ERMENRICH Reel GK40 Laser Meter User Manual
- June 17, 2024
- ERMENRICH
Table of Contents
- ERMENRICH Reel GK40 Laser Meter
- Specifications
- Product Usage Instructions
- Display Information
- FAQ
- FEATURES
- The kit includes
- Getting started
- Usage
- Reference point
- Units of measurement
- Mode selection
- Display information
- Single distance measurement
- Continuous measurement
- Area measurement
- Volume measurement
- Calculations with 2 additional measurements (Pythagorean theorem)
- Addition and subtraction
- History records
- Specifications
- Care and maintenance
- Battery safety instructions
- Levenhuk International Warranty
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ERMENRICH Reel GK40 Laser Meter
Specifications
- Model: Ermenrich Reel GK40/GK60/GK80/GK100 Laser Meter
- Power Source: 2 AAA batteries
- Includes: laser meter, lanyard, user manual, warranty
Product Usage Instructions
Getting Started
Open the battery compartment cover and insert 2 AAA batteries according to the
correct polarity. Close the cover.
Usage
Press the POWER ON / MEASURE button to turn the device on. The laser beam
will switch on automatically and then off after 30 seconds. To switch it off
manually, press the CLEAR/OFF button. Aim the laser beam at the target. Press
the POWER ON / MEASURE button to take a measurement. Press the CLEAR/OFF
button for 3 seconds to turn the device off.
Reference Point
The default reference point is the bottom end of the device. Press the
REFERENCE SWITCH button to change the measurement point from the bottom to the
top of the device.
Units of Measurement
Press the FUNCTION button for 3 seconds to change the unit of measurement.
Mode Selection
Press the FUNCTION button to change the measurement mode one by one: Single
distance measurement mode > Area measurement mode> Volume measurement mode >
Calculations with 2 additional measurements (Pythagorean theorem).
Display Information
- Single distance measurement mode
- Calculations with 2 additional measurements (Pythagorean theorem)
- Area measurement mode
- History records
- Volume measurement mode
- Battery status
Single Distance Measurement
In Single-distance measurement mode, aim the laser beam at the target and
press the POWER ON / MEASURE button. The value will be displayed on the
screen.
Continuous Measurement
In Single distance measurement mode, press the POWER ON / MEASURE button for 3
seconds. The device will keep taking measurements one after another. MAX, MIN,
and the last measured values will be displayed on the screen.
Area Measurement
Select the Area measurement mode. Aim the laser beam at the target and
press the POWER ON / MEASURE button to measure 2 sides of the target. The area
will be calculated automatically.
Volume Measurement
Select the Volume measurement mode. Aim the laser at the target and press
the POWER ON / MEASURE button to measure the length, width, and height of the
three-dimensional target. The volume will be calculated automatically.
Calculations with 2 Additional Measurements (Pythagorean Theorem)
Select the Calculations with 2 additional measurements (Pythagorean
theorem) mode. Aim the laser at the target and press the POWER ON / MEASURE
button to measure the lines AB and AC. Line BC will be calculated
automatically.
FAQ
Q: How do I change the reference point?
A: Press the REFERENCE SWITCH button to change the measurement point from
bottom to top.
Q: How do I switch between different units of measurement?
A: Press and hold the FUNCTION button for 3 seconds to change the unit of
measurement.
Q: How can I perform continuous measurements?
A: In Single distance measurement mode, press and hold the POWER ON / MEASURE button for 3 seconds to enable continuous measurements.
FEATURES
- Laser emitter
- Laser emitter
- LCD screen
- POWER ON / MEASURE button
- FUNCTION button
- CLEAR/OFF button
- Bubble level
- +/– / HISTORY RECORDS button
- REFERENCE SWITCH button
- Battery compartment
The kit includes
laser meter, lanyard, user manual, and warranty.
Getting started
Open the battery compartment cover and insert 2 AAA batteries according to the correct polarity. Close the cover.
Usage
- Press (4) to turn the device on. The laser beam will switch on automatically and then off after 30 seconds. To switch it off manually, press (6).
- Aim the laser beam at the target. Press (4) to take a measurement.
- Press (6) for 3 seconds to turn the device off.
Reference point
The default reference point is the bottom end of the device. Press (9) to change the measurement point from the bottom to the top of the device (Fig. A).
Units of measurement
Press (5) for 3 seconds to change the unit of measurement.
Units of measurement options
Mode selection
- Press (5) to change the measurement mode one by one.
- The setting order: Single distance measurement mode > Area measurement mode > Volume measurement mode > Calculations with 2 additional measurements (Pythagorean theorem).
Display information
- Single distance measurement mode
- Area measurement mode
- Volume measurement mode
- Calculations with 2 additional measurements (Pythagorean theorem)
- History records
- Battery status
Single distance measurement
In Single-distance measurement mode, aim the laser beam at the target and press (4). The value will be displayed on the screen.
Continuous measurement
In Single distance measurement mode, press (4) for 3 seconds. The device will keep taking measurements one after another. MAX, MIN, and the last measured values (Fig. B) will be displayed on the screen.
Area measurement
Select the Area measurement mode. Aim the laser beam at the target and press (4) to measure 2 sides of the target. The area will be calculated automatically (Fig. C).
Volume measurement
Select the Volume measurement mode. Aim the laser at the target and press (4) to measure the length, width, and height of the three-dimensional target. The volume will be calculated automatically (Fig. D).
Calculations with 2 additional measurements (Pythagorean theorem)
Select the Calculations with 2 additional measurements (Pythagorean theorem) mode. Aim the laser at the target and press (4) to measure the lines А and В (Fig. E). Line C will be calculated automatically.
Addition and subtraction
Direct the laser beam at the target and then take a measurement. Press (8) to add the next measurement (plus icon appears on the screen). Take the next measurement. To subtract the measurement, press (8) and hold it for 2 seconds (minus icon appears on the screen).
The addition and subtraction functions are available in Single, Area, and Volume measurement modes.
History records
Press (8) for 3 seconds to view the recorded values. Press (6) to delete the recorded values one by one.
Specifications
The manufacturer reserves the right to make changes to the product range and specifications without prior notice
Care and maintenance
Please carefully read the safety instructions and user manual before using this product. Otherwise, it may result in hazardous laser radiation and electric shock. Keep away from children. This is a class I laser product. Please DO NOT look directly into the beam with unprotected eyes or through an optical device at any time and never direct it toward other people. Do not remove any safety labels. Do not aim the device directly at the sun. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Do not use the product in an explosive environment or close to flammable materials. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid the risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.
Levenhuk International Warranty
Levenhuk products, except for their accessories, carry a 5-year warranty against defects in materials and workmanship. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met. For further details, please visit: levenhuk.com/warranty If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.
References
- Доживотна гаранция на Levenhuk – Официален уебсайт на Levenhuk в България
- Doživotní záruka společnosti Levenhuk – Oficiální webové stránky Levenhuk pro Českou republiku
- Levenhuk Lebenslange Garantie – Die offizielle Website von Levenhuk in Deutschland
- Garantía internacional de por vida Levenhuk – Web oficial de Levenhuk en España
- Levenhuk Lifetime Warranty – Levenhuk’s official website in USA
- A Levenhuk élettartamra szóló szavatossága – A Levenhuk hivatalos magyarországi weboldala
- Levenhuk Limited Warranty – Levenhuk’s official website in USA
- Поддержка - Гарантийное обслуживание Левенгук - Levenhuk Russia
- Gwarancja bezterminowa Levenhuk – Oficjalna witryna internetowa Levenhuk w Polsce
- Levenhuk’s official website in USA