True Fine 170002C Clayton 4 Light Antique Bronze Rustic LED Dry rated Chandelier Instruction Manual
- June 17, 2024
- TRUE FINE
Table of Contents
True Fine 170002C Clayton 4 Light Antique Bronze Rustic LED Dry rated
Chandelier
Product Specifications
- Input voltage: 120V
- Rated power: 60W MAX
- Lamp socket: E26
Product Usage Instructions
Assembly Instruction:
- Screw Stem (B) to Fixture body (A) one by one.
- Screw Canopy (D) to Stem (B).
- Fix Mounting strap (E) to the outlet box with Screw (F).
- Connect the wires according to the provided wiring instructions.
- Pass Canopy (D) through the Screw (G) and fix it with Finial (D).
Wiring Instruction:
- Insert the green grounding screw into the hole with two raised dimples on the mounting bar.
- Follow the color coding and instructions for connecting wires from [GROUP A] and [GROUP B] to house wires.
- Ensure firm connections using wire connectors and check for any exposed wires.
Cleaning:
To clean, wipe the fixture with a soft cloth. Clean glass with a mild soap.
Do not use abrasive materials such as scouring pads or powders, steel wool, or
abrasive paper.
Safety Information:
Always switch off the electricity supply and allow the fixture to cool for
10 minutes before changing light bulbs.
FAQ
-
Q: What should I do if my fixture wire falls into both Group A and Group B?
A: In such cases, prioritize connecting the wire based on the primary group mentioned in the wiring instructions. -
Q: Can I use a higher wattage bulb than the rated power of 60W?
A: It is recommended to adhere to the maximum rated power of 60W to prevent overheating and potential damage to the fixture. -
Q: How can I contact customer service for further assistance?
A: You can reach us via email at service@24h-reply.com for any product-related queries or support.
Instruction Manual
4-Light Chandelier
Overview
Assembly Instruction
- Screw Stem (B) to Fixture body (A) one by one.
- Screw Canopy (D) to Stem (B).
- Fix Mounting strap (E) to the outlet box with Screw (F).
- Connect the wires according to the picture above. (Please refer to the wiring instruction for details )
- Pass Canopy (D) through the Screw (G) and fix it with Finial (D).
Wiring Instruction
-
Insert the green grounding screw into the hole with two raised dimples on the mounting bar. Wrap the ground wire from the fixture (if supplied) around the green grounding screw, then connect it to ground wire from the outlet box (if not fixed on the outlet box) using a wire connector(not supplied). If ground wire from the fixture is not supplied, wrap the ground wire (if not fixed on the outlet box) from the outlet box around the green grounding screw and tighten it.
NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES. -
Take note of the color of the wire(s) on your fixture. Identify which group your fixture wire(s) falls into and connect the wires according to the directions below:
-
Take your fixture wire(s) from [Group A] and place evenly against the black wire from the outlet box. Do NOT twist wires together before using wire connectors.
-
Fit a wire connector over the wires and screw the connector clockwise until you feel firmness.
-
Try gently to pull the connector off the wires. If you can pull the connector off, carefully re-do steps 3 and 4 as above, and check again for a firm connection.
-
Connect the fixture wire from [Group B] to the white wire from the outlet box in the same manner. Make sure no bare wires can be seen outside wire connectors.
Product Specifications
- Input voltage 120V
- Rated power 60W MAX
- Lamp socket E26
Product Packaging
- Fixture body × 1
- Canopy × 1 & Mounting strap × 1
- Screw × 2 & Wire nut × 3
- Stem × 6
- Lamp instruction × 1
Cleaning
To clean, wipe fixture with a soft cloth. Clean glass with a mild soap. Do not use abrasive materials such as scouring pads or powders, steel wool or abrasive paper.
Safety Information
Always switch off the electricity supply and allow to cool for 10 minutes
before changing the light bulbs.