SuperLightingLED VD3 3 Button RF RGB LED Controller Owner’s Manual
- June 17, 2024
- SuperLightingLED
Table of Contents
SuperLightingLED VD3 3 Button RF RGB LED Controller
Models
Model No.: VD3
3 channel constant voltage/Max 4.5A output/3-button/Wireless remote control
/Step-less dimming
Features
- 3-channel constant voltage RGB LED RF controller.
- 1.5A per channel, output connects with 5 meters RGB LED strip.
- 3 buttons operation with on/off, mode and colour adjustment.
- Match with 2.4G single zone or multiple zone RGB remote control optional.
- 256 levels 0-100% dimming smoothly without any flash.
- Built-in 10 dynamic modes, including jump or gradual change style.
Technical Parameters
Input and Output
Input voltage| 5-24VDC
Output voltage| 5-24VDC
Output current| 3CH, 1.5A/CH
Output power
| 22.5W@5V
54W@12V
108W@24V
Environment
Operation temperature| Ta: -30 OC ~ +50 OC
Case temperature (Max.)| Tc: +85 OC
Dimming data
| Input signal | 3 button + RF 2.4GHz |
|---|---|
| Control distance | 30m(Barrier-free space) |
| Dimming grayscale | 4096 (2^12) levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 2KHz (default) |
| Warranty | 5 years |
| Protection | Over-heat |
Safety and EMC
EMC standard (EMC)
| ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Safety standard| EN 62368-1:2020+A11:2020
Radio Equipment(RED)| ETSI EN 300 328 V2.2.2
Certi cation| CE, EMC, RED
Package
Size| W120 x L43 x H27mm
Gross weight| 0.013kg
Dimension
Wiring Diagram
Note:
- Press and hold the and button for 2s, the output LED flashes 3 times, and the light on/off fade time will change between 3s and 0.5s.
- Press and hold the , and button for 2s, output LED flashes multiple times, switch between “GRB” (flashes 1 time), “RGB” (flashes 2 times), “BRG” (flashes 3 times) and “BGR” (flashes 4 times) output sequences, default is GRB.
Button Function
- : Turn on or off the light.
- : Short press to change 24 static RGB colours, long press for 1-6s to adjust 256 levels of brightness continuously.
- : Short press to change 10 dynamic modes, long press 2s to adjust speed, 10 levels.
Dynamic mode list:
Match Remote Control
Match Remote Control (optional)
The end user can choose the suitable match/delete ways. Two options are
offered for selection:
Use and button
Match:
- Long press and button 2s, the output LED blinks 2 times, immediately press the on/off key (single zone remote) or zone key (multiple zone remote) of the remote.
- The output LED blinks 3 times means the match is successful.
Delete:
Press and hold and button for 5s to delete all matches, The output LED blinks
5 times means all matched remotes were deleted.
Use Power Restart
Match:
- Switch off the power, then switch on power again, and immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 3 times on the remote.
- The output LED blinks 3 times means the match is successful.
Delete:
- Switch off the power, then switch on power again, and immediately short press the on/off key (single zone remote) or zone key (multiple zone remote) 5 times on the remote.
- The output LED blinks 5 times means all matched remotes were deleted.
Dimming curve
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>