BLOSSOM V8028 20 01 Positano Floating Bathroom Vanity Instructions

BLOSSOM V8028 20 01 Positano Floating Bathroom Vanity

Specifications

• Model Numbers: V8028 20 01, V8028 24 01, V8028 30 01, V8028 36 01, V8028 48 01S, V8028 48 01D, V8028 60 01
• Colors/Finishes: Matte White (01), Light Grey (15), Night Blue (26), Aventurine Green (27)
• Features:
  • Furniture grade water protected with several coats of polyurethane
  • Full extension soft-close drawers
• Package Dimensions:
  • V8028 20 01: 21-1/4” X 19-5/8” X 19-5/8”
  • V8028 24 01: 25-1/4” X 19-5/8” X 19-5/8”
  • V8028 30 01: 31-1/2” X 19-5/8” X 19-5/8”
  • V8028 36 01: 37” X 19-5/8” X 19-5/8”
  • V8028 48 01S: 48-7/8” X 19-5/8” X 19-5/8”
  • V8028 48 01D: 48-7/8” X 19-5/8” X 19-5/8”
  • V8028 60 01: 62-1/4” X 24” X 19-5/8”
• Gross Weight:
  • V8028 20 01: 35.94LBS
  • V8028 24 01: 43.87LBS
  • V8028 30 01: 83.78LBS
  • V8028 36 01: 86.6LBS
  • V8028 48 01S: 39.02LBS
  • V8028 48 01D: 49.16LBS
  • V8028 60 01: 67.68LBS
• Sink Top Options:
  • Ceramic basin: C04, A10
  • Artificial stone basin: A10, A22

Product Usage Instructions

• Wall Preparation
  The suggested height without the sink is 33-1/2″ (850mm) to 35-1/4″ (895mm). If an alternate height is desired, adjust the  rough-in and backing material heights using the dimensionsprovided.

• Cabinet Positioning and Installation
  The suggested height of vanity installation is determined by the sink type. For Ceramic Basin, it is the height of the ceramic  basin. For Artificial Stone Basin, it is the height of theartificial stone basin.

• Leveling Bracket Installation
  Install the leveling bracket after determining the height of the vanity. The leveling bracket installation height is 1-1/2″ (40mm) above the sink for both Ceramic Basin and Artificial Stone Basin.

• Hang the Cabinet on the Leveling Bracket and Adjust It Horizontally
  Place the vanity on the leveling bracket. The leveling brackets are only for leveling the vanity and are not designed for permanent support. The vanity needs to be secured into the wood reinforcement board through the corner metal brackets.

• Fixed Cabinet
  Install the Lag Bolt after determining the height, left, and right position, then fix the vanity.

• Install Sink Top
  Follow the instructions provided with the specific sink top to install it onto the vanity cabinet.

• Finish
  Complete any remaining installation steps according to the specific instructions provided.

FAQ

What are the available colors/finishes for this product?
The available colors/finishes are Matte White (01), Light Grey (15), Night Blue (26), and Aventurine Green (27).

What is the weight of each model?
The weight of each model is as follows:

• V8028 20 01: 35.94LBS
• V8028 24 01: 43.87LBS
• V8028 30 01: 83.78LBS
• V8028 36 01: 86.6LBS
• V8028 48 01S: 39.02LBS
• V8028 48 01D: 49.16LBS
• V8028 60 01: 67.68LBS

How do I install the sink top onto the vanity cabinet?
Follow the instructions provided with the specific sink top to install it onto the vanity cabinet.

ACCESORIES

Features

• Furniture grade water resistance plywood, protected with several Coats of polyurethane.
• Drawers front with fluted design. 45 degree integrated door pull with
• UNIHOPPER full extension soft-close hardware.

Package Dimension

• 20″ 21-1/4 ” x 19-5/8″ x 19-5/8″
• 24″ 25-1/4 ” x 19-5/8″ x 19-5/8″
• 30″ 31-1/2″ x 19-5/8″ x 19-5/8″
• 36″ x 19-5/8″ 24″ x 19-5/8″
• 48″  37″ x 19-5/8″ x 19-5/8
• 60″ 62-1/4 48-7/8″ x 19-5/8″

Colors / Finishes

• Matte White – 01
• Light Grey – 15
• Night Blue – 26
• Aventurine Green – 27

Gross Weight

• 20″ 35.94LBS
• 30″ 43.87LBS
• 48″S 83.78LBS
• 60″ 86.6LBS
• 24″39.02LBS
• 36″ 49.16LBS
• 39.02LBS
• 49.16LBS
• 48″D 67.68LBS

Sink Top Options

Side View

Side View

Side View

PARTS

Wall Preparation

The suggested heights without the sink are 30-5/8″ for Blossom Resin Basin, or 32-5/8″ for Blossom Ceramic Basin. Depending on the sinks selected, the total height will vary from 33-1/2″ (850mm) to 35-1/4″ (895mm). If an alternate height desired, adjust the rough-in and backing material heights using the dimensions provided.

• STEP 1. Cabinet positioning and installation
  The suggestion height of vanity installation is 30-5/8″ (780mm) for Resin Basin or 32-5/8″ (830mm) for Ceramic Basin – not including the basin.
  The height of Leveling Bracket Installation is 26″ (660mm) for Resin Basin or 28-1/8″ (715mm) for Ceramic Basin.

• STEP 2. Leveling bracket installation
  Install leveling bracket after determining the height Of vanity.

• STEP 3. Hang the cabinet on the leveling bracket and adjust it horizontally
  Place vanity on leveling bracket, Leveling brackets are only to level the vanity. They are not designed for permanent support. Vanity needs to be secured into the wood reinforcement board through the corner metal L – bracket.

• STEP 4. Fixed Cabinet
  Install Lag Bolt after determined the height, left & right position then fix the Vanity.

• STEP 5.
  Install sink top with Silicone

• STEP 6.
  Fill the side against the wall with Silicone and finish

Unihopper general drawer/hinge adjustment and removal

**Unihopper Quick Assembly Drawer Slide

**

BLOSSOME luxury made simple

Features

• Fumiture grade water proof plywood, protected with several Coats of polyurethane.
• Drawers front with vertical lines.
• 45 degree handle with Unihopper hinge.
• 1 pc wood shelf and 2 pcs removeable glass
• shelves
• Side cabinet could be reversible installed

Package Dimension

• 12″ 14-1/8″ x 11-4/5″ x 50″

Colors I Finishes

• Matte White – 01
• Light Grey – 15
• Night Blue – 26
• Aventurine Green – 27

Gross Weight

• 12″ 4564LBS

Side View

PARTS

Wall Preparation
The typical dimensbns shown will result cabinet height of 62-3/4″ (1543mm – solid surface basin) or – ceramic basin). on the sinks selected, the bytal heOht will vary from 62-3/4″ (1543mm) to If an alternate height is desired, adjust the rough-in and backing material heights using the dimensions.

• STEP 1. Cabinet positioning and installation
  The suggestion height of vanity installation is 62-3/4• (1543mm – solid surface basin) or – ceramic basin).
  The height of Leveling Bracket InstallatOn is 59-3/8″ (IS08mm – Wlid sudace basin) or – ceramic basin)

• STEP 2. Leveling bracket installation Install bracket after determining the height of vanity.

• STEP 3. Hang the cabinet on the leveling bracket and adjust it horizontall:
  Place vanity on bracket, Leveling brackets are only to level the vanity. They are not designed for permanent support Vanity needs to be secured into the wn•od backing material.

Blossom Kitchen & Bath Supply Corporation (718)-366-0088 [email protected] www.BIossomUS.com

For clarification, please contact us at (718)-366-0088 or [email protected] All dimensions are approximate and subject to standard tolerance. Specifications subject to change without prior notice.

References

• Blossom Kitchen & Bath Supply Corporation – Luxury Made Simple

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>