U-BOAT Chimera Smartwatch User Guide
- June 9, 2024
- U-BOAT
Table of Contents
U-BOAT Chimera Smartwatch
Dear Customer
- WE CONGRATULATE YOU ON THE PURCHASE OF THIS U-BOAT WATCH.
- IN THIS BOOKLET YOU WILL FIND THE USER INSTRUCTIONS.
- WE KINDLY INVITE YOU TO REGISTER YOUR WATCH ON OUR OFFICIAL WEB SITE IN THE U-CLUB AREA, DEDICATED EXCLUSIVELY TO THE U-BOAT WATCHES OWNERS, SO TO GET ACCESS TO FURTHER BENEFITS AND PREVIEWS ON OUR LATEST NEWS, EVENTS AND OFFERS.
WATCH FUNCTIONS
- A. CROWN COVER
- B. CHRONOGRAPH RESET PUSHER
- C. 24 HOURS INDICATOR
- D. CHRONOGRAPH HOUR COUNTER
- E. CHRONOGRAPH SECONDS COUNTER
- F. CROWN
- G. HOUR HAND
- H. MINUTE HAND
- I. CHRONOGRAPH MINUTE COUNTER
- J. CHRONOGRAPH START/STOP PUSHER
- K. SECONDS HAND
- L. CROWN EXTRACTION PUSHER
- M. DATE
USER INSTRUCTIONS
-
Unscrew the crown cover A to access the crown F .
-
POSITION 1
NEUTRAL POSITION to wind up and start the watch, turn the crown F clockwise. -
POSITION 2
FIRST CLICK press the pusher N to bring the crown F to position 2. Turn the crown F clockwise to set the desired date O . -
POSITION 3
SECOND CLICK press the pusher N again to bring the crown F to position 3.
Turn the crown F clockwise to set the desired time. Consider the indicator C (24 hours) for the correct click of the date O .
-
-
Press the crown F all the way down to return it to position 1. Carefully screw down the crown cover A until it locks completely
CAUTION IMPORTANT
To avoid misalignment or breakage of the date click wheel when setting the date, make sure that:
- When resetting the date O manually, the hand G is not positioned between 21 and 03 o’clock (refer to the 24 hours indicator C if necessary).
- The day O indicated by the date window is aligned with the window (see figure alongside).
- Bring the crown F to position 3, position the watch hand G at 3 o’clock, bring the crown F to position 2, move the date O to the desired day paying attention to point 2.
CHRONOGRAPH FUNCTIONS
- Press the (on/off) pusher L to start the chronograph hand and the hours/minutes totalizer.
- Press the pusher L again to stop the chronograph, which will restart by pressing it again.
- After measuring the times, with the chronograph stopped, press the pusher B to reset the chronograph and totalizer hands to zero.
CARE AND MAINTENANCE
- Your watch will keep its performance intact for a long time, with proper care.
- We recommend that you have your watch checked every 3-4 years at one of our Authorized Dealers/Authorised Service Centres, to carry out ordinary maintenance on all mechanical parts and water resistance.
- We also recommend contacting an Authorized Dealer/Authorised Service Center to replace the strap.
- Do not leave the watch in places exposed to extreme temperature changes, humidity, the sun and strong magnetic fields.
- Make sure the watch is suitable for use in water.
- Always rinse the watch with fresh water after contact with salt water.
AUTOMATIC WATCHES REQUIRE MANUAL WINDING FOLLOWING A LONG PERIOD OF INACTIVITY.
ABOUT COMPANY
- Via Pesciatina 751H
- Gragnano, Capannori
- 55010 Lucca – Italy
- Tel: +39 0583 469288
- Fax: +39 0583 462249
- www.uboatwatch.com
- service@u-boatwatch.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>