure below.

• Right-click the speaker icon at the bottom right of the screen. Click “Sounds”.
• Confirm the loudspeaker is turned on.
  • Click the loudspeaker you are using – “Properties”- “Levels”, drag progress bar to adjust the output volume.
• Select the “Recording” tab, and choose “TONOR TC-2030 Audio Device” as the default device. When you speak to the mic, the bar-type icon will turn green and bounce.
  • If it is still unchanged, please reset your computer and replug the mic into other USB port. If there’s still no “TONOR TC-2030 Audio Device”, please contact TONOR After-sales Team. (support@tonordirect.com)
  • If you want to monitor your recording, click Microphone “Realtek High Definition Audio”: “Properties”- “Listen”- click”Listen to this device”- “Apply”.
  • NOTE: Click “Listen to this device” when you are using any recording software.
• Double-click on the “TONOR TC-2030 Audio Device” icon to open the Microphone Properties window. Then select the Level tab to adjust the microphone loudness level.

IMPORTANT NOTICE

• Selecting software
  • You may have many choices in recording software. Here we recommend Audacity, (available for free online at http://audacity.sourceforge.net/) is a basic and widely used recording software.
  • Note: The microphone must be plugged in first and then turn on the recording software.
• Positioning the microphone
  • No matter how you adjust the angle or position of the mic, make sure the mic capsule is pointing at your month in order to achieve the best pickup effect.
• Protecting your microphone
  • Avoid leaving your microphone in the open air or in areas where temperatures exceed 110° F (43° C) for extended periods. Extremely high humidity should also be avoided.
• Recording Software Settings
  • Make sure you have the correct input/output selected.
  • Notice: log out of AUDACITY (or other recording software) if you find USB microphone is unavailable. Plug in mic firstly, then log in software again.
  • Make sure to click off “listen to this device” in your computer system when you are streaming. Or you will hear dual of yourself just like too much echo.

2-YEAR WARRANTY

TONOR provides 2 years of after-sale service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us via the following two ways: click Ask Seller or TONOR on your order page; or through our Shopify TONORMIC. We will serve you with full sincerity!

• Shopify link: https://www.tonormic.com/
• Email: support@tonordirect.com

Troubleshooting

FAQ

• If the computer can not identify USB devices, please restart the computer and plug the microphone into another USB port.

• If the mic is recognized but no sound comes out:

  • APPLE macOS System
    Please check whether “System Sound” is mute and whether you have turned the volume control on the microphone to a minimum.

  • Windows System
    Please go to settings>privacy>microphone and click the Allow apps to access the microphone to ON then restart.

• If buzz or electric sound is found:

  • Unplug it, and then plug in again. Make sure all interfaces are plugged tightly;
  • Restart your computer, or insert the microphone into another USB jack;
  • Record an audio sample to check if it is caused by the surrounding environment or the interference of electronic devices;
  • Keep the microphone away from mobile phones and iPad, and don’t place these electronic devices around it;
  • The microphone volume should not be too high. It is recommended to set the microphone volume at 50-80%;
  • Use recording software to realize noise reduction.

Frequently Asked Questions

What recording software is recommended for use with the Tonor TC-2030 USB Microphone?

Audacity is a basic and widely used recording software that is recommended for use with the Tonor TC-2030 USB Microphone.

How do I troubleshoot common issues with the Tonor TC-2030 USB Microphone?

If you encounter issues like the computer not recognizing the USB device or no sound output, try restarting the computer, replugging the microphone into another USB port, or adjusting settings as described in the manual. If issues persist, contact Tonor's After-sales Team for assistance.

What is the warranty coverage for the Tonor TC-2030 USB Microphone?

Tonor provides a 2-year warranty for the TC-2030 USB Microphone. They offer free replacement for products that are not damaged due to accident, alteration, misuse, negligence, or abuse. Contact Tonor's After-sales Team for warranty inquiries or replacements.

Can I use the Tonor TC-2030 USB Microphone with my PS4 or PS5?

Yes, the Tonor TC-2030 USB Microphone is compatible with PS4 and PS5 consoles, allowing you to use it for gaming, streaming, and recording purposes.

Does the Tonor TC-2030 USB Microphone require any additional drivers to be installed?

No, the Tonor TC-2030 USB Microphone features plug-and-play functionality, so you do not need to install any additional drivers. Simply plug it into your computer or gaming console, and it will be ready to use.

How do I mute the Tonor TC-2030 USB Microphone during a live stream or recording?

You can mute the Tonor TC-2030 USB Microphone with a single tap on the top of the microphone. This one-tap mute feature allows for quick and easy muting without creating any additional sounds.

Can I adjust the volume of the Tonor TC-2030 USB Microphone directly on the microphone itself?

Yes, the Tonor TC-2030 USB Microphone features a gain knob that allows you to adjust the microphone's volume directly on the microphone itself. This makes it convenient to fine-tune the volume without needing to access computer settings.

Is the Tonor TC-2030 USB Microphone compatible with Xbox consoles?

No, the Tonor TC-2030 USB Microphone is not compatible with Xbox consoles. It is designed for use with desktops, laptops, PS4, PS5, macOS, and Windows operating systems.

How long is the warranty period for the Tonor TC-2030 USB Microphone?

Tonor provides a 2-year warranty for the TC-2030 USB Microphone. This warranty covers free replacement for products that are not damaged due to accident, alteration, misuse, negligence, or abuse. Contact Tonor's After-sales Team for warranty inquiries or replacements.

Can I use the Tonor TC-2030 USB Microphone with recording software other than Audacity?

Yes, you can use the Tonor TC-2030 USB Microphone with a variety of recording software options. While Audacity is recommended for its basic functionality and widespread use, you can also use other software such as Adobe Audition, GarageBand, or OBS Studio, depending on your preferences and needs.

What is the purpose of the pop filter included with the Tonor TC-2030 USB Microphone?

The pop filter helps to reduce or eliminate popping sounds caused by plosive consonants (such as p and b sounds) and excessive air pressure when speaking or singing into the microphone. It improves the clarity and quality of your recordings by minimizing unwanted noise.

Can I adjust the position of the Tonor TC-2030 USB Microphone after assembly?

Yes, you can adjust the position of the microphone by adjusting the flexible arm stand and the shock mount. This allows you to position the microphone at the desired angle and distance for optimal sound capture during use.

Download The PDF link:Tonor TC-2030 USB Microphone Kit Instruction Manual

Reference:Tonor TC-2030 USB Microphone Kit Instruction Manual- device.report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>