Merra HCF-4029-NI-BNHD-1 14 Inch 2 Light Modern Brushed Nickel Vanity Light Instructions
- October 30, 2023
- MERRA
Table of Contents
HCF-4029-NI-BNHD-1 14 Inch 2 Light Modern Brushed Nickel Vanity Light Instructions
HCF-4029-NI-BNHD-1 14 Inch 2 Light Modern Brushed Nickel Vanity Light
WARNING!
Read these instructions carefully prior to installation.
- Check for electric, gas, and plumbing lines before drilling or consult a professional.
- ALWAYS cut ALL relevant power before installing a lighting fixture, and do not restore power to the line until the lamp has been FULLY installed.
- DO NOT use with bulbs exceeding the recommended wattage.
ASSEMBLY
- Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction box (not included).
- Unscrew the canopy nuts (F) and take the mounting bracket (A) off the canopy (E). Connect your mounting bracket to your junction box using the mounting bolts (C).
- Make electrical connections using the wire nuts (D).
- Being careful that no wiring is left exposed, place the canopy against the mounting bracket and secure it by replacing the canopy nuts onto the canopy bolts (B) and retightening them.
- Install the shades (H) onto the lamp holders (G). Secure them with the socket rings (I).
- Install your bulbs into the sockets. This fixture has been rated for two E26 bulbs (not included) up to 60W each.
CONTACT US
Thank you for choosing our products! If you have any questions or comments
contact us at help@cs-supportpro.com and
we’ll resolve your issue ASAP
For a .pdf copy of the latest version of these instructions, use the
appropriate app on your smartphone to scan the QR code to the right.
HCF-4029-NI HCF-4029-BK Rev. 26 Oct. 2021
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>