TONOR TW310 UHF Wireless Microphone Instruction Manual

TONOR TW310 UHF Wireless Microphone

Product Information

The TONOR UHF Wireless Microphone is a high-quality microphone designed for optimal user experience. It incorporates TONOR’s knowledge and passion for audio technology to provide high-performance sound. The microphone is easy to use and offers excellent sound quality.

Package Includes

• TW310 (Transmitter)

• TW320 (Receiver)

Operating Environments & Notes

When using this device:

• Keep it away from water.
• Use it in a ventilated environment and keep it away from fire.
• Keep it away from other interfering sources as it is a wireless device.
• Do not take apart the device.
• Use the standard power supply, as high voltage may damage the device.
• Place used batteries into the recycle bin and do not litter them.
• When using this device, keep it away from water.
• Use the device in ventilated environment, keep it away from fire.
• Since it’s a wireless device, please keep it away from other interfering sources.
• Don’t take apart the device.
• Please use the standard power supply, high voltage may damage the device.
• Please place the used batteries into the recycle bin, don’t litter them.

Specifications

• Frequency Response: 40Hz-18Khz
• Operating Frequency (US): 902.8-926.8MHz
• Operating Frequency (UK/EU): 823-831MHz
• Frequency Stability: ±10ppm
• SNR: ≥90dB
• Sound Distortion: ≤0.5%
• Mic Input Sensitivity: -52dB±3dB(0dB=1v/μ bar at 1KHz)
• RF Sensitivity: -95dBm
• Operating Temperature: 0˚C to +55˚C

MICROPHONE OPERATION INSTRUCTION

The microphone operation instructions are as follows:

As shown in above pictures:

1. Display Screen
2. On/Off Switch
3. Tail Tube
4. Volume +
5. Setting Button
6. Volume
7. Battery Compartment

*Install 2AA batteries before using the wireless microphone and installing instruction is as follows:**

1. Take down the tail tube of mic.
2. Install the batteries and tighten tail tube of mic.

Note: The positive and negative polarity of battery cannot be reversed.

Instruction:

• Press button 2 to turn on. Press it for 2s to turn off.
• Press the button 5, then the frequency on the screen will be changed.
• Press button 4 or 6 to adjust volume.

Microphone Usage Instructions:

1. Take down the tail tube of the microphone.
2. Install 2*AA batteries in the battery compartment of the microphone.
3. Tighten the tail tube of the microphone.
4. Ensure that the positive and negative polarity of the battery is correct.
5. To turn on the microphone, press button 2. Press it for 2 seconds to turn off.
6. To change the frequency on the screen, press button 5.
7. Adjust the volume using button 4 or 6.

Receiver Instruction for TW310 and TW320:

Receiver battery, inside the receiver.

1. POWER BUTTON
2. BATTERY INDICATOR
3. USB-C CHARGING PORT
4. SIGNAL INDICATOR

LIGHT INSTRUCTION

Receiver Signal Light Instruction:

• If the signal light turns off, the receiver is not connected to the microphone.
• If the signal light stays on red, the receiver and microphone A are successfully connected.
• If the signal light stays on green, the receiver and microphone B are successfully connected.

Battery Indicator Light Instruction:

• If the battery indicator shows red and green lights, it indicates power on and charging (not recommended).
• If the battery indicator stays on red, it indicates power off and charging. The red light turns off when fully charged.
• If the battery indicator stays on green, it indicates power on and the receiver is fully charged.
• If the battery indicator turns off, it indicates that the receiver is powered off.

Troubleshooting

• No sound for TW310 (The batteries of the microphone have already been installed, but the signal light still turns off.)

Wireless Microphone ID Pairing Steps:

1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into the microphone’s battery compartment.
3. Turn on the microphone and press the setting button 5 until the microphone screen flashes quickly, then release the setting button.
4. Turn on the receiver’s power button and waiting for red signal light flashing 4 times, then press the setting button 5 (on the microphone) once. The microphone screen becomes steady and no longer flashes, the signal light on the receiver turns steady, indicating that the pairing is successful.
5. Tighten the microphone tail tube. Pairing is now completed.
   • No sound for TW320 (The batteries of microphone have already been installed, but one of the microphone has on sound.)

Wireless Microphone ID Pairing Steps:

1. Make sure that the receiver and microphone are turned OFF.
2. Unscrew the microphone tail tube and install the batteries into the mic’s battery compartment.
3. Turn on the microphone, and press setting button 5 (on the microphone), until the microphone screen flashes quickly, then release setting buttons.
4. Turn on the receiver’s power button, waiting for signal light flashing 4 times( red light for A mic and green light for B mic), then press the setting button 5 (on the microphone) once. The microphone screen becomes steady and no longer flashes, the signal light on the receiver turns steady, indicating that the pairing is successful.
5. Tighten the microphone tail tube.
6. Pairing is now completed for one mic, then repeat 2-5 steps for another mic pairing.
   • Received signal with noise or interference
   • Change to other channels;
   • Check if receiving distance exceeds the maximum range.
   • Microphone cannot be turned on
   • Check if batteries are installed reversely;
   • Change to new batteries.

Thank you for purchasing TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorporated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience.
Enjoy your microphone!
TONOR Team

WARRANTY

TONOR provides 2 years of after-sales service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us through our Shopify TONORMIC. We will serve you with full sincerity!

FCC STATEMENT: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

EASTWEST ELECTRONIC COMMERCE CO., LIMITED | LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HONG KONG
Website: https://www.tonormic.com
Email: support@tonormic.com

References

• Professional USB Microphone and Wireless Microphone – TONOR

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>