TONOR TW3A Wireless Microphone Instruction Manual

June 10, 2024
TONOR

TONOR TW3A Wireless Microphone

ABOUT THIS MANUAL

Thank you for purchasing TONOR wireless microphone. This manual is intended to help you understand all about this microphone and how to use it. TONOR always strives for the ultimate user experience. All our knowledge and passion for audio technology are incorpo-rated into building microphones with high performance for you. The TONOR microphone is high quality and easy to use to achieve the best user experience.
Enjoy your microphone!
TONOR Team

Package Including

TW3A

OPERATING ENVIRONMENTS & NOTES

  • When using this device, keep it away from water.
  • Use the device in ventilated environment, keep it away from fire.
  • Since it’s a wireless device, please keep it away from other interfering sources.
  • Don’t take apart the device.
  • Please use the standard power supply, high voltage may damage the device.
  • Please place the used batteries into the recycle bin, don’t litter them.

SPECIFICATIONS

  • Frequency Response : 40Hz-18Khz
  • Operating Frequency: A/902.8 MHz – 914 MHz A: 902.8 MHz 903.6 MHz 904.4 MHz 905.2 MHz 906.0 MHz 906.8 MHz 907.6 MHz  908.4 MHz 909.2 MHz 910.0 MHz 910.8 MHz 911.6 MHz 912.4 MHz 913.2 MHz 914 MHz
  • Operating Range : Up to 60m
  • Frequency Stability : ±10ppm
  • SNR : ≥90dB
  • Sound Distortion : ≤0.5%
  • Mic Input Sensitivity : -52dB±3dB(0dB=1v/μ bar at 1KHz)
  • RF Sensitivity : -95dBm
  • Operating Temperature : 0˚C to +55˚C

MICROPHONE OPERATION INSTRUCTION

As shown in above pictures:

  1. Display Screen
  2. On/Off Switch
  3. Tail Tube
  4. Volume +
  5. Setting Button
  6. Volume –
  7. Battery Compartment

Install 2*AA batteries before using the wireless microphone and installing instruction is as follows:

  1. Take down the tail tube of mic.
  2. Install the batteries and tighten tail tube of mic.

Note : The positive and negative polarity of battery cannot be reversed.

Instruction:

  • Press button 2 for 2s to turn it on/off.
  • Press the button 5, then the frequency on the screen wilI be changed.
  • Press button 4 or 6 to adjust volume.

WARRANTY

TONOR provides 2 years of after-sales service, free replacement to products that are NOT damaged resulting from accident, alteration, misuse, negligence, or abuse. If exceeding 30 days of Amazon return policy, you can still contact us through our Shopify TONORMIC. We will serve you with full sincerity!

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

EASTWEST ELECTRONIC COMMERCE CO., LIMITED | LEVEL 54 HOPEWELL CENTRE 183 QUEEN’S ROAD EAST HONG KONG
EASTWEST ELECTRONIC COMMERCE CO US LIMITED | 3500 SOUTH DUPONT HIGHWAY, SUITE G106 DOVER, DE 19901 UNITED STATES
LIFEWIT LIMITED | FLAT 237, 233 HIGH STREET CROYDON SURREY ENGLAND CR0 1FY UNITED KINGDOM Lifewit GmbH | Friedenstraße 5 97072 Wuerzburg Germany
https://www.tonormic.com support@tonormic.com

FCC Warning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference e to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device.
The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).
This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance.

  • This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.
  • This equipment should be installed and operated with minimum distance 0cm between the radiator & your body.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals