SUNRICHER SR-CS9032A-PIR-V Fixture Integrated Sensor Instruction Manual

SUNRICHER SR-CS9032A-PIR-V Fixture Integrated Sensor

Specifications

Product Description

The Casambi Wireless Fixture Mounted PIR Sensor + Light Sensor + 0-10V Dimming IC is a versatile lighting control device that combines motion detection, light sensing, and dimming capabilities in a single unit.

Product Data

• Input Voltage: 12-24 VDC
• Current Consumption: < 30mA (when dimming method = sink)
• Dimming Control: Analog (0-10V)
• Dimming Output: 4mA (sink) / 20mA (source)
• Status Indicators: Red (motion detection)
• Wireless Communication: 2.4GHz ISM band
• Radio Range: 164 feet (50m) in open field
• Radio Certification: FCC/IC, CE
• Safety Certification: cULus Listed, CE

Physical Information

• Dimensions / Weight: See Dimensions / 12.3g (without locknut) / 21.3g (with locknut)
• Mounting: 1/2 trade size knockout (22.2-22.3mm)
• Material / Color: ABS / White
• Connectors / Wire Gauge: 3 pin connectors / 24-18 AWG (0.2-0.75 mm2)
• Strip Length: 0.28-0.35 in. / 7-9 mm

Environment

• Operating Temperature Range: 32 to 104°F / 0 to 40°C (indoor use only)
• Operating Humidity: 0-95% (non-condensing)

Lighting Control Features

• Sensing: Occupancy Sensing Type Lux Detection Range
• Mounting Height: Recommended height: 8ft (2.5m)
• Detection Angle: PIR sensor 0-1000 Lux

Product Usage Instructions

Installation

1. Ensure power is turned off before installation.
2. Mount the sensor securely in the desired location using the provided mounting hardware.
3. Connect the wires according to the wiring diagram provided in the manual.
4. Tighten all connections and ensure they are secure.
5. Turn on power and test the sensor to ensure proper functionality.

Configuration

1. Download and install the Casambi app on your mobile device.
2. Follow the app’s instructions to set up and configure the sensor within your lighting network.
3. Create scenes, schedules, and automation rules as needed for your specific requirements.

Frequently Asked Questions (FAQ)

1. Q: What is the range of the motion detection sensor?
   A: The motion detection sensor has a coverage range of up to 5m with different sensitivity levels for slow and quick movements.

2. Q: Can the sensor be used in damp locations?
   A: Yes, the sensor is rated for use in damp locations, but not in direct exposure to water.

3. Q: How can I address individual lights using the sensor?
   A: You can address individual lights by assigning them to specific groups within the Casambi app and creating scenes or rules for each group based on sensor input.

Casambi Wireless Fixture Mounted PIR Sensor + Light Sensor + 0-10V Dimming

Important : Read All Instructions Prior to Installation

Function introduction

Product Description

The fixture-Integrated sensor combines presence sensing, daylight harvesting, 0-10V dimming and Casambi radio technology into a small package that fits into various luminaires. When used with 0-10V dim-to-off LED drivers, it enables any lighting manufacturer to deliver wirelessly-controllable and sensor- equipped fixtures with minimal engineering effort. The sensor-equipped luminaires just need to be connected to mains power. The result is increased occupant comfort and significant energy savings that meet the most demanding building energy codes.
Casambi Technology Explained
The Casambi technology provides a mesh network where all the intelligence of the system is replicated in every node and, in such a way, creates a system with no single point of failure. In this kind of fully distributed architecture, any unit can go offline and catch up from others when they return back online.

Wireless Features

• Control a large number of fixtures from any point
• Simple to use UI
• Wide range of functionality – Grouping Luminaires, different lighting situations for different occasions, colour temperature, daylight sensor, occupancy sensor and much more.

Product Data Physical Information

Dimensions / Weight| See Dimensions / 12.3g (without locknut) / 21.3g (with locknut)
---|---
Mounting (Luminaire Hole)| 1/2″ trade size knockout (22.2-22.3mm)
Material / Color| ABS / White
---|---
Connectors / Wire Gauge| 3 pin connectors / 24-18 AWG (0.2-0.75 mm2)
Strip Length| 0.28-0.35 in. / 7-9 mm

Electrical Information

Wireless Communication

Lighting Control

Features|

• Continuous dimming , Individual/group addressing, Scene control, Task tuning (0-100%)
• Autonomous sensor-based control, Scheduler control

---|---

Sensing

Environment

Key Features

• PIR motion detection
• Daylight harvesting
• Works with 0-10V dim-to-off LED drivers
• Autonomous sensor-based control
• Fixture mount installation
• Can be use for indoor applications

Benefits

• Cost-effective solution for energy savings
• Energy code compliance
• Robust mesh network

Applications

• Residences
• Offices
• Meeting rooms
•  Corridors

Detection Pattern

Coverage Side View

Coverage Top View

The detection area for movement sensor can be roughly divided into two parts:

• Slow movement (person moving < 1.0’/s or 0.3m/s)
• Quick movement (person moving > 1.3’/s or 0.4m/s)

Wiring Diagram

Wire Code

• Brown: 12/24VDC Power V+
• Pink: 12/24VDC Power GND & 0-10 Dim-
• Violet: 0-10V Dim+

Product Dimension

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>