CLAYMORE V1040 Portable Fan User Manual

CLAYMORE V1040 Portable Fan

Product Information

Specifications:

• Model: V1040
• Power Source: Battery
• Wind Speed Levels: 4 levels (Ultra low, Low, Medium, High)
• Timer Settings: 1 hour, 2 hours, 3 hours, 4 hours
• Remote Control: Yes
• Handle: Yes
• Stand: Yes
• Hook: Yes
• Tripod Connection: Yes
• Charging Method: USB Type-C
• Power Bank Function: Yes

Product Usage Instructions

Fan Power and Wind Speed Control:

To turn on the fan and control the wind speed, follow these steps:

1. Press the speed button to cycle through the wind speed levels (1 – Ultra low, 2 – Low, 3 – Medium, 4 – High).
2. The right indicator light will illuminate when the fan is turned on.
3. To turn off the fan, keep pressing the speed button until it reaches the “OFF” level.

Wind Speed Indicator:

The wind speed indicator shows the current wind speed level. Each press of the wind speed button increments the level by one.

Timer Setting:

To set the timer for automatic shut-off, follow these steps:

1. Start the fan by turning it on using the speed button.
2. Press the timer button to cycle through the available timer options (1 hour, 2 hours, 3 hours, 4 hours).
3. The right indicator light will illuminate when the timer is activated.

Timer Indicator:

The timer indicator shows the currently set timer duration. Each press of the timer button increments the duration by one hour.

Remote Control:

To use the remote control, follow these steps:

• Aim the remote control at the signal receiving window of the main unit.
• When not in use, attach the remote control to the back of the product using the built-in magnet.

Handle, Stand & Hook:

The product comes with a handle for convenient portability. It can be used with or without a tripod. It can also be used upside down by connecting a carabiner.

When adjusting the angle of the handle, take care not to get your fingers caught between the handle and the body.

Safety Cage Separation and Cleaning:

To separate and clean the safety cage, follow these steps:

1. Hold the head of the product and turn the outer side of the front safety cage counterclockwise to separate it.
2. To reattach the safety cage, place it back into the head and turn it clockwise until you hear a click. Ensure that the arrow on the bottom and the slot are aligned for correct mounting.

FAQ

1. Do I need to charge the battery before using the product for the first time?

Yes, it is recommended to fully charge the battery before using the product for the first time or after storing it for an extended period.

Can continuous use for an extended time cause overheating?

Yes, continuous use for an extended time may cause overheating, which can lead to safety accidents and product failure. It is advised to take breaks and not apply physical shocks to the main unit.

Can I use the product in high-temperature environments?

No, it is not recommended to use the product in high-temperature environments such as near-fire or heating appliances.

Caution

1. When using product for the first time or storing for an extended period, please charge the battery fully.

2. Overheating due to continuous use for an extended time may cause safety accidents such as product failure, fire, etc. After 3~4 hours of continuous use, discontinue use to allow product to cool.

3. Do not put objects or fingers into the operating fan. (Be careful of hair getting caught.)

4. Keep out of reach of children. (For children under the age of 10, please use under adult supervision.)

5. Do not disassemble, modify, or repair on your own.

6. Be careful of wet environments (bathroom) and discontinue use if it has water damage.

7. If the temperature rises or the outer appearance deforms during charging, discontinue use and contact a customer center.

8. Do not use it in high temperature environments such as near fire or heating appliances.
   It may cause explosion or ignition.

9. Do not bend beyond the allowed angle adjustment. This may cause damage to the product.

10. Do not use in conditions exceeding the acceptable operating temperature range (-10°C~40°C).

11. Do not store or use in vehicles exposed to direct sunlight. It may cause explosion or malfunction.

12. Do not charge it in contact with easily flammable materials like carpets or blankets.

13. After use, be sure to turn off the power for storage.

14. If the product is dropped or experiences physical shock, damage may be accumulated inside the product and unexpected malfunction may occur even during normal use. Be careful not to apply physical shocks
    to the main unit.

Components

Instructions

Remote Control
Aim the remote control at the receiving window of the main unit.
There is a built-in magnet on the back of the product, when the remote controller is not used, attach it as shown in the figure.

Charging
Open the rubber cover on the back of the main unit and connect the USB cable to the charging port to initiate charging.
When charging, battery indicator will flicker in 4 steps to show remaining battery. All 4 indicators turn on when fully charged.

Battery Level Check
When power (wind speed) button on product or remote control is pressed while fan is activated, battery indicator on the back displays battery remaining for 30 seconds.

Power bank function(external USB charging)
Charging starts automatically if you plug the included charging cable or the charging cable provided by a USB device(smart phone, tablet, PC, etc.) into the USB Out port of the product.
(On: Battery indicator is on)

Charging time may vary depending on the battery capacity of the product or external devices and the external environment.

Installation

Align the tripod stand with the groove on the tripod connection and turn it to the right as shown in the figure.
You can set the desired height by adjusting the angle of the leg.

Tripod socket
Other than the tripod included, it can be mounted on other tripods as well.
Compatible with all accessories using 1/4-inch screws.

Up and down angle adjustment
The angle of the head can be adjusted up to 60 degrees.

Left and right adjustment of head is not available.
If you force it to adjust the angle, it may damage the product.

Handle, Stand & Hook

There is a handle on the back of the product for convenient portability. When using it without a tripod, a stand can be used, or it can be used upside down by connecting a carabiner.

How to separate and clean the safety cage

• Hold the head as shown and turn the outer side of the front safety cage counterclockwise to separate it.
• Place the separated safety cage back into the head, turn it clockwise, and, when you hear the click, it is affixed. When the arrow on the bottom and the slot are aligned, it is mounted correctly.

• The safety cage can be washed with water after separation. After washing, dry it well before re-mounting it onto the main unit.
  • Be sure to turn off the power when separating the safety cage.
  • Do not wash the main unit with water. Please wipe it with a wet wipe or a dry cloth.
  • The blades cannot be separated.

Warranty

1. Thank you for purchasing CLAYMORE series of Prism Co., Ltd.
2. This product has passed strict quality control tests. If the product is not functioning properly, please contact an authorized service center listed below.

Free Service

1. Failure of the product under normal operating conditions during the warranty period will be repaired by Prism or authorized service center on free of charge.
   Some shipping or handling charges may be involved.

2. Warranty period: 1 year

Charged Service

1. Damage caused when the warranty period is over
2. Damage caused due to the user’s mishandling, abuse, or improper operation
3. Damage caused by arbitrary or personal repair or disassemble in unauthorized service center
4. Damage from input electricity or cable defect
5. Damage caused by natural disaster

Specifications

Prism Co., Ltd.

221, Pyeongcheon-ro, Bupyeong-gu, Incheon, Republic of Korea
www.claymorelight.com · www.prismlight.co.kr · info@prismlight.co.kr

References

• CLAYMORE
• (주)프리즘 공식몰

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>