L-Link AC1200 WiFi Extender Internet Booster with Ethernet Port Instructions
- June 14, 2024
- L-Link
Table of Contents
L-Link AC1200 WiFi Extender Internet Booster with Ethernet Port
Product Parameters
Product Model
| ****
AC1200
| ****
Product Size
| 1108555mm
---|---|---|---
Product Type
| Dual-band
wireless repeater
| ****
Antenna Direction
| Omnidirectional
Installation| ****
Direct plug-in
| ****
Product Color
| ****
White
WIFI
Frequency
| ****
2.4GHz&5.8Ghz
| ****
Power Supply
| ****
AC 110〜240V
Working
Temperature
| 0℃-40℃| ****
Working Humidity
| 10%～90%
non-condensation
Indicator light and interface description
LED| Power LED| The blue light is always on, indicating
Indication Light| | that the device starts normally.
---|---|---
The blue light flashes to indicate that
the device is starting.
The blue light is off, indicating that the
the device is not powered on.
WPS indicator light
| A blue light flashes, indicating WPS
negotiation is in progress.
The blue light is off, it means WPS is
not triggered
Signal indicator light （SYS）
| A blue light indicates a strong signal
A green light indicates moderate signal
The red light means the signal is weak
Light off, identification not relayed or relayed unsuccessful
WPS Button| ****
Press short for 1 second to trigger WPS
Reset Button| Long press for more than 6 seconds to restore the equipment to factory state.
Quick Configuration Instructions
Starting device
Insert the repeater into a power outlet near the router and adjust the antenna
to the right direction(generally upright and perpendicular to the ground).
When the power indicator flashes from the blue light to the normal blue light,
the start-up is complete
Wireless extensions —Repeater Mode
Turn on your phone’s or computer’s WIFI and search for the connection repeater
SSID(“WLAN-Repeapter-2.4G/WLAN-Repeater-5G ), The default is no password.
After a successful connection, open the browser and enter “192.168.10.1” in
the browser to enter the management WEB for quick configuration.
Step 1: Set administrative password.
Step2: Scan and select the router’s WIFI signal that needs to be extended.
Step 3: Enter the router WIFI password/set the expanded wireless name.
- Router WIFI password
- Expanded 2.4Ghz Wireless name
- Expanded 5.8Ghz wireless name
Note: The expanded wireless password is the same as the original router password. If you want to use seamless roaming, please set the expanded SSID to be the same as the main route.
Step 4: Confirm extended information.
Step 5: Observe the STATE of the LED, complete the configuration, and connect the SSID of the repeater again.
Cable extension—AP Mode
Turn on your phone’s or computer’s WIFI and search for the connection repeater SSID(“WLAN-Repeapter-2.4G/WLAN-Repeater-5G”), The default is no password. After a successful connection, open the browser and enter “192.168.10.1” in the browser to enter the management WEB for quick configuration.
Step1
Set administrative password
Step2
Select AP Mode and set the wireless name and wireless password
Step3
After the configuration is completed, take a network line to connect the
repeater’s LAN port to the router’s LAN port, and then connect the repeater’s
SSID again to get online normally.
Packing list
Serial
number
| ****
Name
| ****
Function
| ****
Units
| ****
Number
---|---|---|---|---
1| Host devices| Dual-band wireless repeater| Table| 1
2
| ****
Instructions
| User Instruction
(including warranty card)
| ****
Set
| ****
1
Frequently Asked Questions
Q: After configuring the relay successfully, the extended wireless network
has been disconnected and SYS semaphores are not on. How to deal with this?
A: Two situations cause this problem:
First, The repeater is too far away from the router and beyond the relay
range; Second, The wrong wireless password was entered while configuring the
repeater; Users can try to take the repeater to the socket near the router and
plug it in. If the SYS signal light is still not on, you need to restore the
repeater to the factory settings (press reset for 6 seconds) and then
reconfigure it (the wireless password should be input correctly when checking
the configuration)
Q: A repeater that is already in normal use, what if you want to replace
the main route?
A: You need to Reset the repeater to factory Settings (long press Reset
6S) and then reconfigure it.
Q: Other unknown problem that causes the repeater to be unable to use
normally, how to deal with?
A: You need to Reset the repeater to factory Settings (long press Reset
6S) and then reconfigure it.
Q: How to operate a WPS one-key connection?
A: It is required that the router also supports the WPS function. After
the repeater starts normally, press the WPS button of the repeater first, and
the WPS indicator starts flashing. Then, press the WPS button of the router
again within 2 minutes, and the automatic connection can be completed. After a
successful connection, there will be a suffix: ext-2G & Ext-5G wireless name,
which can be reconnected (the wireless password is the same as the router’s
wireless password).
Warranty Terms
Dear customers
Good day！
First of all, thank you for buying our products. Thanks again! To facilitate
us to provide you with quality and satisfactory after-sales service, but also
better protect your rights and interests. Please read this clause carefully.
Quality Commitment
The company adheres to the “user is God” purpose, to provide customers with
quality and satisfactory after-sales service. All products sold by the company
are guaranteed to provide free warranty service for one year.
The specific regulations are as follows
- Within one year from the date of purchase, our company will provide free warranty service for any defects that occur during normal operation under a normal operating environment according to relevant technical information.
- After more than one year from the date of purchase, our company will provide paid maintenance services.
- If you buy our products, you can enjoy our most professional technical service support and provide the latest upgrade software package service for free.
- Failure and damage caused by force majeure factors (such as fire, lightning, flood, etc.) are not covered by the warranty.
- If the products within the warranty period are too damaged to be repaired or the accessories of this model have stopped supply, our company will provide other products of equivalent value for replacement. For the replaced products, if there is a price difference during the period, the price difference will be made up by the customer, and the replaced products will no longer enjoy the service of non-product fault replacement.
- In case of any of the following circumstances, the products are not covered by a free full warranty, replacement, or return. Even if the products are within the warranty period, our company will charge relevant maintenance fees.
The repaired products have the following phenomena
- Burn marks Defect or damage of components Solder defects
- Operational negligence includes: If the crystal head is connected to the wrong wire, the product is damaged without wearing an anti-static bracelet (for the bare board), such as chip burning, whole machine damage, shield cover damage, radio frequency head damage, etc.;
- Other problems and faults caused by abnormal use (mainly power supply or non-standard power supply);
- Do not follow the installation and configuration instructions;
- If the main board is so badly burned that it cannot be maintained, a new main board shall be purchased for replacement;
- Damage caused by disassembling, repair, or alteration of the circuit by the user;
- Incomplete product information, such as warranty label /MAC address /SN code on the body, date paper removed, damaged or altered, model sticker removed;
- Unauthorized modification of non-our company’s firmware