i3 343051 Pendant Lamp Instruction Manual
- June 17, 2024
- i3
Table of Contents
i3 343051 Pendant Lamp
Product Information
Specifications:
- Product Name: Pendant Lamp
- Model Number: 343051
- Revision: 07-23
Product Usage Instructions
Step 1: Unboxing and Preparation
- Open the package containing the pendant lamp carefully.
- Remove all the components from the package.
- Ensure that all the required parts are present, including the lampshade, base, screws, and any other accessories mentioned in the manual.
Step 2: Assembling the Pendant Lamp
- Identify the lampshade and the base.
- Attach the base to the lampshade by aligning the corresponding holes.
- Use the special screws provided to secure the base to the lampshade. (Note: It is recommended to use the included special screws for proper installation.)
- Tighten the screws to ensure a secure connection between the base and the lampshade.
Step 3: Mounting and Installation
- Select a suitable location for mounting the pendant lamp.
- Ensure that the mounting surface can support the weight of the pendant lamp.
- If necessary, use a stud finder to locate a ceiling joist oruse appropriate anchors for secure installation.
- Hold the assembled pendant lamp against the mounting surface.
- Mark the positions for screw holes on the mounting surface using a pencil or marker.
- Drill pilot holes at the marked positions to facilitate screw insertion.
- Align the holes on the base of the pendant lamp with the pilot holes on the mounting surface.
- Insert screws through the holes and tighten them to securely mount the pendant lamp.
Step 4: Electrical Connection
- Ensure that the power source is switched off before proceeding with the electrical connection.
- Locate the electrical wires coming from the ceiling or wall.
- Identify the corresponding wires from the pendant lamp.
- Connect the matching wires using wire connectors or by following local electrical codes and regulations.
- Securely tighten the wire connectors to ensure proper electrical connections.
- Tuck the connected wires into the electrical box or canopy.
Step 5: Testing and Final Adjustments
- Switch on the power source.
- If applicable, adjust any built-in dimmer switches or settings according to your preference.
- Ensure that the pendant lamp is hanging straight and level.
- If required, adjust the height of the pendant lamp by following the instructions provided in the manual.
Frequently Asked Questions (FAQ)
-
Q: Can I use different screws for installation?
A: While it is possible to use different screws, we highly recommend using the special screws provided with the pendant lamp for optimal installation and safety. -
Q: How do I clean the pendant lamp?
A: To clean the pendant lamp, gently wipe the lampshade and base with a soft, dry cloth. Avoid using any abrasive materials or harsh chemicals as they may damage the lamp’s finish. -
Q: Can I install the pendant lamp on a sloped ceiling?
A: The pendant lamp is designed for installation on flat ceilings. Installing it on a sloped ceiling may compromise its stability and safety. Please ensure proper installation on a suitable surface.
ATTENTION : We recommend to use included special screws when installing this pendant lamp.