Ronix 3113V 115mm Mini Angle Grinder User Manual

Ronix 3113V 115mm Mini Angle Grinder

Specifications:

• Model: 3113V
• Power: 850W
• Voltage: 110V
• Frequency: 50-60Hz
• No-load RPM : 12000
• Wheel Diameter : 100mm/4″ and 115mm/4.5″
• Spindle Size : M14
• Weight: 1.8Kg

Product Usage Instructions

Safety Instructions:

• Read all safety warnings and instructions provided in the user manual.
• Keep the work area clean, well-lit, and free from clutter.
• Avoid operating the grinder in explosive atmospheres.
• Keep children and bystanders away while operating the tool.
• Use a cord suitable for outdoor use when working outside.

Power Tool Use and Care:

• Ensure the tool is properly serviced by a qualified professional using genuine replacement parts.
• Avoid using accessories that require liquid coolants to prevent electrocution or shock.
• Do not attach blades that may cause kickback or loss of control.

Additional Safety Regulations:

• Keep the power cable away from the working area.
• Ensure the grinder and handles are free from oil, grease, and liquids.
• Avoid touching the workpiece or metal filings until they have cooled down.
• Avoid working on items made of magnesium with the grinder.

TECHNICAL SPECIFICATION

PART LIST

WARNING!

• The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used, and Before using the product, please wear suitable gloves, firmly grasp it in the right condition, keep good awareness, and avoid long time operating

SAFETY INSTRUCTIONS

GENERAL POWER TOOL SAFETY WARNINGS

WARNING!

Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded)power tool or battery-operated (cordless) power tool.

WORK AREA SAFETY

• Keep work area clean and well-lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug-in anyway. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for MANUAL 3for outdoor use. The use of a cord suitable for outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust masks, non-skid safety shoes, hard hats, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to the power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

SERVICE

• Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

SAFETY WARNINGS COMMON FOR GRINDING OR ABRASIVE CUTTING-OFF OPERATIONS

• This power tool is intended to function as a grinder. Read all safety warnings, instructions, illustrations, and specifications provided with this power tool.

• Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.

• Operations such as sanding, wire brushing, and polishing are not recommended to be performed with this power tool. Operations for which the power tool was not designed may create a hazard and cause personal injury.

• Do not use accessories that are not specifically designed and recommended by the tool manufacturer. Just because the accessory can be attached to your power tool, it does not assure safe operation.

• The rated speed of the accessory must be at least equal to the maximum speed marked on the power tool. Accessories running faster than their rated speed can break and fly apart.

• The outside diameter and the thickness of your accessory must be within the capacity rating of your power tool. Incorrectly sized accessories cannot be adequately guarded or controlled.

• The inner diameter of wheels, flanges, backing pads or any other accessory must properly fit the spindle of the power tool. Accessories with inner holes that do not match the mounting hardware of the power tool will run out of balance, vibrate excessively and may cause loss of control.

• Do not use a damaged accessory. Before each use inspect the accessories such as abrasive wheels for chips and cracks, backing pad for cracks, tear or excess wear, wire brush for loose or cracked wires.If a power tool or accessory is dropped, inspect for damage or install an unmanaged accessory. After inspecting and installing an accessory, position yourself and bystanders away from the plane of the rotating accessory and run the power tool at maximum no-load speed for one minute.
  Damaged accessories will normally break apart during this test time.

• Wear personal protective equipment. Depending on the application, use a face shield, safety goggles or safety glasses. As appropriate, wear a dust mask, hearing protectors, gloves, and a workshop apron capable of stopping small abrasive or workpiece fragments. The eye protection must be capable of stopping flying debris generated by various operations. The dust mask or respirator must be capable of filtrating particles generated by your operation. Prolonged exposure to high-intensity noise may cause hearing loss.

• Keep bystanders a safe distance away from the work area. Anyone entering the work area must wear personal protective equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond the immediate area of operation

• Hold power tool by insulated gripping surfaces only, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.

• Position the cord clear of the spinning accessory. If you lose control, the cord may be cut or snagged and your hand or arm may be pulled into the spinning accessory.

• Never lay the power tool down until the accessory has come to a complete stop. The spinning accessory may grab the surface and pull the power tool out of your control

• Do not run the power tool while carrying it at your side. Accidental contact with the spinning accessory could snag your clothing, pulling the accessory into your body.

• Regularly clean the power tool’s air vents. The motor’s fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards.

• Do not operate the power tool near flammable materials. Sparks could ignite these materials.

• Do not use accessories that require liquid coolants. Using water or other liquid coolants may result in electrocution or shock.
  NOTE:

• The above warning does not apply for power tools specifically designed for use with a liquid system.

KICKBACK AND RELATED WARNINGS

Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory’s rotation at the point of the binding.
For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch-point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump toward or away from the operator, depending on the direction of the wheel movement at the point of pinching. Abrasive wheels may also break under these conditions. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below.

• Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use an auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces if proper precautions are taken.
• Never place your hand near the rotating accessory. The accessory may kick back over your hand.
• Do not position your body in the area where the power tool will move if kickback occurs. Kickback will propel the tool in a direction opposite to the wheel’s movement at the point of snagging.
• Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.
• Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create frequent kickbacks and loss of control.

ADDITIONAL SAFETY WARNINGS SPECIFIC FOR ABRASIVE

CUTTING-OFF OPERATIONS

• Do not “jam” the cut-off wheel or apply excessive pressure. Do not attempt to make an excessive depth of cut. Overstressing the wheel increases the loading and susceptibility to twisting or binding of the wheel in the cut and the possibility of kickback or wheel breakage.
• Do not position your body in line with and behind the rotating wheel. When the wheel, at the point of operation, is moving away from your body, the possible kickback may propel the spinning wheel and the power tool directly at you.
• When the wheel is binding or when interrupting a cut for any reason, switch off the power tool and hold the power tool motionless until the wheel comes to a complete stop. Never attempt to remove the cut-off wheel from the cut while the wheel is in motion otherwise kickback may occur. Investigate and take corrective action to eliminate the cause of wheelbinding.
• Do not restart the cutting operation in the workpiece. Let the wheel reach full speed and carefully reenter the cut. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece.
• Support panels or any oversized workpiece to minimize the risk of wheel pinching and kickback. Large workpieces tend to sag under their own weight. Supports must be placed under the workpiece near the line of cut and near the edge of the workpiece on both sides of the wheel.
• Use extra caution when making a “pocket cut” into existing walls or other blind areas. The protruding wheel may cut gas or water pipes, electrical wiring or objects that can cause kickback.

SAFETY WARNINGS SPECIFIC FOR GRINDING OPERATIONS

• Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel. Wheels for which the power tool was not designed cannot be adequately guarded and are unsafe.
• The guard must be securely attached to the power tool and and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect the operator from broken wheel fragments and accidental contact with the wheel.
• Wheels must be used only for recommended applications. For
• example : do not grind with the side of the cut-off wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter.
• Always use undamaged wheel flanges that are of the correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges.
• Do not use worn-down wheels from larger power tools. The wheel intended for a larger power tool is not suitable for the higher speed of a smaller tool and may burst.

SPECIAL SAFETY REGULATIONS

• Check that the ventilation slots are not blocked. Always secure the item to be worked with cramps or the like. Never hold the item to be worked by hand.
• Always use the correct type of grinding disc for the type of work to be performed.
• Never use discs with a Maximum RPM less than that of the tool.
• Never use oversized discs.
• Never use damaged or worn discs, or discs that cannot be easily fitted to the grinder spindle. Never use an adapter ring or the like-to-fit discs with holes that are too large for the grinder spindle.
• Never place your hand or fingers near the disc while the grinder is running.
• Keep the power cable well clear of the working area.
• Keep the handles and the grinder as a whole free of oil, grease, water and other liquids.
• Never put the grinder down until the disc has completely stopped rotating.
• Do not touch the item to be worked or metal filings until they have cooled.
• Do not use the grinder to work items made of magnesium.

SYMBOLS

• The rating plate on your tool may show certain symbols.
• These represent import information about the product or instructions on its use.

READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE

PREPARATION FOR USE

WARNING!

Prior to assembly and adjustment always pull out the power plug from the mains socket.

ADJUSTING THE WHEEL GUARD

WARNING!

TO PREVENT SERIOUS INJURY: Do not use the tool without the wheel guard properly installed

1. loosen the wheel guard bolt
2. rotate the wheel guard as you need a shield during your planned work.
3. tighten the wheel guard bolt securely
4. check the wheel guard it is firmly in place, and adjust if necessary before proceeding.

INSTALLING THE SIDE HANDLE

WARNING!

TO PREVENT SERIOUS INJURY: Do not used the tool with one handle only or without side handle properly installed.

1. the side handle may be installed on either side of the gearcase.
2. screw the threaded end of the side handle into the selected position. tighten securely before working.

FIXING GRINDING DISC

Pull out the power plug.
Depress and hold down the spindle lock 2 to tighten the spindle. Turn the shaft until it was locked. Remove the outer flange (c) and tighten the flange using the special wrench (d) provided.
Fit the desired disc (e) on the inner flange and replace the outer flange and tighten the flange. Release the spindle lock.

WARNING!

only use wheels with maximum safe operating speed rated at or above the RPM listed on the “WARNING” selection of the tool`s nameplate.This speed is based on the strength of the wheel, allowing for a reasonable measure of safety,It is not meat to imply a best or most efficient operating speed , Donot exceed the Maximum Safe Operating Speed.

SWITCHING ON/OFF

1. Plug the cord set into the power socket.
2. To start the tool press the ON/OFF switch button to the “1” position, stand in this position the machine will work continuously
3. To push the ON/OFF switch button to the “0” position,the machine stops working.

MOTOR

It is vital for the motor to be well-ventilated during operation. Be sure to keep the ventilation holes clean at all times.

Hold the main handle and side handle firmly and switch on. Avoid blocking the ventilation slots with your hand, as this may cause the grinder to overheat. Let the disc reach full speed. Apply the grinder to the item. The maximum effect is achieved when the grinder is held at an angle of 15-30°in relation to the item. Move the grinder gently along the item. Give the grinder time to work. It is rarely

MINI ANGLE GRINDER

necessary to press the disc hard against the surface to be worked. Sparks can occur in the motor compartment during use. This is normal and does not mean the grinder is defective. Switch off the grinder after use.

CLEANING AND MAINTENANCE

The grinder can be cleaned by wiping its exterior parts with a dry cloth. Filings and dust can be removed using compressed air. Do not use water for cleaning! Ensure the ventilation slots are free of dust and dirt. Never use corrosive or abrasive detergents, as they may attack the plastic parts of the machine.

RECYCLING

Meaning of crossed-out wheeled dustbin: Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities. Contact you local government for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health and well-being.

• www.ronixtools.com

FAQS

Q: Can I use this angle grinder with a different power source

A: No, this angle grinder is designed for use with a 110V power source only. Using a different voltage may damage the tool.

Q: What should I do if the cutting wheel gets stuck during operation

A: If the cutting wheel gets stuck, immediately switch off the grinder, disconnect it from the power source, and wait for the wheel to come to a complete stop before attempting to free it.

Q: How often should I replace the cutting wheel

A: It is recommended to regularly inspect the cutting wheel for wear and replace it if any signs of damage or wear are visible to ensure safe operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>