TITAN Smart Watch Mineral Glass Leather User Guide
- June 6, 2024
- Titan
Table of Contents
Smart Watch Mineral Glass Leather
User Guide
Titan Smartwatch Quick Start Guide
What’s in the Box
Getting started
Turn on the Band:
- Getting started with your Titan Smartwatch is super simple. When the watch is shipped from the factory, it’s charged and in shipment mode.
- To wake up your Watch, all you need to do is to charge it. The watch comes to normal mode & you’re good to go!
App installation
Install the Titan Connected App
· Please download the”TitanConnected” app from the google play store or the
Apple App store
Note: It is recommended to keep the band close to the phone.
Pairing the band
- Open the app and follow the on-screen instructions.
- The app will search for the nearby Watch &display.
- Select Titan_Watch_34w3 and click start pairing.
- The watch will show the pairing pin, enter the sameonApp&youwill find pairing successful.
Features
- Activity Tracker (Steps, Distance &Calories)
- AutoTimeSync
- Second City Timezone
- Compass
- Timer, Stop Watch&Alarm
- Find your phone
- Music control
- Camera control
- Weather
- All Notifications
Product Specifications
Band| Dimension
Case material
Glass material
Strap| 43 X 14.5 mm
Stainless steel / Titanium
Mineral Glass
Leather
---|---|---
Sensors| Connectivity
Sensors
Feedback| BLE 4.2
Accelerometer & Gyro
Vibrator
Battery| Battery type
Battery capacity
Battery life| Li-Polymer — Rechargeable
40mAh
Minimum 3 Days
Water Resistance| Rating| 3ATM
Hazardous / Toxic substances / Elements
Component Name| Lead (Pb)| Mercury (Hg)| Cadmium (Cd)| Hexavalent Chromium
(COW)| Polybrominated
Biphenyls (PBB)| Polybrominated Diphenyl Ethers (PBDE)
---|---|---|---|---|---|---
PCBA Board| X| 0| 0| 0| 0| 0
Outer Casing| 0| 0| 0| 0| 0| 0
Metal| X| 0| 0| 0| 0| 0
Battery| 0| 0| 0| 0| 0| 0
The table was prepared pursuant to the provisions of SJ/T 11364.
0: Indicates that the content of all the hazardous substances in the
homogeneous materials of this part is below the limit requirements specified
by GB/T 26572.
X: Indicates that the content of all the hazardous substances in the
homogeneous material of this part exceeds the limit requirements specified by
GUT 26572. The information provided in this table is based on the data
provided by the suppliers At current technology levels, the use of all
hazardous substances is controlled to the minimum.
The product complies with ROHS requirements for environmental protection.
Currently, there is no mature technology globally to replace or reduce the
lead content in electronic ceramic, optical glass, steel, and copper alloy.
The green lifespan – Environmental protection lifespan of the product is
10 years, and the label is shown in the figure on the left. The green lifespan
for a replaceable part such as the battery may be different from that of the
product. The green lifespan is valid only when using the product under normal
circumstances described in the manual.
Disclaimer: Titan Company Limited has the right to final interpretation
of this manual.
FCC statement
FCC ID: 2AK9F-90120
Caution: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio technician for help.
This equipment can be installed and operated with a minimum distance of 0
millimeters between the radiator and the user’s body. This equipment has been
evaluated to meet general RFexposure requirements at 0 millimeters distance.
CE Statement
Max RF Power level:
BLE (2402-2480MHz)<5dBm
RF exposure information: The Maximum Permissible ExposureLMPE) the level has
been calculated based on a distance of Omm between the device and the human
body. To maintain compliance with RF exposure requirement, use products that
maintains a 0mm distance between the device and the human body.
Hereby, Titan Company Limited declared that the radio equipment type (
SmartWatch – xxxxxx) is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following internet
address: http://www.titanworld.com/in-en/
Titan Company Limited
Integrity, #193, Veerasandra, Electronic City P.O., Off Hosur Main Road
, Bangalore-560100, Karnataka, India
Telephone: +91-(0)80-6704 7000
Fax: +91-(0)80-6704 6262
Email: corpcomm©titan.co.in
Note on the accuracy of the Activity tracker
Activity trackers are intended to be tools to provide you with information to
encourage an active and healthy lifestyle. Activity trackers rely on sensors
that track your movement and other metrics. The data and information provided
by these devices are intended to be a close estimation of your activity and
metrics tracked, but may not be completely accurate, including the step,
sleep, distance, and calorie data. Activity trackers are designed to track
repetitive walking motions as steps. Arm movement while walking will be
captured by the internal accelerometer of the device and will record each
complete swing of the arm as two steps.
Note – Accurate user data (height) information provides better accuracy. Some
activities may cause frequent arm movement resulting in the device recording
too many steps:
- Driving a vehicle (usually due to rough terrain)
- A restless night of sleep
There are also instances where a lack of arm movement may result in a loss of steps while you are walking:
- Pushing a stroller or shopping cart
- Carrying a bag of groceries or a child
- Talking on the phone and walking
Activity trackers are not medical devices, and the data provided by them is not intended to be utilized for medical purposes and is not intended to diagnose, treat, cure, or prevent any disease. We recommend you consult your doctor before engaging in any exercise routine.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>