i3 INTERNATIONA TTP111HDL-02 HD Analog/CVBS UTP Balun User Manual
- June 3, 2024
- i3 INTERNATIONA
Table of Contents
i3 INTERNATIONA TTP111HDL-02 HD Analog/CVBS UTP Balun
INTRODUCTION
Thank you for purchasing i3 International’s TTP111HDL-02 UTP passive balun transmitter (sold in pairs). Compatible with analog CVBS and HD analog (TVI/AHD/CVI) signal. Use with i3 HR16/HR16v2 encoder or Veo16p HVR and i3’s line of HD analog cameras to replace coaxial cable with UTP cable for long distances.
INSTALLATION
FEATURES
- Single channel passive video transceiver.
- NTSC/PAL real-time video transmission
- Utilize UTP cable instead of coaxial. Convenient wiring installation, higher cable utilization rate and lower composite wiring cost
- Send CVBS signal up to 1312 ft (400 m) and HD analog signal up to 820 ft (250 m) over UTP cable.
- BNC male to screw terminal with 4 in (10 cm) mini coax cable for easy connection.
- Compact size allows mounting multiple units behind an encoder, DVR, etc.
- Passive, no power required.
- Built-in ESD, EFT (impulse noise) and transient protection.
SPECIFICATION
- Video Input/Output Terminals BNC MALE (75Ω 1V p-p)
- Bandwidth 50Hz ~ 60MHz (-3dB
- Transmission Distance:
- CVBS: 1312 ft (400 m)
- 1080p: 820 ft (250 m)
- 5MP: 650 ft (200 m)
- 4K/8MP: 500 ft (150 m
- ESD Protection 30KV (air); 15KB (contact); IEC 6100-4-2 compliant
- EFT (impulse noise) 40A (5/50ns); IEC 61000-4-4 complaint
- Lightning protection 2A (8/20μs); IEC 61000-4-5 compliant
- Surge protection startup time < 1nS
- Environmental specifications
- Operation: 32-131 °F (0-55 °C);
- Storage: -4-185 °F (-20-85 °C);
- Humidity: ≤ 95%
- Dimensions ⅝”×6.6”×5⅝” (15.5×168×143 mm), includes 100 mm mini coax cable
- Weight 0.7 oz (20 g)
- Certification CE, FCC
REGULATORY NOTICES (FCC CLASS A)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Scan this QR code or visit
ftp.i3international.com for Annexxus
Configuration Tool (ACT) installation and additional documentation.
Contact our Technical Support team at: 1.877.877.7241 or
[email protected] if you have
any questions or concerns regarding camera installation or if you require
software services or support.
ACT Download & Documentation