HOOKE ROAD BXG.2081-S Rear Fender Flares Installation Guide
- June 17, 2024
- HOOKE ROAD
Table of Contents
HOOKE ROAD BXG.2081-S Rear Fender Flares Installation Guide
Contents:
Qty | Part Name | Size(mm) | Picture |
---|---|---|---|
8 | Button Head Socket Cap Bolts Screw | M6*25 | |
8 | Flat Washer | M6201.5 | |
8 | Rivet Nut | M6 | |
1 | Rivet Nut Tool | M6 |
Tools required:
a. 4mm Hex Bit Socket;
b. 14mm Wrench;
c. 4mm, 5mm Allen Wrench;
Installation time
About 1.5 hours, 1-2 people may be needed. Installation time may differ
according to your mechanical skill level.
(PLEASE VERIFY ALL PARTS ARE PRESENT AND READ INSTRUCTIONS CAREFULLY BEFORE
STARTING INSTALLATION!)
To view the electronic version (BXG.2081-S), please scan the QR code.
Installation instruction:
Driver Side Installation:
Step 1 : Remove the factory rear fender flares. Ready to install our
product.
Step 2 : Install the rivet nut in the four holes with the rivet nut tool
(If you use our rear inner fender liners, you only install the rivet nut in
the most left and the right holes). the rivet nut tool instruction: The 5mm
Allen wrench use in the top, 14mmwrench stuck on the middle nut. Put the rivet
nut in the hole, screw the threaded end of the rivet nut tool into the rivet
nut
**(Notice: Must be screwed to the bottom), finally unscrew the rivet nut tool
out.
Step 3:* At last, lift up the rear fender flares. Align the vehicle frame, install it with the Button Head Socket Cap Bolts Screws (M625), Flat Washer(M6201.5). Tighten up those bolts.
Step 4: Repeat the above installation steps in the passenger side. Recover the factory or modified inner fender liners.
Step 5: The installation is complete. We hope you enjoy a wonderful off-
road life with this quality Hooke Road product!
Attention:
- The product parts in this instruction may differ slightly from the actual product contents but generally does not affect the installation of the product.
- Please feel free to contact your distributor if you have any kind of question about your purchase.
Google Hooke Road to find your parts.
Feel Free To Share Your Vehicle @HookeRoad4x4 With The Hashtag #hookeroad
If You’d Like