CERTA CTACZK3631A Portable Air Compressor Pump Tyre Inflator User Guide

**CERTA CTACZK3631A Portable Air Compressor Pump Tyre Inflator

**

SAFETY & WARNINGS

Read these instructions carefully before using this product for the first time.
Retain this user guide for future reference.

• This product is suitable for the inflation of small cars tires, motorcycle tire, bicycle tire, balls, swimming rings and other inflatables.

• This product is not suitable for use in large trucks.

• This product is only applicable with 12V sockets. Do not use it with 24V sockets.

• The product and hose can get hot during extended usage.

• To avoid over-inflation and potential injuries, always confirm the required air pressure of the item before inflating.

• Avoid storing this product in high temperature environments.

• Do not bend or step on the hose during inflation.

• Do not leave the product unattended during operation. Always pay attention to avoid over-inflating.

• Do not expose the product to moisture, heavy falls, water immersion and mud or sand ingress.

• This product contains a DC motor which may generate electric sparks during operation.
  Do not place it near flammable liquids or gases during operation.

• Ensure the product is stored between -10°C ~ 45°C.

• Excessive heat or cold will shorten the life of the product and damage the battery.

• This product is not a toy. Do not allow children to play with it.

• Ensure children and pets are supervised and kept at a safe distance during operation.

• Before setting the air pressure value, ensure that you have selected the correct unit of measurement, otherwise it may lead to over-inflation and potential injury.

• Do not dismantle or modify this product in any way.

COMPONENTS

Air nozzle (x2)| Ball adapter| Spare fuse| Presta valve adapter| Inflation hose
---|---|---|---|---
| | | |

OVERVIEW

1. Handle
2. Control panel
3. LED light
4. Air hose
5. Light button
6. Power switch
7. 12V Connector

Control Panel

OPERATION

Inflating Tyres

1. Prepare the Compressor:

   • Connect the portable compressor to a 12V socket source, such as your vehicle’s cigarette lighter.
   • Place the compressor stable surface near the tyre you wish to inflate.

2. Attaching the inflation hose:

   • Attach the inflation hose to the air hose on the compressor.
   • Ensure that the connection is tight and free from leaks.

3. Set the Desired Pressure:

   • Refer to the tyre’s recommended pressure, typically indicated on the tire sidewall or in your vehicle’s manual.
   • Place the power switch in the ON position.
   • The compressor will start running, and you should hear air flowing.
   • Press the unit button “M” to switch the pressure units.
   • Use the increase “+” and decrease “-” buttons to set the desired air pressure.
     Wait for the display to stop flashing.

4. Inflate the Tire:

   • Place the nozzle onto the tyre’s valve stem, ensuring a secure connection.
   • Monitor the digital display as the tire inflates.
   • The compressor will stop automatically once the set pressure is reached.

5. Check the Pressure:

   • Detach the hose from the tyre’s valve stem.
   • Use a separate tire pressure gauge to verify that the tire pressure matches the desired level.
   • Repeat steps 2-6 if necessary

LED Light
For convenient usage during night-time or in poorly lit areas, the compressor is equipped with a built-in LED light.

• To turn the LED light ON, press the light button.
• To turn the LED light OFF, press the light button again.

Accessories

As per your requirement, attach one of the included adapters to the inflation hose:

Allows you to switch a Presta valve to a Schrader valve. Suitable for mountain bikes, electric bikes, motorcycles.
| Narrow inflating adapter:
Suitable for most inflatables, swimming rings, air mattresses.
| Short inflating adapter:
Suitable for balloons.
| Ball adapter:
Suitable for basketballs, footballs and other kinds of balls.

Air Pressure Guide

In order to maintain user safety and avoid over or under inflating items, always check the recommended air pressure of the product.
Below is a guide of recommended air pressure values for common products.

12, 14, 16-inch bicycle tire
20, 22, 24-inch bicycle tires
26, 27.5, 29-inch bicycle tire 700c road bike open tire
700c highway support lower tube tire| 45-50psi 30-50psi 40-50psi 45-65psi 100-130psi 120-145psi
Motorcycle| Motorcycle tire| 26-43psi
Car| Small car tire| 31-40psi
Ball| Basketball Football Volleyball Rugby| 7-9psi 8-16psi 4-5psi 12-14psi

Replacing the Fuse

1. Unscrew the cap on 12V connector.

2. Take out the used fuse and replace it with a new fuse.

3. Replace the cap on the 12V connector.

SPECIFICATIONS

• Input Voltage: DC 12V
• Power: 100W
• Wire Length: 3m
• Cylinder Diameter: 22mm
• MAX Air Pressure: 150PSI

TROUBLESHOOTING

the air hose and adapter, replacing them if necessary.
The LED light won’t turn on| The compressor is not properly connected to the 12V socket| Connect the 12V connector to a 12V socket.

CUSTOMER SUPPORT

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>