KODAK VERITE 55W ECO Wireless All In One Inkjet Printer User Guide

: June 17, 2024
: Kodak

VERITE 55W ECO Wireless All In One Inkjet Printer

Product Information

Specifications

Product: Wireless All-In-One Inkjet Printer
User Guide: https://manual-hub.com/

Product Usage Instructions

Introduction

Welcome to the user guide for the Wireless All-In-One Inkjet
Printer. In this guide, you will find detailed information on how
to set up and use your printer. Please read through the
instructions carefully before using the product.

Notice and Safety

Dear Customer,

We want to ensure your safety while using our product. Please
take a few moments to familiarize yourself with the safety
guidelines provided in this user guide.

About this Extended User Guide

This extended user guide provides in-depth information on
various aspects of the printer, including initial setup, printing
from mobile devices, troubleshooting, and more. Use the table of
contents to navigate through the guide easily.

General Safety Information

Prior to using the printer, please review the following general
safety information:

Keep the printer away from children and pets.
Avoid placing the printer near heat sources or direct
sunlight.
Always use the power cord and adapter provided with the
printer.
Do not attempt to disassemble or repair the printer yourself.
Contact customer support for assistance.

Overview

The overview section provides a brief introduction to the
printer’s features and functionalities.

Control Panel

The control panel is located on the front of the printer and
allows you to navigate through various settings and options. Refer
to the user guide for a detailed explanation of each control panel
button.

Meaning of LED Behavior and Lights

The LED lights on the printer indicate different statuses and
conditions. Consult the user guide for a comprehensive list of LED
behaviors and their meanings.

Initial Operation

Before using the printer, it is important to perform the initial
operation. This includes unpacking the printer, installing ink
cartridges, and loading paper. Follow the step-by-step instructions
provided in the user guide.

Initial Setup

To ensure proper functionality, you need to set up the printer
correctly. The user guide contains detailed instructions on how to
connect the printer to your computer or mobile device, configure
network settings, and perform the initial setup process.

Print Using Your Smartphone/Tablet

The printer allows you to print directly from your smartphone or
tablet. Use the mobile app provided or connect to the printer
wirelessly. The user guide provides step-by-step instructions on
how to print from your mobile device using different methods such
as Google Cloud PrintTM and AirPrint.

Check Print Status from Your PC

If you want to monitor the print status from your computer, the
user guide explains how to check print status, view print queues,
and troubleshoot any issues that may arise.

Print Media

The printer supports various types of print media. Refer to the
specifications section in the user guide for a comprehensive list
of compatible print media. Additionally, the user guide provides
instructions on how to insert paper into the paper support.

Web Interface

The printer’s web interface allows you to access additional
settings and configurations. The user guide explains how to access
and navigate the web interface to customize your printer’s
settings.

Service

If you encounter any issues with the printer, the user guide
provides troubleshooting steps to help you resolve common problems.
If the issue persists, contact customer support for further
assistance.

Appendix

The appendix section contains additional information such as
specifications, recycling guidelines, safety data sheets, and the
limited warranty. Please refer to the user guide for more
details.

FAQ

Q: How do I connect the printer to my mobile device?

A: To connect your mobile device to the printer, you can either
use the mobile app provided or connect wirelessly using methods
like Google Cloud PrintTM or AirPrint. Detailed instructions can be
found in the user guide.

Q: What types of print media are compatible with this

printer?

A: The printer supports a variety of print media. Please refer
to the specifications section in the user guide for a comprehensive
list of compatible print media.

Q: How can I improve the print quality?

A: If you are experiencing issues with print quality, the user
guide provides tips and troubleshooting steps to help you improve
the output. Refer to the “Improving the print quality” section for
detailed instructions.

Q: Where can I find information about recycling the

printer?

A: Detailed information about recycling the printer can be found
in the “Note about recycling” section of the user guide. Please
follow the guidelines provided to dispose of the product
responsibly.

Q: What should I do if I encounter an issue that is not covered

in the user guide?

A: If you encounter an issue that is not addressed in the user
guide or if the troubleshooting steps do not resolve the problem,
please contact our customer support for further assistance.

55W Eco/Verité 55 Eco
Wireless All-In-One Inkjet Printer
Extended User Guide
? We’re glad you chose this KODAK VERITÉ Wireless All-In-One Inkjet Printer. Need help fast? Read your Setup Manual and/or Extended User Guide first for quick tips that make using your KODAK VERITÉ Wireless All-InOne Inkjet Printer more enjoyable. If you have read your instructions and still need assistance, you may access our online help at www.kodakverite.com/support or call 1-844-995-6325 (1-844-99KODAK) Details, explanations, and expressions displayed on your smartphone/tablet/PC display may differ from those shown in this Extended User Guide. The displayed items and specifications are subject to change without notice.

Contents
Introduction ……………………………………………………… 3
Notice and Safety …………………………………………………………………………….. 3 Dear Customer ………………………………………………………………………………… 3 About this Extended User Guide …………………………………………………….. 3
General safety information ………………………………… 4

Settings………………………………………………………….. 35
Device Sleep Time………………………………………………………………………….. 35 Wi-Fi Setup…………………………………………………………………………………….. 35 Google Cloud PrintTM ……………………………………………………………………… 37 AirPrint ……………………………………………………………………………………………38 Software update …………………………………………………………………………….. 38 Printer Utility ………………………………………………………………………………….38

Overview………………………………………………………….. 7
Control panel……………………………………………………………………………………. 8 Meaning of LED behavior and lights ……………………………………………….. 9

Initial operation ……………………………………………….. 11
Packing contents ………………………………………………………………………………11 Unpack………………………………………………………………………………………………11 Install ink cartridges ………………………………………………………………………..12 Load paper ……………………………………………………………………………………….13 Turn On the unit ………………………………………………………………………………13

Initial setup…………………………………………………….. 14
Before you download the printer driver to your PC…………………………14 Install the printer driver to your PC…………………………………………………15 Wi-Fi Setup………………………………………………………………………………………17 Changing connection type to Wi-Fi from USB connection ……………..18 Changing connection type to USB from Wi-Fi connection ……………..18 ECO mode ………………………………………………………………………………………..19

Print using your smartphone/tablet…………………..20

Use the mobile App ………………………………………………………………………..20

Mobile connection by

(Wireless) ……………………………………….21

Print from a Mobile Device ………………………………. 22
Google Cloud PrintTM ……………………………………………………………………… 22 AirPrint …………………………………………………………………………………………… 22

Check print status from your PC ……………………….. 23
Status Messenger for Windows® ………………………………………………….. 23

Print media …………………………………………………….. 24
Specifications for print media ………………………………………………………..24 Insert paper into the paper support……………………………………………….24

Web interface …………………………………………………..41
Confirming the IP Address ………………………………………………………………41 Calling the Web interface………………………………………………………………..41 Device Status ………………………………………………………………………………….42 Device Configuration………………………………………………………………………42 Network…………………………………………………………………………………………..42 Mobile……………………………………………………………………………………………..43 Order Supplies ………………………………………………………………………………..43 Software Update……………………………………………………………………………..44 Login Password ……………………………………………………………………………….44
Service ……………………………………………………………45
Checking ink levels………………………………………………………………………….45 Changing the ink cartridge……………………………………………………………..45 Ordering supplies……………………………………………………………………………46 Fixing a paper jam …………………………………………………………………………..46 Restoring the factory settings ………………………………………………………..47 Power cycling ………………………………………………………………………………….47 Cleaning the ink cartridge nozzles and contacts……………………………47 Preserving the ink cartridges ………………………………………………………….48 Cleaning the scanner glass……………………………………………………………..48 Cleaning the exterior of the unit …………………………………………………….48 Periodic maintenance is required …………………………………………………..48 Important Notice Regarding Printheads…………………………………………48
Troubleshooting ………………………………………………49
Setup troubleshooting…………………………………………………………………….49 Status messages and LED behaviors……………………………………………… 53 Improving the print quality……………………………………………………………..58
Appendix………………………………………………………… 59
Specifications …………………………………………………………………………………. 59 Note about recycling ………………………………………………………………………59 Safety Data Sheet (SDS)…………………………………………………………………59
Limited Warranty …………………………………………….60

Print settings ………………………………………………….. 26
Confirming Printing Preferences for Windows®…………………………….26 Confirming Print Settings for Mac………………………………………………….28

Making copies………………………………………………….30
Copy Setting ……………………………………………………………………………………30

Scanner ………………………………………………………….. 32
Scan in [Scanning] application by Windows® ………………………………. 32 Scan in Mac ……………………………………………………………………………………. 33

English

Introduction

Notice and Safety

Please read the following instructions carefully before operating the device and refer to them as needed to ensure the continued safe operation of your device.

Your KODAK Product and supplies have been designed and tested to meet strict safety requirements, including safety agency evaluation and certification, compliance with electromagnetic regulations and established environmental standards.

The safety, environmental testing and performance of this device have been verified using approved materials only.

WARNING:

Unauthorized alterations, which may include the addition of new functions or connection of external devices, may impact the product certification. Please contact your Customer Support representative for more information at www.kodakverite.com/support

Dear Customer

You’ve purchased a very different kind of printer and we are glad you did. Now we want to help you get started saving on ink and using all of it’s features. This Kodak Verité printer provides quality printing for personal and office / small business use and it always helps you save on the cost of printing. For printing, copying and scanning, this all-in-one printer utilizes the most up- to-date technology. Easy to install ink cartridges are always provided with our printers; however, you must remove all packaging used for transportation first.
You can find the latest Software drivers and manuals for the printer on the website:

About this Extended User Guide
Read the entire Extended User Guide carefully. Follow all safety instructions in order to ensure proper operation of your device. The manufacturer accepts no liability if these instructions are not followed.
· Symbols used in this Extended User Guide

Symbols

Description
DANGER Danger to Persons
This symbol gives warning of danger to persons. Physical injury or damage can result from improper handling.

C CAUTION

DO NOT TOUCH This symbol gives warning of danger to persons. Physical injury or damage can result from improper handling.
Damage to the Device or Loss of Data This symbol gives warning of damage to the device and possible loss of data. These damages can result from improper handling.

Note(s)

This symbol designates tips that will help you to use your device more effectively and easily.

www.kodakverite.com/support
We hope you enjoy your KODAK VERITÉ Wireless All-In-One Inkjet Printer and its many functions!
· Features

ECO mode · You can easily save ink consumption.
» Refer to “ECO mode” on page 19.

Paper requirement
· You can load up to 60 sheets of normal printer paper onto the Paper support.
» Refer to “Specifications for print media” on page 24.

ID Card Copy function
· Using the ID Card Copy function, you can copy both sides of a small document (e.g. business card) onto one page.
» Refer to “ID Card Copy” on page 31.

Web interface
· The web interface is available to you on all operating systems. You can access the web interface with an Internet browser on your PC and conduct many different settings to your device.
» Refer to “Web interface” on page 41.

Status Messenger (for Windows® only)
· The Status Messenger is available on the operating system. It is installed together with the printer driver and informs you of the newest driver, Software or application to download and install. Also, it shows the present status of the device. You receive detailed error messages among other things.
» Refer to “Check print status from your PC” on page 23.

Copying and scanning
· The device also supports copying and scanning of Color or Black & White documents. You can scan the document and save it to your Network PC.
» Refer to “Making copies” on page 30 and “Scanner” on page 32.

English

General safety information
Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.
The material in this Extended User Guide is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.
Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai will be adapted and published on the Funai support website as soon as possible.
· Warranty (Limited Warranty on page 60.)
· DO NOT attempt to take the device apart. There is danger of an electrical shock. No components are user serviceable. Opening the device voids the warranty. DO NOT disassemble or remove covers on the device. Repairs may only be done by an Authorized Service Center. Failure to do so shall void any warranty, stated or implied.
· Any operation expressly prohibited in this Extended User Guide, any adjustments or assembly procedures not recommended or authorized in this Extended User Guide shall void the warranty.
· DO NOT make any changes or settings that are not described in this Extended User Guide. Physical injury or damage to the device or loss of data can result from improper handling. Take note of all warning and safety notes indicated.
· DO NOT remove the product label located on the bottom side on your device; this would void the warranty.
· Setting up the device
Please read the following instructions when you set up the device.
· Select a stable location. Select a level, stable place with adequate space for air circulation. Make sure to allow extra space to open covers and trays. The setup area should be well-ventilated and away from direct sunlight or sources of heat, cold, and humidity. DO NOT set the device near the edge of your desk or table.
· Place the device on a flat and stable surface.
· The device should be placed securely. If the device should fall, it can be damaged or can cause injury to people, especially small children. If the device is dropped it should be inspected by an Authorized Service Center.
· Position all cables in such a way that no one will stumble on them, thus avoiding possible injuries to persons or damage to the device itself.
· Protect the device against direct sunlight, heat, large temperature fluctuations and moisture. DO NOT place the device in the vicinity of heaters or air conditioners. Observe the information on temperature and humidity in the technical data.
· The device must have sufficient ventilation and may not be covered. DO NOT put your device in closed cabinets or boxes. DO NOT place the device on soft surfaces such as tablecloths or carpets and do not cover the ventilation slits. Otherwise the device could overheat or degrade.
· The area in which you operate the device must be adequately ventilated, especially if the device is used frequently. Set up your device in such a way that the Heat or A/C vent’s air flow must be directed away from the work station.

· Never use a gas duster on this device. This gas trapped inside of this device may cause ignition and explosion.
· In the event that the device becomes too hot, or if you see smoke coming from the device, you must immediately disconnect the AC plug from the AC outlet. Have your device examined by trained professionals at an Authorized Service Center. To prevent the spread of fire, open flames should be kept away from the device.
· DO NOT allow liquids to enter into the device. Disconnect the device from the AC plug if liquids or foreign objects have entered the device and have your device examined by trained professionals at an Authorized Service Center.
· DO NOT allow children to handle the device without supervision. The packing materials should be kept out of the hands of children.
· DO NOT press forcefully on the scanner lid when you scan thicker documents or three-dimensional items, this could damage the scanner lid and/or the scanner glass.
· Make sure to place the device on a desk or table with adequate strength. DO NOT shake the device as this may cause printing failure or trouble. DO NOT place the device in a location or environment of high temperature or high humidity.
· Power supply
· Check whether the voltage rating of your device (indicated on the product label located on the bottom side) is adequate for the power source available at the setup location.
· DO NOT plug in the device in moist rooms. Never touch the AC Power cord or the AC plug connection with wet hands.
· Set up your device so that the AC Power cord is easily accessible. In an emergency, disconnect your device from the power supply by pulling the AC plug.
· Never touch the AC Power cord if the insulation is damaged. Turn Off the circuit breaker for that AC outlet.
· Damaged wire could cause fire or electrical shock. Keep the AC Power cord straight without being twisted, bent or scraped. Please contact an Authorized Service Center.
· Before cleaning the surface of your device, disconnect it from the power supply by only pulling the AC plug. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, or alcohol). DO NOT allow any moisture to reach the interior of the device.
· In rare cases, the saved settings can be partly or completely reset to the Factory Default(s) when the AC plug is disconnected or in the event of a Power outage. DO NOT disconnect the AC plug right after a print job or after entering settings.
· Press (Power/Standby) to turn the device On or Off (Standby). To completely turn Off the device, you must disconnect the AC plug. Disconnect the AC plug to shut the device Off when trouble is found or not in use. The AC Power cord shall remain readily available.
C CAUTION · Turn the device Off (Standby) using (Power/Standby) button located on the Control panel of the device before you disconnect the AC plug from the AC outlet to turn the Unit completely Off.

English

Continued on next page.

· Federal communications commission notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment may generate or use radio frequency energy. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an AC outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

· Declaration of conformity

Trade Name:

KODAK

Responsible party: FUNAI CORPORATION, Inc.

Product Name:

VERITE 55W ECO/37 (US / Canada) VERITE 55 ECO/37 (US / Canada)

Regulatory Model : JM502-30UA (VERITE 55W ECO/37) JM502-40UA (VERITE 55 ECO/37)

Address:

19900 Van Ness Avenue, Torrance, CA

90501 U.S.A.

Telephone Number: 1-844-995-6325 (1-844-99KODAK)*

Phone rings once, then no sound until agent answers.

For regulatory purpose, this product is assigned a regulatory model name. The regulatory model name should not be confused with the product name or product model.

· Canadian notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
CAN ICES-3(B)/NMB-3(B)

· PC connection Use only a custom high speed certified USB cable to connect the device to your PC. The recommendable cable length is no longer than 5 feet (1.5 m).

· Trademark information All other registered and unregistered trademarks are the property of their respective owners.
ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.
The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
The Wi-Fi Protected Setup Identifier Mark is a mark of Wi-Fi Alliance.
Google Cloud PrintTM is a trademark of Google Inc.
AirPrintTM and the AirPrint logoTM are trademarks of Apple Inc.
· Windows®, Windows® Server, Windows® Vista, Microsoft Edge, Internet Explorer® and the Windows logo are trademarks of the Microsoft group of companies in the United States and/or other countries.
· GoogleTM, Google ChromeTM, Chrome OSTM, Google DriveTM, GmailTM and AndroidTM are trademarks of Google Inc.
· Mac OS®, OS X®, iPhone®, iPod touch®, iPad®, Safari® and Mac logo® are trademarks of Apple Inc., registered in the U.S. and other countries.
· iOS is a trademark or registered trademark of Cisco® in the U.S. and other countries and is used under license by Apple Inc.
· Intel® CoreTM and CeleronTM are trademarks of Intel Corporation in the U.S. and/or other countries.
· Copyright All other trademarks referenced herein are the property of their respective owners.
· Cables Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations.
· Wireless Network The functioning of security systems, medical equipment or sensitive devices can be disrupted by the transmission power of the device. Observe any usage regulations (or restrictions) in the vicinity of such equipment. The use of this device can affect the operation of insufficiently shielded medical devices, hearing aids and pacemakers through the release of high frequency radiation. Also consult a doctor or the manufacturer of a medical device to establish whether these are sufficiently shielded from external high frequency radiation.

English

Continued on next page.

· Caution when handling ink cartridges Never open an ink cartridge. Store both new and used cartridges in a place where they will not come into the hands of children.
· Ink cartridge safety If ink gets on your skin, wash with soap and water. If ink gets into your eyes, flush immediately with water. If any discomfort or change in vision persists after washing, seek medical attention immediately.
For Safety Data Sheets (SDS) on inks, go to
www.kodakverite.com/support
· About the Software When carrying out a Software update only use the Printer Software Upgrade file for your device from the website: www.kodakverite.com/support Using other Software files can lead to your device not functioning properly. Funai accepts no liability for device malfunctions which can be traced back to the use of third party Software.
· When paper jam has occurred In case of a paper jam, remove the paper carefully out of the unit. Throw the paper away carefully.
DO NOT make any repairs to the unit yourself. Improper maintenance can result in injuries or damage to the unit. Only have your unit repaired by an Authorized Service Center.

· Copying and Scanning precautions Be aware that scanning, photocopying, or editing any of the following may be punishable by law.
Copyrighted work Unauthorized reproduction of copyrighted work is prohibited except for personal/domestic use or use in a limited extent based on that purpose. Reproducing a photographic portrait may also be subject to punishment.
Currency, securities, etc. Forging any of the following to use as genuine articles or producing misleading articles is subject to punishment by law.
· Banknotes, paper currency, coins (including foreign currency) · Government bonds, territorial bonds · Postal money order certificates · Postal stamps, documentary stamps · Capital stock certificates, debenture stock certificates · Bills, checks · Commuter passes, coupon tickets · Other valuable paper
Official documents Forging any of the following to use as genuine articles is subject to punishment by law.
· Licenses, copies of corporate registration, and other certifications/documents issued by public officials or government offices.
· Agreements/contracts, documents of “rights and obligations”, etc. for proof of facts created by private individuals.
· Seals, signatures, or symbol marks put on by public officials. · Private seals and signatures
Relative laws Criminal code, Copyright law, Act on Control of Imitation of Currency and Securities, Alteration and Imitation of Coins, Money Bills, Banknotes and Securities Circulating in Foreign States, Postal Act, Act on Control of Imitation of Postal stamps, Act on Punishment of Crimes Related to Stamps, Act on Control of Imitation of Stamps.

English

© 2016 Funai Electric Co., Ltd. All rights reserved.
The Kodak trademark and trade dress are used under license from Eastman Kodak Company.
Funai is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written consent of Funai.
No part of this manual may be reproduced, transmitted, disseminated or transcribed, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.
6

Overview
· Front view 1 Paper support 2 Paper guide 3 Scanner lid 4 Paper exit tray 5 Exit tray extender 6 Control panel and LED indicators
1 2 3
4 5

· When opening the lid/door 7 Scanner glass 8 Ink door 9 Ink cartridge holder
8 7
9
6
· Rear view 10 AC Power cord and AC plug 11 Printer USB port — USB connection for your PC

10 11

English

Continued on next page.

Control panel

(Black ink) LED

(Color ink) LED’s

(Power Yellow) — Indicates the present unit’s status. e.g.) power supplied, working
(Power Red) — Indicates the error status

(Paper Jam) LED

(Wireless) LED and button

(ECO) LED and button

(Copy) button

(Power) LED and Power/Standby button

1 2 3

4 5 6

· LEDs (Black ink) (Color ink) (Paper Jam)

7
— Indicates the black ink level or if empty. · Lights up: when ink cartridge is not inserted or empty. · Blinking4: If ink remains not enough. · Blinking6: Notifies if an error occurs.(Ink cartridge is not inserted or empty when the unit starts the initial setup.)
» Refer to “Meaning of LED behavior and lights – LED lighting patterns” on page 9 for lighting patterns.
— Indicates the color ink level or if empty. · Lights up: when ink cartridge is not inserted or empty. · Blinking4: If ink remains not enough. · Blinking6: Notifies if an error occurs.(Ink cartridge is not inserted or empty when the unit starts to initial setup.)
» Refer to “Meaning of LED behavior and lights – LED lighting patterns” on page 9 for lighting patterns.
— Indicates a paper jam has occurred.

(Wireless) (ECO)

— Indicates the connection status of the Wireless Network and Easy Simple Print.
— Indicates ECO mode

Note(s)
· You can find the meaning of status and error lights in “Meaning of LED behavior and error lights” on the next page. Please also note the messages displayed in the web interface, or in the Status Messenger (for Windows® only) on your PC.

· Buttons
(Wireless)
(ECO)

— Use to connect to the Wireless Network. · By using Easy Simple Print’ with the mobile device, press it less than 3 seconds to establish the Wireless Connection. · By using Wireless router if your router hasWPS’ button, press and hold it until the LED beside the button changes to blinking to establish the Wireless Connection. Follow “WPS Search”
in “Wi-Fi Setup” (right column)
on page 17.
— Use to shift ECO mode.

(Copy)

— Use to · start a copy job with the current settings.
Unit status: ready · Press and hold (less than 3 seconds): starts copying. · Press and hold (longer than 3 seconds): starts printing the configuration report.

— Press to perform the following:

(Power/Standby)

Press and hold less than 3 seconds:
· The unit goes into Sleep mode or goes back from the Standby.
· While Google Cloud PrintTM is active, the unit requests to start a registration.

Press and hold longer than 3 seconds:
(Make sure to wake the unit in advance if
the unit is in Sleep mode.)
· The unit goes into Standby mode. · The unit cancels the current
printing jobs (including test print and print reports), scanning or copying. · While Google Cloud PrintTM is active, the unit completes the registration.

Note(s)
· The function carried out will vary, depending on the unit’s status when you press a button.

· Factory Default Restore can be performed by pressing and

holding

and

together (more than 15 seconds).

English

Continued on next page.

Meaning of LED behavior and lights

Black ink LED — indicated by Color ink LED’s– indicated by Paper jam LED — indicated by Wireless LED — indicated by

ECO LED

— indicated by

Power LED — indicated by

· LED lighting patterns

Blinking 1 Blinking 2 Blinking 3 Blinking 4

Lights up for 1 sec. No light for 1 sec. Lights up very rapidly No light for more than 1 sec. Blinking very rapidly 2 times No light for 1 sec. Blinking very slowly

Blinking 5 Blinking 6 Blinking 7 Blinking 8 Blinking 9

Blinking slowly Blinking rapidly Blinking very rapidly Blinking very rapidly 4 times No light for 2 sec. Blinking slowly (in Power-on mode)

LED(s) All LEDs All LEDs
All LEDs

Behavior No light Lights up
and Blinking 9 Lights up
Blinking 5
Blinking 1 Blinking 1

Unit status Meaning / Possible cause(s)
Unit is turned Off (Standby). or in Sleep mode, a mode which is effective in saving power. Even in Sleep mode, the unit is able to receive a print job from USB / Network equipment.
Unit is Starting.
Indicates that the unit is Ready. The unit is able to receive a print job. This Yellow LED behavior is also used when copying, scanning or canceling copy or scan. Indicates that the unit is Running. This Yellow LED behavior is used when printing, canceling a print job and after the print jobs are received, running the alignment process (While running the alignment process, any new print job received will start printing after the alignment process is done. (The print job is not effected while the unit is scanning the alignment pattern.)).
This Yellow LED behavior is used when updating Software, restoring factory default, performing weekly maintenance.
System error occurred. Refer to page 53.

English

Continued on next page.

LED(s)

Behavior No light Lights up Lights up

ECO mode status Meaning / Possible cause(s)
Indicates that ECO mode0 (ECO Off).
Indicates that ECO mode1 is ON (Save 20% ink).
Indicates that ECO mode2 is ON (Save 20% ink, page reduced 12%).

LED(s)

Behavior Lights up Blinking 2 Blinking 3 No light Blinking 1 Blinking 7 Blinking 5

Network status Meaning / Possible cause(s)
The unit is connected to the Network using a Wireless connection.
Indicates that the unit started to connect to the Network using a Wireless connection or WPS (Wi-Fi Protected Setup) connection. The unit is not connected to the Network yet. Indicates that the unit is in Easy Simple Print and there is no connection point. Connection with Network equipment is not established yet.
Indicates that Wireless connection is Off. The unit is not connected to the Network.
Indicates that the unit is directly connected to your smartphone/tablet using Easy Simple Print connection. The unit is connected to the Network using Easy Simple Print.
Indicates that the Network connection has become unavailable and the unit is not currently connected to the Network.
Indicates that the unit is in the process of the Google Cloud PrintTM registration. Proceed to Google account registration and register this unit to your Google account.

Blinking 1

Indicates that the unit needs confirmation to start the Google Cloud PrintTM registration.

Blinking 7

Indicates that the WPS connection failed. The unit detected the Router, but failed to establish a connection.

Blinking 8 Blinking 1 (alternate
Yellow and Red)

Indicates a session overlap error. The session overlap error occurred because two Routers started the Wi-Fi Protection Setup simultaneously. Indicates that the unit received an identification request from AirPrint from an iOS device/Mac.

English

Initial operation
Packing contents
1 Unit 2 Setup Manual (Including Safety Sheet and Limited Warranty) 3 Black/Color ink cartridges
(Verité55 Eco: STD, Verité55 W Eco: STD, Verité55 W Mega Eco: 3XL)
1

Unpack

· Remove the unit and ink cartridges from the box, then remove the Start Here Guide.

Black

Color

Ink Cartridges

BLACK COLOR

Verité55 Eco: STD Verité55 W Eco: STD Verité55 W
Mega Eco: 3XL

2 1

JF230/JF240/JF210UA Turn power on

ES Encender la energía

FR Mettez l’appareil en m h

1 2

U1 What’s In The Box FR E*SCUâSCbBalbeclaUebSUleBSnnBoontnoinciconlmculdupeirdidso…

VeWritiréel5e5ssWPrEincteor/Verité

a npack b ES Desempaque FR Déballez

BLACK BLACK

55 Eco/Verité COLOR

Plus

COLOR

FR EMTS uEerntntcepezonlwd’aeeprrploaanreenileergníamarche

3 J0F2+30/JF240/#JF#
2#10#U#A

Wireless Printer

Verité 55W Eco/Verité 55 Eco/Verité 55 Plus

What’s In The Box USB cable not included. ES Cable USB no incluido.

FR *Câble USB non compris.

BLACK

COLOR

2 a b Unpack ES Desempaque FR Déballez

BLACK

COLOR

JF230/JF240/JF210UA 30+

Turn power on

ES Encender la energía

FR Mettez l’appareil en m h

GET STARTED HERE!
Unpack ES Desempaque FR Déballez

BLACK

COLOR

BLACK

COLOR

What’s In The Box
USB cable not included. ES Cable USB no incluido. FR *Câble USB non compris.

Verité 55W Eco/Verité 55 Eco/Verité 55 Plus 2 P M H 0 0 3 7 9 A

Wireless Printer

GET STARTED HERE!

Note(s)

BLACK

COLOR

Black

Color

Missing package contents
· If any of the parts are missing or damaged, please contact an Authorized Service Center.

· Removing packaging material from the unit
1 Remove tape and the plastic bag from the unit and then remove the twisted wire from the AC Power cord.
2 Lift the paper support up, then Remove the tape including the white paper.

FR ESTMuEertnntcepezonl’dwaeerpr lpoaanreeinleregníamarche

GET STARTED HERE!

2 P M JHF2030/JF240/JF#21#0##UA 0 3 7 9 A *

COLOR

BLACK BLACK

Plus aU1npackWhat’s In Thbe Box

GET

5 5

Eco/Verité

STARTED

5 5

Veri Witréele5s5s PWriEntceor/Verité

U1 What’s In The Box FR E*SCUâSCbBalebclaUebSUleBSnnBoontnoinciocnlmculdupierdidso…

VeWritiréel5e5ssWPrEincteor/Verité

a npack b ES Desempaque FR Déballez

BLACK BLACK

55 Eco/Verité COLOR

Plus

COLOR

FR EMTS uEerntntcepezonlwd’aeeprrploaanreenileergníam

3 J0F2+30/JF240/#JF#
2#10#U#A

HERE!

COLOR

ES DesempaqueGETFSRTARDTéEDb HalElReE!z

FR ES*CUâSCbBalebclaeUblSUeBSnnBootnnionciconlculmdupireidds.o..

Unpack1 2Wbhat’s In The Box c ESFDR eCEâsSbe*ClUemaSUbBplSecBaaUnqbSoluBenenncoootmininFpcRclruliusDid.doeé.db. allez

VeritWé 5ir5elWessEPcroin/tVererité

BLACK

COLOR

Eco/Verité

Plus

FR MEeStEtTenuzcrenl’napdpoepwraerlaerieol nneenrmgíaarche

3 0 + JF230 /JF
240#/#JF#2#1#0UA

3 Open the Scanner lid, then remove the protective paper.

2 1

English

Continued on next page.

Install ink cartridges
· Install ink cartridges to ink cartridge holder
1 Remove the black and color ink cartridges from packaging.

5 Set the color ink cartridge all the way into the cartridge slot on the right side. 1 Color(Right)

BLACK

COLOR

Black

Color

2 Remove the plastic tape on the black and color ink cartridges using the red pull tab.

Slid
2 Black(Left)

DO NOT TOUCH
· DO NOT TOUCH the gold contact area on the back or the metal nozzles on the bottom of the cartridge.

Slid
6 Set the black ink cartridge all the way into the cartridge slot on the left side.
7 Push and click the center green Cartridge tab to close the cartridge slot until the cover snaps securely into position.
Click !

3 Lift the Ink door to access the cartridge slot. 1

8 Close the Ink door.

2 4 Press outside blue Cartridge tab to open the cartridge slot.

C CAUTION Ink Cartridge Not Inserted Correctly!
· If the Ink door does not close properly, the ink cartridges are not inserted correctly. Remove the ink cartridges and then insert them again.
Green

Press!

1XL

2 XL

DO NOT PUSH the green/blue parts at the same time.

Blue

English

Continued on next page.

Load paper
· Set paper onto the paper support
1 Slide the paper guide to the left first.

Turn On the unit
1 Connect the AC plug to the AC outlet.

2 Fan the plain paper to be printed and then tap the paper sheets so the ends are the same.

2 Press

and then

unit is turned On.

(Power) LED will light up, when the

3 Set the plain paper (Letter or A4 size 20 lb. or 75 g/m2) onto the paper support. You can load up to 60 plain paper sheets. Slide the paper guide firmly against the edge of the paper.
2 1
4 Open the paper exit tray and the exit tray extender.

Note(s)

Loading Paper
· You can load up to 15 index cards or postcards, 10 glossy paper sheets or 5 envelopes on the paper support.
» Refer to “Print media” on page 24.

English

Initial setup

Before you download the printer driver to your PC
· Requirements Your PC must have one of the following operating systems.

Microsoft® Windows®

OS Version Windows® 10

Processor

Browser
Microsoft Edge

USB port

Windows® 8.1 Windows® 8 Windows® 7 Windows® Vista

32-bit (x86) or 64-bit (x64) Internet
Explorer®

USB 2.0 High Speed
or Full Speed

Windows® Server 2012

Windows® Server 2008

Apple Mac OS

OS Version
OS X v10.11 (El Capitan)

Processor

OS X v10.10 (Yosemite)
OS X v10.9 (Mavericks)

Intel® CoreTM Processor

OS X v10.8 (Mountain Lion)

Browser Safari

USB port
USB 2.0 High Speed
or Full Speed

· Make sure that your PC is turned On and you are logged on with administrator rights.
· In this Extended User Guide, the file extensions of the programs, files are omitted. If you set your PC to show the file extensions, the program and file names appear to be different from those described in this User Guide.
· In this Extended User Guide, the appearance of the screen images are based on Windows® 10; however, other operating systems (e.g., Windows® 8, etc.) provide basically the same operations. (There may be programs and functions named differently.)
C CAUTION · If there are any programs running, close them first.
· The screens may differ depending on your operating system.
· How to download the printer driver
1 From your computer go to www.kodakverite.com/support and confirm that the “DOWNLOADS” tab is selected.
2 Select [Verite55W Eco / Verite55 Eco] (this unit) from the pulldown menu of “Select Model Number”.
3 Select “Drivers and Software”, then follow the Instructions on your computer.

· Extraction of printer driver installer
For Windows® users 1 Double-click on the downloaded installer file to extract it.
KODAKVERITE55xxxx-vxxxxx.exe Driver’s version
2 If “User Account Control” window appears, click “Yes”.
For Mac users 1 Double-click the downloaded installer file to mount it.
KODAKVERITE55xxxx-vxxxxx.exe Driver’s version
2 The following window will appear. Double-click on [KODAK-VERITE 55W ECO Installer.mpkg] or [KODAK-VERITE 55 ECO Installer.mpkg].
Note(s) · If the installer does not start when you double-click [KODAKVERITE 55W ECO Installer.mpkg] or [KODAK-VERITE 55 ECO Installer.mpkg], please try the following steps: 1 Select [System Preferences] in the Apple Menu. The Apple Menu is located on the top left of the screen. Click the Apple Icon to display the pull-down menu. 2 Click [Security & Privacy]. 3 Click the [General] tab and you will see the [Allow application downloaded from:] option. If the setting is locked, please unlock it. The Lock Icon is displayed on the bottom left of the [Security & Privacy] window. Click the lock Icon to unlock. You may be required to enter the login password to proceed. 4 Select [Anywhere] from options listed. For more information, visit our FAQ on the website at – www.kodakverite.com/support

· Download Download the printer driver installer file to your PC.

English

Continued on next page.

Install the printer driver to your PC
There are two ways to connect to the unit.
Using Wi-Fi (Recommended)
· Once you double-clicked the printer driver installer, the printer driver starts to install to your PC through the Wi-Fi connection. Select this unit’s serial number to complete the printer driver installation.

6 Make sure plain Letter or A4 size paper is loaded in the paper support, click [Start].

7 The unit will start printing the alignment pattern.

1 Click [Continue]. 2 Click the check box ” Agree”, then click [Next].

8 Open the scanner lid and place the alignment pattern paper facing down on the scanner glass, then click [Next] after closing the scanner lid.

3 The following guidance will appear while the PC is searching the Network. 9 The unit will start scanning the alignment pattern to set an appropriate alignment on this unit.

Note(s)
· If you click Manual Wi-Fi Settings, you can set Wi-Fi Manually.
» Refer to “Wi-Fi Setup” on page 17.
4 If your PC cannot find the unit, the pop-up menu will appear for 5 seconds. Click the instruction for the connection method you have chosen, then read the help text for more details.

Note(s)
· Make sure to use only blank paper (sold separately). Never use colored or patterned paper when you set the alignment.
10 The following guidance will appear when the printer driver is installed to your PC successfully.

5 The unit’s serial number will appear when the PC finds the unit. Select the serial number, then click “Next”. The unit’s serial number is located on the sticker on the back side of the unit.

· Click “Test Print…” to make sure the printer driver is installed properly. (for Windows®)

English

Continued on next page.

Using USB Printer cable
· If you have connected between the unit and your PC by using the USB cable (sold separately), this connection has priority.
· Once you double-clicked the printer driver installer, the printer driver automatically starts to install to your PC without any guidance.

5 The unit will start printing the alignment pattern.

6 Open the scanner lid and place the alignment pattern paper facing down on the scanner glass, then click [Next] after closing the scanner lid.

1 Click [Continue]. 2 Click the check box ” Agree”, then click [Next].

7 The unit will start scanning the alignment pattern to set an appropriate alignment on this unit.

3 Driver Installation will start.

Note(s)
· Make sure to use only blank paper (sold separately). Never use colored or patterned paper when you set the alignment.
8 The following guidance will appear when the printer driver is installed to your PC successfully.

4 [Cartridge Setup] screen will be displayed on the Menu display. Make sure plain Letter or A4 size paper is loaded in the paper support, click [Start].

· Click “Test Print…” to make sure the printer driver is installed properly. (for Windows®)

English

Continued on next page.

Wi-Fi Setup
Select Wi-Fi Setup type and follow the Menu display instructions.

3 Press and hold

until the blinking pattern of

(Wireless) LED changes.

4 Click [Continue].
· WPS PIN
1 Click [WPS PIN].

Click Manual Wi-Fi Settings.
· Manual Connect Setting
1 Fill in the blank, Network Name(SSID), Security Mode, WEP key, then click [Manual Connect].

2 Connect up the Unit to your PC.

3 Enter Wireless pin code password.

· WPS Search
1 Click [WPS Search]. 2 Press and hold the WPS button on your Router for a few seconds.

4 Click [Continue].
Note(s)
· The factory default Network connection method is a DHCP connection (automatic acquisition).
· When performing Network connection, make sure the unit is not placed too far away from the access point/router and the access point/router is powered On and its settings are correct. If you need additional help on Network problems, visit our website at www.kodakverite.com/support
· If there are multiple printers on the Network, the window below will appear.

English

Select your printer’s serial number and click [Next].

Continued on next page.

Changing connection type to Wi-Fi from USB connection
USB always has priority. If you would like to change the connection type to Wi-Fi from USB connection, refer to the following instructions.
1 Disconnect the USB cable between this unit and your PC first.
Microsoft® Windows®
2 Click [Start]. 3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search]. 4 Change the connection type automatically.

6 Click the printer, select the driver from pull-down menu [Use], then click [Add]. · Make sure to choose FUNAI KODAK VERITE 55W ECO or FUNAI KODAK VERITE 55 ECO with [Bonjour Scanner] in [kind].
7 Select [FUNAI KODAK VERITE 55W ECO] or [FUNAI KODAK VERITE 55 ECO] added.

Changing connection type to USB from Wi-Fi connection
If you would like to change the connection type to USB from Wi-Fi connection, refer to the following instructions. 1 Connect the USB cable between this unit and your PC first.
Microsoft® Windows® 2 Click [Start]. 3 Select [All apps] > [KODAK VERITE] > [Device Settings] > [Printer
re-search]. 4 Change the connection type automatically after checking one of the
connections.

Apple Mac OS
1 Follow step 1 of ” Install the printer driver to your PC ” for “Using USB Printer cable” on page 16.
2 Disconnect the USB cable between this unit and your PC. 3 Activate [System Preferences]. 4 Click [Printers & Scanners].

5 Click [+] > [Add printer or Scanner…].

Apple Mac OS
1 Follow step 1 of ” Install the printer driver to your PC ” for “Using Wi-Fi (Recommended)” on page 15.
2 Connect the USB cable between this unit and your PC. 3 Activate [System Preferences]. 4 Click [Printers & Scanners].

English

Continued on next page.

5 Click [+] > [Add printer or Scanner…].

e. g. 2) Poster

6 Click the printer, select the driver from pull-down menu [Use], then click [Add].
· Make sure to choose FUNAI KODAK VERITE 55W ECO or FUNAI KODAK VERITE 55 ECO with [USB Multifunction] in [kind].

e. g. 3) Resizing (Paper : A4 Fit to paper size : A5)

7 Select [FUNAI KODAK VERITE 55W ECO] or [FUNAI KODAK VERITE 55 ECO] added.

ECO mode

You can easily save on ink consumption

· ECO mode status Mode

Ink Density 100%

Print Size 100%

ECO mode 0 (ECO Off) ECO mode 1 ECO mode 2

80% SAVE 20%!

100%

80% SAVE 20%!

88% (Reduced 12%)

SAVE 30% in total!!

· For ECO mode 2, the print size is reduced 94% vertically and horizontally to the center of the image.
e. g. 1) Paper size : Letter

e. g. 4) Layout : 2-up
· Selecting ECO mode, you can automatically save ink and reduce the size of your print.
· You can also select ECO mode under Printer Preferences of your PC. · If you set photo print borderless, the print size is not reduced. · If the printer goes into Sleep mode or is turned Off (Standby), ECO
mode will return to its default setting OFF.

English

Print using your smartphone/tablet
‘Easy Simple Print’ can print the data in your smartphone/tablet directly to the unit. Printing is also available by using the mobile App for AndroidTM or iOS. For more information, read the following requirements and usage for your smartphone/tablet.

Use the mobile App
Printing using the print application is available.
· How to download the mobile App
1 From your mobile device go to www.kodakverite.com/support 2 Confirm that the “DOWNLOADS” tab is selected, then select
[Verite55W Eco / Verite55 Eco] (this unit) from the pull-down menu of “Select Model Number”.
3 Select “Connect your Mobile Device”, then follow the Instructions. 4 Install Printer App on your smartphone/tablet using process
defined by App Site.

· Requirements Your smartphone/tablet must have one of the following operating systems.
AndroidTM

OS Version AndroidTM 4.0.3 or later

Memory required

Recommended product specification

5 MB or more free space

Built-in camera Wi-Fi

· In order to download the mobile App, you will need a Google Account or an Apple ID.

Note(s)
· Connect your mobile to the same Wireless Network that your unit is using.

5 When the install Icon appears on your smartphone/tablet display, then tap the install Icon.
· Please visit our website for more information about the mobile App – www.kodakverite.com/support
Note(s)
· The mobile App’s name and screen images display the current version. They may be changed due to updates.

English

Continued on next page.

Mobile connection by

(Wireless)

Note(s)
· Check whether your smartphone/tablet supports the code reading first.
1 Scan the code below (or on the Start Here Guide) with your smartphone/tablet and visit the address obtained.

2 Your smartphone/tablet will be connected to the website (store) where you can download the mobile App.
3 Install the mobile App. 4 After installation is completed, run the mobile App and follow its

directions and press

(Wireless) in order to connect your

smartphone/tablet with the unit.

(Wireless) LED will change from blinking to steady

lighting when connection is completed.

· If your smartphone/tablet and the unit have already connected

to the same router (Network), you do not need to press (Wireless).

· From the next time on, you do not need to scan the code. Simply run the mobile App, then follow its directions and press

(Wireless) to connect your smartphone/tablet with the unit.
Note(s)
· The code is a type of two-dimensional barcodes that can be read using smartphones/tablets.

English

Print from a Mobile Device
This unit supports Google Cloud PrintTM and iOS / OS X AirPrint.
Google Cloud PrintTM
Google Cloud PrintTM is a service provided by Google that allows you to print to the unit registered to your Google account using a Network-compatible device (such as a smartphone/tablet or PC), without installing the printer driver on the unit.
» Refer to “Google Cloud PrintTM” on page 37.

AirPrint
With iOS / OS X AirPrint, you can print photos, emails, web pages, and documents wirelessly from your Apple devices (iPhone, iPod touch, iPad). iOS / OS X AirPrint does not require a driver to be installed.
» Refer to “AirPrint” on page 38.
Note(s)
· Your Apple devices need to be connected to the same Wireless Network that your unit is using.

WPS
Google Cloud PrintTM

Note(s)
· In order to use Google Cloud PrintTM, you must have a Google account and sign in to your account.
· Make sure the unit and your smartphone/tablet or PC are connected to the Internet.
Supported operating systems and applications Google Cloud PrintTM is compatible with the following operating systems and applications:
Supported operating systems Chrome OSTM AndroidTM 2.1 or later iOS 3.0 or later
Applications that can be used for printing Applications for Chrome OSTM Google ChromeTM browser Google DriveTM for mobile GmailTM webmail service for mobile
· For more information about Google Cloud PrintTM, visit website at www.kodakverite.com/support 1
2

Supported operating systems Following Apple devices running the latest version: iPhone (3GS or later) iPod touch (3rd generation or later) iPad (all models) OS X (v10.7 or later)
· For more information about AirPrint, visit website at www.kodakverite.com/support 1
2
3 4
1 Click [RESOLUTION CENTER] 2 Select [Verité55W Eco / Verité55 Eco] (this unit) from pull-down
menu. 3 Select [Mobile]. 4 Select [Printing].

1 Click [RESOLUTION CENTER] 2 Select [Verité55W Eco / Verité55 Eco] (this unit) from pull-down
menu. 3 Select [Software – How to]. 4 Select [Google Cloud].

English

Check print status from your PC

Status Messenger for Windows®

The Status Messenger application automatically displays an error when a unit error has occurred. It is installed together with the printer driver, and is added to the Start-up program by default, so it will automatically launch at startup. It can also be activated from the Windows Start Menu. When the Status Messenger is activated, an Icon appears in the Windows® system tray.

Normal state:

Color: Green

Error or Warning:

Color: Red

For example, if there is no paper in the paper support, an error occurs when you try to print…

A Error Message
Insert Paper Printer: KODAK VERITE 55W ECO Click Here For More Information.

· Status Messenger Settings To configure the Status Messenger, right click on the Icon in the system tray and select [Settings].
Right click
You can change the following items in the Status Messenger Settings. · Alert me when a problem prevents printing
When checked: A message will pop up when an error occurs. · Alert me when my supplies are low
When checked: A message will pop up when information is available. · Show me detailed status about my supplies.
When checked: Status Monitor Center will be launched by clicking on the pop-up or the Icon in the Windows® system tray.

A pop-up appears from the system tray Icon to provide immediate error notification. If you click on the pop-up, an error recovery guide appears so that you can confirm a detailed explanation on how to fix the problem.

Settings for pop-up message and detailed information display can be configured in Status Messenger Settings.
For how to configure the settings, refer to the following instructions.

English

Print media
Specifications for print media
You can set up normal printer paper, envelopes or printed documents (forms) onto the paper support.

Insert paper into the paper support
1 Slide the paper guide to left side.

Paper Sizes Weight Capacity

Paper support
Letter · Legal · JIS B5 · A4 · Executive · A5 · Statement A6 · 3×5 in. · 4×6 in. · 5×7 in. · Hagaki · 3.5×5 in.(L) 10 Envelope · DL Envelope · C5 Envelope

Plain paper: Cards: Envelopes: Photo paper:

17 – 24 lb. (64 – 90 g/m2) 90 – 110 lb. (163 – 200 g/m2) 20 – 24 lb. (75 – 90 g/m2) 50 – 65 lb. (180 – 240 g/m2)

Plain paper (20 lb. or 75 g/m2): Cards (110 lb. or 200 g/m2): Envelopes (24 lb. or 90 g/m2): Photo paper (65 lb. or 240 g/m2):

Up to 60 Up to 15 Up to 5 Up to 10

2 Fan the plain paper to be printed and then tap the paper sheets so the ends are the same.

· Borderless printing is supported with paper sizes Letter, A4, A5, A6, 3×5 in., 4×6 in., 5×7 in., and Hagaki, when printing from your PC.

C CAUTION
Unsuitable Paper! · DO NOT insert any sheets of paper into the paper support… – that are wet, have been edited with correction fluid, are soiled or have a coated surface.
– that are held together with office or notebook staples or with tape or glue.
– that are pasted with note paper.
– that are creased, crumpled or torn
– that are curled.

3 Insert the paper into the paper support. You can load up to 60 plain paper sheets (20 lb. or 75 g/m2). Slide the paper guide firmly against the edge of the paper.
2

0.08 inches (2 mm) or more
Forms from a Laser Printer! · Forms that have been printed out by a laser printer are not suitable for further printing.
Note(s)
Curled Paper · If paper is curled, use it after flattening paper. 0.08 inches (2 mm) or more curl may cause paper jam.
Storing Paper · To avoid curling, when you do not use the unit, unused paper is put into package, please keep it in a flat state. And also, store it avoiding heat, humidity, and direct sunlight.

English

Continued on next page.

4 Open the paper exit tray and exit tray extender.

Loading Pre-printed Material
· If you would like to print on an input sheet (for example, forms or stationery), place the input sheet with the Pre-printed side facing forward in the paper support.

C CAUTION
Forms from a Laser Printer!
· Forms that have been printed out by a laser printer are not suitable for further printing.

Note(s)
Loading Envelopes · Insert the envelopes into the paper support. You can load up to 5 envelopes. Place the envelopes with the non-printed side facing forward in the paper support.

Child Safety · DO NOT pull out the paper support swiftly, otherwise the tray
may fall resulting in injury.
5 Make sure the inserted paper format and paper type matches the printer settings.
» Refer to “Print settings” on page 26.

C CAUTION · DO NOT reverse the direction when loading envelopes.

English

Print settings
Confirming Printing Preferences for Windows®
Note(s) Microsoft® Windows® Screenshots
· The screen shots in this guide were made with Windows® 10. If you use Windows® OS other than Windows® 10, the screen interfaces look slightly different. The functions, however, are the same.
· Edit print settings When you print a document, the [Print] dialog box appears. Select [VERITE 55W Eco /VERITE 55 Eco] (this unit) and click on [Properties] or [Preferences] and such. The changes to the settings only apply to a print job of the respective application and only until this application is closed.
· Select default print setting on the Quick menu You can adjust the default print settings using the [Quick] menu. Click on [Start] > [Settings] > [Devices] > [Devices and printers]. Right click on the name of the unit and select [Printer properties]. Click on [Preferences…] in the [General] tab.
Quick After you have selected one of the default settings you want to change the selection will be saved when you click [X] to close the [Quick] menu window.
· Edit detailed print setting on the Details menu
Click [Details] on the top right corner if you want to change specific detailed settings.

Change to ECO Mode: You can easily use less Ink.

[ ] [] []

ECO mode is not effective.
ECO mode is effective for saving 20% ink.
ECO mode is effective for saving 20% ink and reducing 12% printed area.

· For more details, refer to “ECO mode” on page 19.
Copies:
Enter the number of copies you would like to print. Activate [Collate], if you would like to print the copies sorted and not have all the copies of one page behind each other in succession. Activate [Reverse page order], if you would like to change the print order to print the last page of your document first.

Paper size: Select the format of the document.

· Letter (8 1/2 x 11 in) Letter Borderless
· Legal (8 1/2 x 14 in ) · Executive (7 1/4 x 10 1/2 in) · Statement (5 1/2 x 8 1/2 in) · A4 (210 x 297 mm)
A4 Borderless · JIS B5 (182 x 257 mm) · A5 (148 x 210 mm)
A5 Borderless · A6 (105 x 148 mm)
A6 Borderless

· Postcard (4 x 6 in.) Postcard (4 x 6 in.) Borderless
· Index Card (3 x 5 in.) · 5×7 in.(2L) (127 x 178 mm)
5×7 in.(2L) Borderless · 3.5×5 in.(L) (89 x 127mm)
3.5×5 in.(L) Borderless · Hagaki (100 x 148 mm)
Hagaki Borderless · Envelope #10 (4 1/8 x 9 1/2 in) · Envelope DL (110 x 220mm) · Envelope C5 (162 x 229mm)

Adjusting this setting in the print settings of each application is the best option as many programs overwrite the settings of the printer driver.
You can also create, edit or delete to manage custom paper size by selecting [Manage Custom Sizes…].
[ Select the print settings automatically according to the paper size.] can be selected depend on the paper size.

Color Output:

Select print output for [Color] or [Black and white].

[Color]

Color print

[Black and white] Black-and-white print

Paper type: Select the desired paper type. Ensure that the selected paper size is used.

Print Quality:
Select the Quality settings to match the document type to be printed. You can select the type of Print Quality [Auto/Draft/Normal/Best].

[Auto (default)] [Draft] [Normal] [Best]

Printing with a quality suitable for the paper type that is selected.
High-speed printing, but low image quality.
Standard speed printing and image quality.
Highest quality image, but printing speed is low.

Sharpen: Adds sharpness to the image.

[On]

Activates Sharpen.

[Off]

Deactivates Sharpen.

English

Collate:
The Collate feature controls the order of printed pages when printing multiple copies of a document. For example, if you are printing two copies of a five- page document, then the page order of the collated output would be 1, 2, 3, 4, 5, 1, 2, 3, 4, 5. The page order of the noncollated output would be 1, 1, 2, 2, 3, 3, 4, 4, 5, 5.

[On]

Activates Collate

[Off]

Deactivates Collate

Continued on next page.

Reverse page order: [On] [Off]

Print from the last page. Print from the first page.

Page Orientation:
This function allows you to select the direction of printing on a page. You can set whether to print in Portrait or Landscape format. Adjusting this setting in the print settings of the application is the best option as many programs overwrite the settings of the printer driver.

[Portrait] [Landscape]

Portrait indicates vertical orientation, where the page is taller than it is wide.
Landscape indicates horizontal orientation, where the page is wider than it is tall.

Resizing Options: If you would like to resize the printing document, click on [On].

[On] [Off]

Resizes the printing document to the selected paper size.
Does not resizes. Keep the document size.

Print on both sides (Duplex):
You can select whether to print on one side only or manually print on both sides.

[On] [Off]

Prints manually on both sides. Prints on one side.

Note(s)

When [Print on both sides] is set to On.

· When “Manually print on both sides” is selected for two-sided printing, this unit will operate as follows:

1. Odd pages will be printed.

2. After completion of odd page printing, an instruction sheet will be printed. There is no notification on the PC for this. Follow the instructions on the printed sheet. After the instruction sheet is printed, you must manually turn the stack of printed pages over and place them in the paper support. Before placing the pages with the front printed sides in the paper support, make sure of the following items to avoid a paper jam or double-feed:

All other paper (unused paper) has been removed from the paper support.
The ink is completely dry.
The paper is not curled or creased. If it is, flatten the paper.
Align the corners of the paper.
A paper jam or double-feed may occur if the paper is in a bad condition or the printed page is placed incorrectly.
Maximum number of sheets by paper type:

Plain paper (20 lb.): 30 sheets (60 pages)

Postcard:

15 sheets

3. After 30 seconds, even-numbered pages will automatically be printed.

Because the default setting is [Reverse page order], for an even-numbered document, odd-numbered pages will be printed after even-numbered pages are printed.

Page Layouts: [Normal] [Multiple pages per side (N-Up)] [Poster] [Mirror]

Prints the Normal printing.
Prints Multiple pages on one side of a paper for the page layout.
Prints a document in a larger format. The Poster option lets you enlarge a print job to several times the standard size.
Prints a horizontally flipped document

Note(s)

When [Poster] is selected.
· Depending on the poster size that you select, your document is divided into an equal number of sections, each of which prints on a full sheet of paper. When all sections have printed, you can trim the extra white space around each page and join the individual sheets to create a poster. Supported size of poster – 2 x 2 (4 pages), 3 x 3 (9 pages), or 4 x 4 (16 pages).

Watermark:
You can choose a watermark from three modes. (Same watermark on all pages, a different watermark on first page, or a different watermark on odd/even pages.) Select a watermark that you would like to add to your print job.

[Use the same watermark on all pages]

· (None) · Confidential · Draft

· Username. · Date and Time

[First page] You can choose the same selection above ([(None)] to [Date and Time]) on the first page. [Other pages] You can choose the same selection above ([(None)] to [Date and Time]) on the other pages.

To add or remove watermark, click on [Edit Watermarks].

· Save Detail changes Click on [Save] on the [Details] settings in the top left corner to save the changes to the respective register.
The saved configuration information will be managed by names. You can type the substitute name for [Custom 1] when [Save Print Settings] windows appears.
Click on [Quick] or [X] to close the [Details] settings window without saving.
· Delete Custom settings You can delete custom settings by Quick menu. Select the one of the registered settings, then click [Delete].

English

Continued on next page.

Confirming Print Settings for Mac
Note(s)
Macintosh Screenshots · The screen shots in this guide were made with the Preview (Applications) of OS X 10.11. If you use another version of OS X or another application, the screen interfaces look slightly different. The functions, however, are the same.

· Save changes
1 Click on [Presets] list box, and select [Save Current Settings as Preset…]. The saved configuration information will be managed by names.
2 Input name in [Preset Name:] textbox, then select [Preset Available For:] radio button.
3 Click on [OK] to save and close the window.
4 Select [Cancel] to close window without saving.
· Load settings · You can access the saved settings quickly by selecting a name from [Show Presets…] in [Presets] list box.
· Change Print options · In the Print Setting menu, select the Print options you want to change in the red frame below.

Paper Size: Select the format of the document. Adjusting this setting in the print settings of each application is the best option as many programs overwrite the settings of the printer driver. You can also create and manage custom paper size by selecting [Manage Custom Sizes…].
Orientation: Choose Portrait or Landscape output.
· Edit Print Settings for a print job When you print a document, follow the Steps below.
1 Open the file you want to print.
2 Select [File] on the menu bar.
3 Select [Print…], then the Printer Setting menu will be displayed.
4 If details are not displayed, select [Show Details] on the bottom of the Print Menu. You can edit Print Settings when details are displayed.

Preview
Auto Rotate: Automatically selects portrait or landscape.
Scale: Enter the scaling ratio.
Scale to Fit: Input the scaling ratio of [Print Entire Image] or [Fill Entire Paper] automatically.
Copies per page(s): Print multiple copies of the page(s).

English

Continued on next page.

· Layout

· Cover Page If necessary, you can print the cover page.

Pages per Sheet: Print multiple pages on one sheet.
Layout Direction: If you print multiple pages on a sheet, select the layout direction.
Border: Print the border on the sheet. Reverse page orientation: If you would like to reverse page orientation, select the checkbox.
Flip horizontally: If you would like to flip horizontally, select the checkbox.
· Paper Handling

Print Cover Page: If you would like to print the cover page, select [Before document] or [After document].
Cover Page Type: If you would like to print the cover page, select the cover page type.
· Quality & Media

Pages to Print: If you would like to print odd/even pages only, select [Odd only] or [Even only].
Page Order: If you would like to print in reverse order, select [Reverse].
Scale to fit paper size: If you would like to scale to fit your printer paper, select the checkbox and select [Destination Paper Size].
Destination Paper Size: Select the paper size to scale.
Scale down only: If you don’t want to scale up, select the checkbox.

Print Quality: Select the Quality settings to match the document type to be printed. You can select the type of Print Quality [Auto/Draft/ Normal/Best].
[Auto] Printing with a quality suitable for the paper type that is selected.
[Draft] High-speed printing, but low image quality. [Normal] Standard speed printing and image quality. [Best] Highest quality image, but printing speed is low.
Paper Type: Select the desired Paper Type. Ensure that the selected paper size is used.
Sharpen: Activate Sharpen, if you would like to add sharpness to the image.
· Advanced Options Color Output: Select print output from [Color] or [Black and White].

English

Continued on next page.

Making copies

The copy function is available using

on the unit.

1 Lift the scanner lid on the unit.

2 Load the original print side down on the scanner glass.

Copy Setting
Printing using the print application is available.
· Copies Set the number of Copies.

3 Close the scanner lid. 4 Specify the settings as necessary. 5 Press .

6 The unit will start copying.

· To cancel copy, press and hold

Direction of the copy
· Document is being copied as described above, printed copy comes out as shown below.

1 Select the number of copies [1] to [99]. Enter the number [1] to [99] directly in the box, or click [+] to increase the number of copies or [-] to decrease the number of Copies.

2 Click [Copy] or press

· Color Set the copy Color setting.

1 Click [Document Color] or [Black and White], or choose from pull-down menu.

· Color

· Black/White

· Quality Set the copy Quality from pull-down menu.

· Text · Text/Photo

· Photo · Draft

English

Continued on next page.

· Paper Size Set the Paper Size for the copy document from pull-down menu.

· Letter · Legal · Executive · Statement · A4 · JIS B5 · A5 · A6

· Postcard (4 x 6 in.) · Index Card (3 x 5 in.) · 5×7 in. (2L) · 3.5×5 in. (L) · Hagaki · Envelope #10 · Envelope DL · Envelope C5

· Paper Type Set the Paper Type from pull-down menu.

· Plain · Labels · Envelope

· Glossy Photo · Matte Photo

· Brightness Set the level of Brightness. Adjust the slider to the right to get brighter and to the left to get darker.
· Resize Set the Resize for enlarging or compressing the copy document from pull-down menu. · 100% Default · 130% Letter->Legal · 104% Executive->Letter · 97% Letter->A4 · 93% A4->Letter · 85% Letter->Executive · Custom*

You can select custom Resize range from 25% to 400%. Enter the number [1] to [99] directly in the box, click [+] or [-] to select the Resize value. The default value is 100%.

C CAUTION
· [Resize] and Pages per Side can never be set at the same time. If either setting is set, another one will be reset to the [Resize]: [100%] or [Pages per Side]: [One].

· Pages per Side You can copy multiple pages on one sheet by printing smaller images of each page.

1 Lift the scanner lid on the unit.

2 Load the original print side down on the scanner glass.

3 Close the scanner lid.

4 Click either printing option

· One · 2 in 1 Portrait · 2 in 1 Landscape

· 4 in 1 Portrait · 4 in 1 Landscape

2 in 1 Portrait 2 in 1 Landscape 4 in 1 Portrait 4 in 1 Landscape

5 Click [Copy] or press

6 Remove the first page from the scanner glass and place the next page.

7 Click [Copy] or press

to continue to scan the next page.

Repeat this until you have scanned all the pages.

C CAUTION · [Resize] and Pages per Side can never be set at the same time. If either setting is set, another one will be reset to the [Resize]: [100%] or

· ID Card Copy You can copy both sides of a small document (e.g. ID card, business card) onto one page.

Note(s)

· This function is valid only with Letter or A4 size paper.

1 Click [Start ID Card Copy].

2 Load plain Letter or A4 size paper on the paper support. 3 Lift the scanner lid on the unit.

4 Load the front side of the ID card facedown on the scanner glass in

the left rear placement corner with arrows and then Click [Copy] or

press

, then Copying process will start.

5 Lift the scanner lid on the unit, flip ID card over and click [Copy] or

press

Note(s)

· If you have changed the Paper Settings in the Setup Menu, the default value of Paper Settings in the Copy Menu will also be changed.

English

Scanner
You can use a variety of scanner functions from your smartphone/tablet or PC. The “Scanning” application is available if your PC has a Windows® platform.
The scanner function is also available by using an application called “Image Capture” bundled as a default for Mac.
Or the mobile App for AndroidTM and iOS. For information on the mobile App, refer to “Print using your smartphone/tablet” on page 20.
Note(s)
· You cannot use the scan function directly with this unit.
· Load the original print side down on the scanner glass. Make sure to align the original print to the left rear corner of the scanner glass with arrow marks.

File Format: Select the File Format from below:

· JPEG

· PDF

Paper Size: Select the Paper Size from below:

· Letter · Executive · Statement · A4 · B5(JIS) · A5 · A6 · 4×6 in.(Postcard/KG)

· 3×5 in.(Index Card) · 2L(5×7 in.) · L(3.5×5 in.) · Hagaki · Envelope #10 · Envelope DL · Envelope C5 · Entirely

Resolution (dpi): Select the scan Resolution from below:

· 75 dpi · 100 dpi

· 150 dpi · 200 dpi

· 300 dpi · 600 dpi

· 1200 dpi

· The readable area of the scanner is not equal to the area of the scanner glass. Therefore, when placing the document in the left rear corner of the scanner the edges of the document may not be scanned.
· 0.079 inch (2 mm) missing in the short side, and 0.024 inch (0.6 mm) missing in the long side of the scan area.
Scan in [Scanning] application by Windows®
Run [Scanning] from the [Start] menu as it appears in the window below.

Note(s)

· Scanning at 1200 dpi or more is available on the “High Resolution Scanning” application included with the Software.

Color Depth: Select the scan Color Depth from below:

· Gray

· Black & white

· Color

Content Type: Specify the Content Type of the scan document from below:

· Text

· Text/Graphics · Photo

Scan: Starts Scan.
Brightness: Select the Brightness level. Adjust the bar toward the left end to set the reproduction darker. Adjust the bar toward the right end to set the reproduction lighter. The Brightness level will be reflected on the scanned data.
Contrast: Select the Contrast level. Adjust the bar toward the left end to reduce the Contrast. Adjust the bar toward the right end to increase the Contrast. The contrast level will be reflected on the scanned data.
Background Removal: Select Background Removal to remove the background on the scan data. The Background Removal feature adjusts the amount of background that is visible on the scanned data.

Click [Scan] and will start the scanning.

Settings If you would like to change the settings, click [Details].

English

Continued on next page.

Scan in Mac
Run the Image Capture application. (Scanning with other applications such as “Preview” is a very similar process.)
· Simplified scan mode In the “Simplified” scanner interface, follow these Steps:
1 Place the document you would like to scan on the scanner glass. 2 Open Image Capture located in the Applications folder. 3 Select this unit from list of devices. 4 Select the desired destination where the scanned document is
to be saved from the [Scan To] pop-up menu. 5 Click [Scan] to scan. 6 A preview will appear on your monitor when scanning is
completed.

· Advanced scanning options In the “simplified” scanner interface, click [Show Details] if you want to enter a detailed scan mode with more advanced options.

Kind: Select the scan Color depth from below:

· Color

· Black & White

· Text

Choose “Color” to scan an object in Color.
Choose “Black & White” to scan an object in Grayscale (256 or Thousands of grays).
Choose “Text” to scan text documents.

Resolution: Select the scan Resolution from below:

· 75 dpi · 100 dpi

· 150 dpi · 200 dpi

· 300 dpi · 600 dpi

· 1200 dpi

Select the [Use Custom Size] checkbox to enable the [Size] fields to specify the width and height you want to scan. Select pixels, inches or cm (centimeters).

Rotation Angle: Set the number of degrees for the clockwise rotation of your scanned image.
Auto Selection: Choose one of the following from the [Auto selection] pop-up menu.

[Off] [Detect Separate Items] [Detect Enclosing Box]

to normally select the object. to automatically select and
straighten the objects you are
scanning. to include all the items on the
scanner bed in one image.

Scan To:
Select the desired destination where the scanned document is to be saved.

Name:
Enter the name of scanned images. For multiple scans, the name entered will be a part of incrementally named scans. For example, enter “doc”, and the names of the scanned images will be “doc1.jpeg”, “doc2.jpeg”, and so forth.

Format: Select the image format of the scan from below:

Color

· JPEG · PDF · BMP

· PNG · TIFF

Black & White
· JPEG · PDF

· PNG · TIFF

Text
· JPEG · PNG

· TIFF

Image Correction:
When [Manual] is selected, the adjustment of the following parameters are possible.

English

Continued on next page.

Document Type: Select the type of document to be scanned from below:

· Text Only

· Photo

· Mixed Graphics

When choosing [Color] in [Kind:] [Brightness] [Tint] [Temperature] [Saturation]

to adjust the balance between light and dark. to adjust the Color balance between red and
green. to adjust the Color balance of warm and cool. to adjust the vividness of Colors.

When choosing [Black & White] in [Kind:] [Brightness] [Contrast]

to adjust the balance between light and dark. to adjust the balance of sharpness and
softness.

When choosing [Text] in [Kind:] [Threshold] to adjust the transition point between dark and light.
Note(s) · Those images are created based on the screen of OS X 10.11. If the version of the OS is different or the OS is updated, it is possible that the display on the screen has changed.

English

Settings
You can set up the unit as you like depending on your needs. From the Start Menu, activate [Device Setting].

Device Sleep Time
You can set the time to go into Sleep mode.

2 Enter Password and click [Connect].
· IP Address
1 Click [IP Address].

1 Enter the number [1] to [120] directly or click [-] or [+] by minute.
Wi-Fi Setup
You can set the following Wi-Fi settings. Click [Wi-Fi Setup].

2 Select [Auto] or [IP Address].

[Auto] DHCP mode
It’s easy to Automatically get the IP address of this unit from the Network. [IP address] Static mode

Set the Network address manually

3 If you select [Manual], set the items below.

· IP Address

· Default Gateway

· Subnet Address · DNS Address

· Network and Password If you would like to connect to a router manually, follow the Steps below. 1 Click the SSID you would like to connect.

4 Click [Save].

English

Continued on next page.

· Proxy
1 Click [Proxy].

· Direct Connect Time
1 Click [Direct Connect Time].

2 Select [OFF] or [Proxy].

3 If you select [Proxy], set the items below.

· Address

· Port

4 Click [Save].
· Host Name
1 Click [Hostname].

Current Host Name is displayed. 2 If you would like to change it, enter Host Name.
3 After entering the Host Name, click [Save].

2 Select Direct Connect Time from pull-down menu.

· Disconnect · 5 min · 10 min

· 60 min · Unlimited

If you select [Unlimited], when the mobile is connected by Direct Mode until selecting [Disconnect] this unit remains in the Direct Mode.

If you select [Disconnect], the Direct Connection will be immediately terminated.

· Friendly name

1 Click [Friendly name].

2 Enter the name you would like. 3 After entering the Friendly Name, click [Save].

English

Continued on next page.

Google Cloud PrintTM
You can set the Google Cloud PrintTM settings. Click [Google cloud print].

· Register to Google Cloud PrintTM
1 Click [Register/Unregister].

· Status
1 The Google Cloud PrintTM connection (or registration) status, unit name, and unit description will be displayed.

2 Click [Start], then registration will start. The unit will print a registration URL for the Google Cloud PrintTM registration.

The following table shows the Google Cloud PrintTM service registration and connection status of this unit.

Status Not configured Disabled
Not connected
Connected
Disconnected
Registration in progress

Unit state
Unit is not registered to the Google Cloud PrintTM service. The Google Cloud PrintTM feature is not available.
The Google Cloud PrintTM service has been disabled. The Google Cloud PrintTM feature is not available. (Unit is registered in the Google Cloud PrintTM service.)
Unit is not connected from the Google Cloud PrintTM service. The Google Cloud PrintTM feature is not available. (Unit is registered in the Google Cloud PrintTM service.)
Unit is connected to use the Google Cloud PrintTM service. The Google Cloud PrintTM feature is available. (Unit is registered in the Google Cloud PrintTM service.)
Unit has been disconnected to use the Google Cloud PrintTM service. The Google Cloud PrintTM feature is not available. (Unit is registered in the Google Cloud PrintTM service.)
Registration is in process to use the Google Cloud PrintTM service. The Google Cloud PrintTM feature is not available. Registration should complete, please wait.

Note(s) · Load plain Letter or A4 -size paper.
3 Access that registration URL within 14 minutes and follow its instructions.
· Enable/Disable
1 Click [Enable/Disable].

2 Select [Enable] or [Disable].

Select Action Register Unregister Enable Disable

Action Register to Google Cloud PrintTM Unregister from Google Cloud PrintTM Enable Google Cloud PrintTM Disable Google Cloud PrintTM

English

Continued on next page.

AirPrint
Enable or disable the AirPrint function. 1 Select [Enable] or [Disable].

Printer Utility
You can perform maintenance operations. Click [Printer Utility].

Software update
You can update your printer’s Software. 1 Click [Update Now], then automatically starts updating.

· Clean Printhead
1 Load plain Letter or A4 -size paper.
2 Click [Clean Print Head].

Once you check , the server will receive your printer’s data.

3 A page prints, forcing ink through the ink cartridge nozzles to clean them.
4 Print the document again to verify that the print quality has improved.

English

Continued on next page.

· Cartridge Setup Print the alignment pattern for alignment adjustment. By reading the pattern with the scanner, the printer alignment is optimized and the print quality will be better.
1 Load plain Letter or A4 -size paper.
2 Click [Cartridge Setup].

Please Finish the step 3 of 5

5 Open the scanner lid on the unit. Load the front side of the alignment pattern result facedown at the placement corner of the scanner glass (see below), then click [Next] to start the alignment adjustment after closing the scanner lid.

3 Click [Start].

6 The unit will start scanning the alignment pattern to set an appropriate alignment on this unit.
7 When alignment is completed, [End Cartridge setup] message will be displayed on the PC screen.

Please Finish the step 3 of 5

4 The unit will start printing the alignment pattern.

· The

(Power) LED will light up then blink rapidly. LED lighting

pattern is “Blinking 6”

» Refer to “Meaning of LED behavior and lights” on page 9.

English

Continued on next page.

· Print Reports Print out the configuration information. 1 Click [Print Reports]. 2 Click [Start] to start printing the configuration report.

· Paper Setup Sets the paper type and paper size. Note(s)
· If you change the following Paper Settings, the default paper setting values in the Copy Menu will also be changed.
· This setting will also affect the AirPrint paper size setting.
Click [Paper Setup].

Configuration Report
· Restore Factory Default All of the unit settings will be reset to the factory default. 1 Click [Restore Factory Default].

· Paper Size Set the Paper Size for the copy document.

1 Select the Paper Size from pull-down menu.

· Letter · Legal · Executive · Statement · A4 · JIS B5 · A5 · A6

· Postcard(4 x 6 in.) · Index Card(3 x 5 in.) · 5 x 7 in. (2L) · 3.5 x 5 in. (L) · Hagaki · Envelope #10 · Envelope DL · Envelope C5

· Paper Type

1 Select the Paper Type from pull-down menu.

· Plain · Labels · Envelope

· Glossy Photo · Matte Photo

2 Click [Restore].
· If you choose [Restore], all settings will be restored to factory defaults and the unit will restart.

3 Click [Restore Factory Default]. English

Web interface
The Web interface is available to you on all operating systems. You can access the web interface with an Internet browser on your PC and conduct many different settings to your unit.
You can access the Web interface if the unit is connected to a Network via Wireless Connection.

Note(s)
· Before you start, make sure your PC and the unit are connected to the SAME NETWORK.
· When the unit is connected to the Network, the (Wireless) LED lights up.

Confirming the IP Address
You will need the current IP address of the unit in order to access the Web interface. You can verify the IP address by printing out the Configuration Report.
» Refer to “Print Reports” on page 40.

Configuration Report
Device Information Model Name Serial Number Software Version
Device Statistics Information Printed Page Scanned Page
Supply Information Black Cartridge Cartridge Status Cartridge Type Ink Level Color Cartridge Cartridge Status Cartridge Type Ink Level
Device Configuration Language Default Paper Size Default Paper Type Sleep Time-out EWS Access path
Network Information

EWS Access path

[2016-07-04 07:42:39(UTC)] KODAK VERITE 55 Eco XXXXXXXXXXXXXXXX X.XX.XXX (XXXXXXXX)
44 65
Installed XXL 43%
Installed XXL 75 %
English Letter Plain 10 min http://xxx.xxx.xxx.xxx
http://xxx.xxx.xxx.xxx
Unit’s IP address

Calling the Web interface
For the first time use, you will need to set the Password to get the entire features on the Web interface. After you have set the Password, you do not need to set the Password anymore.
1 Start an Internet browser on a PC, which is connected to the Network.
Note(s)
Suitable Internet browser · We recommend the following Internet browser. Windows®: Internet Explorer® (version 8.0 or above) Mac: Safari (version 1.3 or above)
2 Enter the IP address of the unit into the address bar of the browser.

http://xxx.xxx.xxx.xxx

Unit’s IP address

3 The following screen will be displayed.

Click on the item to check the information or change its settings.
The printer’s status is displayed here. [Ready / Busy / Status message] More details on Status messages and how to correct problems can be found under “Status messages and
» LED behaviors”. Refer to “Status messages and LED behaviors” on page 53.
Changes the display language. After selecting the language, click on [Accept]. Input “admin” into the “Password” field, then click on [Login] » then, create the Password as you like. Refer to “Login Password” on page 44.

English

Continued on next page.

Device Status
You can check the status of the unit, such as remaining ink level.

· Enable Wi-Fi

Device Configuration
· General Settings You can change the following items.
· Default paper size/type If you change this setting, the default paper size/type in Copy Menu setting are also changed.
· Sleep mode time You can change the time required before unit enters Sleep mode from [1 min/10 min/20 min/30 min/40 min/50 min/60 min/70 min/80 min/90 min/100 min/110 min/120 min].
· Print Reports You can print out the configuration report.
· Factory Reset You can restore the default settings to the unit.
Note(s)
· The unit will automatically restart after reset to factory settings. (The Web Interface will be disconnected.)

You can turn On / Off the Wireless function.

Note(s)
· Even if the Wireless function is set to Off, when you connect by Easy Simple Print, the Wireless function will be valid.
· When you have connected the unit to the access point/router, if you set to disable Wi-Fi, you will not be able to operate from the Web Interface. If you connect to Wi-Fi again,

press

(Wireless).

· TCP/IP (IPv4) Settings

Network

You can change the IP source / IP address or the like.
Note(s) · The initial value of the IP Source of Wireless is DHCP.
· IPv6 Settings This unit supports IPv6 in order to support AirPrint. You can check the information on IPv6.

If necessary, you can confirm or set the state of the Network. If you are not familiar with Network management, use the default settings.

Note(s)

· Be careful if you want to assign the IP address manually. If the IP address you entered is not correct, you will not be able to connect to the unit. When you cannot connect to the unit after a configuration change, please reset the unit.
» Refer to “Restore Factory Default” on page 40.
· When the connection of the unit is changed, the Web interface will be disconnected. If necessary, reconnect the Web interface.

English

Continued on next page.

· Wireless LAN Settings

· Google Cloud PrintTM You can set the Google Cloud PrintTM settings.

· You can change connection settings by setting the SSID / Security / Password for Wireless Connection.
· Proxy Settings
· You can connect to Internet through a proxy server.
Mobile
· AirPrint You can AirPrint Settings. » Refer to “AirPrint” on page 22 for more information. Note(s)
· When you select [Certificate Installation] or [Certificate Request Generate], you can set the encrypted communication.
AirPrint Configuration You can turn On/Off the AirPrint function. If set to On, you can print using the AirPrint.

· Registration and connection status of Google Cloud PrintTM will be shown. More information can be found under “Google Cloud PrintTM”.
» Refer to “Google Cloud PrintTM” on page 37 for more information.
· The printer name and its information are displayed when you are using Google Cloud PrintTM.
Action You can set the following for the Google Cloud PrintTM setting.
After you select the Action, click on [Accept].

Select Action Register to Google Cloud Print Disable Cloud Print Suspend Cloud Print Enable Cloud Print Resume Cloud Print Unregister from Google Register Cancel
Set XMPP Ping Interval

Action Register to Google Cloud PrintTM
Disable Google Cloud PrintTM Suspend Google Cloud PrintTM Enable Google Cloud PrintTM Resume Google Cloud PrintTM Unregister from the Google Cloud PrintTM Cancel the Google Cloud PrintTM registration Set the interval time to communicate with the Google Cloud PrintTM service.

*Usually, set the XMPP ping interval to 5 minutes (default).
To change this setting, select [Set XMPP Ping Interval] in [Select Action] and choose the communication interval from 1 minute to 10 minutes.

Note(s)
· When you select [Register to Google Cloud Print], then ensure plain Letter or A4-size paper is loaded.

Order Supplies
If you would like to purchase consumable material, visit the following website at www.kodakverite.com/support

· The printer name (Friendly Name) and its information are displayed when you are using AirPrint.

English

Continued on next page.

Software Update
· If the Software Update for this unit is available, the Update button is displayed. Press it and start to update the Software.
· When the Software is the latest version, the Update button is not displayed.
Login Password
· Once you have logged in to the Web interface with “admin”, it is recommended that you change the Password.
Note(s) · Record the Password in case you forget it. · If you have forgotten the Password, you can perform [Restore Factory Default] to reset all settings, including the Password, to their factory default. After resetting the unit, you can login with the default Password “admin”. · Passwords may only contain alphanumeric characters, and are from 1 to 32 characters in length. · The default Password “admin” provides you with full access to all setup functions, but can allow access by an unauthorized third party. It is recommended that you change the Password.

English

Service
Note(s) · If any problems occur, please see the notifications on the Status Messenger (Windows®).
» Refer to “Status Messenger for Windows®” on page 23.
Checking ink levels
Using PC
» Refer to “Status Messenger for Windows®” on page 23.

3 Remove the cartridges.
Black

Color

Slid

4 Remove the Black and Color Ink cartridges from the packaging.

Changing the ink cartridge

BLACK

COLOR

C CAUTION Use Original Consumable Materials!
· Use only original consumable materials. These are available from a specialized retailer or through our order service. Other consumable materials can cause damage to the unit.
Observe Packaging Instructions · Follow the instructions on the packaging of the consumable materials.
1 Open the unit by lifting the Ink door.
DO NOT Open During a Print Job!
· Never open the Ink door while printing.

Black

Color

5 Remove the plastic tape on the Black and Color Ink cartridges using the red pull tab.

DO NOT TOUCH
· DO NOT TOUCH the gold contact area on the back or the metal nozzles on the bottom of the Cartridge.

6 Set the Color Ink cartridge all the way into the slot on the right side. 2
1 Color(Right)

2 Press outside blue Cartridge tab to open the Cartridge slot.

Press!

1XL

2 XL

Slid
2 Black(Left)
Slid
7 Set the Black Ink cartridge all the way into the slot on the left side.

English

Continued on next page.

8 Push and click the center green Cartridge tab to close the slot until the cover snaps securely into position.
Click !
9 Close the Ink door.

Ordering supplies

If you would like to purchase consumable material, visit the following website at www.kodakverite.com

· Ordering ink cartridges Item

Part Name BLACK

Verité 5 Black Cartridge

XL BLACK XXL BLACK

3XL BLACK

COLOR

Verité 5 Color Cartridge

XL COLOR XXL COLOR

3XL COLOR

Verité 5 Combo Cartridge

XL COMBO 3XL COMBO

C CAUTION Ink Cartridge Not Inserted Correctly!
· If the Ink door does not close properly, the Ink cartridges are not inserted correctly. Remove the Ink cartridges and then insert them again correctly.
Green
DO NOT PUSH the green/blue parts at the same time.

Note(s)
· For page yield information, visit www.kodakverite.com/support · The cartridges used for printing documents can also be used for
printing photos. · For best results, use only genuine KODAK VERITÉ Ink Cartridges.
Using genuine KODAK VERITÉ Ink Cartridges KODAK VERITÉ Ink Cartridges are designed to perform for superior print quality, and our inks are formulated to work with the unit and help extend the life of your product. We recommend that you use only genuine KODAK VERITÉ Ink Cartridges sold by Funai Corporation, Inc. Funai’s warranty does not cover damage caused by non-KODAK VERITÉ Ink or Ink Cartridges.

Fixing a paper jam

Blue

· Clearing paper jam in the unit

Note(s)

· The Parts inside the unit are Sensitive. Avoid unnecessarily touching Parts while Clearing Jams.

1 Check the paper support or the paper exit tray for jammed paper. 2 Firmly grasp the paper, and then gently pull it out.

Note(s)

· Be careful not to tear the paper while removing it.

English

3 Press and hold (Power/Standby) to cancel the rest of the print job.

Continued on next page.

Restoring the factory settings
You can restore the default settings on the unit using the web interface.
» Refer to “Restore Factory Default” on page 40.
Power cycling
» Refer to “Troubleshooting” on page 49.
If a problem occurs that cannot be corrected with the instructions in “Troubleshooting”, follow the Steps given here.
1 Pull out the AC plug. 2 Wait at least 30 seconds, then connect the AC plug back into the
AC outlet. 3 Follow the instructions on the display and in the error report. If the
problem repeats, visit the following website at www.kodakverite.com/support

Cleaning the ink cartridge nozzles and contacts
1 Remove the ink cartridge(s). 2 Dampen a clean, lint-free soft cloth with water, and then place the
cloth on a flat surface. 3 Gently hold the nozzles against the cloth for about 3 seconds, and
then wipe in the direction shown.
e.g.) Verité 5 Color Cartridge XL COLOR
4 Using another clean section of the cloth, gently hold the cloth against the contacts for about 3 seconds, and then wipe in the direction shown.

e.g.) Verité 5 Color Cartridge XL COLOR
5 With another clean section of the cloth, repeat Step 3 and Step 4, and then let the nozzles and contacts dry completely.
6 Reinsert the ink cartridge(s), and then print the document again. 7 If the print quality does not improve, clean the print nozzles, and
then try printing the document again. 8 Repeat Step 7 up to two more times. 9 If print quality is still not satisfactory, replace the ink cartridge(s).

English

Continued on next page.

Preserving the ink cartridges
· Keep new ink cartridges in their packaging until you are ready to install them.
· DO NOT remove an ink cartridge from the unit except to replace, clean, or store it in an airtight container. The cartridges do not print correctly if left exposed for an extended period of time.
C CAUTION Refilling ink cartridges
· The warranty does not cover repair of failures or damage caused by a refilled ink cartridge.
· KODAK does not recommend use of a refilled ink cartridge. · Refilling an ink cartridge can affect print quality and may
cause damage to the unit. · For the best results, use KODAK Supplies.
Warning – Drying out of the Printheads: · DO NOT move the Ink Cartridge Holder by hand. If you move the Cartridge Holder to the left the printhead Cover Caps will not protect the Printheads from Drying out.
Cleaning the scanner glass
1 Dampen a clean, lint-free soft cloth with water. 2 Gently wipe the scanner glass clean. 3 Use a dry lint-free soft cloth to wipe the moisture left over.
Note(s)
· Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.

Cleaning the exterior of the unit
1 Make sure that the unit is turned Off (Standby) and unplugged from the AC outlet.
SHOCK HAZARD · To avoid the risk of electric shock, disconnect the AC Power
cord from the AC outlet and disconnect all cables to the unit before proceeding.
2 Remove paper from the paper support and paper exit tray. 3 Dampen a clean, lint-free soft cloth with water.
C CAUTION Warning – Potential Damage:
· DO NOT use household cleaners or detergents, as they may damage the finish on the unit.
4 Wipe only the outside of the unit, making sure to remove any ink residue that has accumulated on the paper exit tray.
C CAUTION Warning – Potential Damage:
· Using a damp cloth to clean the interior may cause damage to your unit.
5 Make sure the paper support and paper exit tray are dry before beginning a new print job.
Periodic maintenance is required
The unit will automatically clean the nozzle itself regularly to keep an appropriate print quality. This maintenance begins automatically even when the unit is in Sleep mode.

Important Notice Regarding Printheads
This unit automatically protects the printhead (caps) on each ink cartridge in order to prevent the printheads from drying. This function is only performed in Power-Off (Standby) mode when pressing (Power/Standby) button. DO NOT Unplug the AC Power cord from the AC outlet to shut down the unit or move the ink cartridge access holder after the unit was shut down. Failure to do so may result in Clogging of the Printhead Nozzles.

English

Troubleshooting
You can correct most problems by yourself. If you need additional help, the KODAK Solutions Center offers the most up-to-date driver, manuals, the latest FAQs and troubleshooting tips. Visit our website at www.kodakverite.com/support
Setup troubleshooting

Power/Standby button is not lit

· Press (Power/Standby) Make sure the unit is on by pressing (Power/Standby).
· Disconnect and reconnect the AC plug 1 Disconnect the AC plug from the AC outlet for 30 sec. 2 Connect the AC plug to an AC outlet that other electrical devices have been using or check this outlet with another device.

Software did not install

3 If the

(Power) LED is not lit, press (Power/Standby).

If you encountered problems while installing, or if the unit does not appear in the list in the printers folder or as the unit option when sending a print job, you can try uninstalling and reinstalling the Software.

Make sure your operating system is supported The following operating systems are supported:

Microsoft® Windows®

OS Version

Processor

Browser

USB port

Windows® 10 Windows® 8.1 Windows® 8 Windows® 7

Windows® Server 2012

Microsoft

Windows® Server 2008 Windows® Vista

32-bit (x86) or 64-bit (x64)

Edge (Only Windows 10),
Internet

USB 2.0 High Speed or Full Speed

Explorer®

Apple Mac OS

OS Version

OS X v10.11 (El Capitan)

OS X v10.9 (Mavericks)

OS X v10.10 (Yosemite)

OS X v10.8 (Mountain Lion)

Processor
Intel® CoreTM Processor

Browser

USB port

Safari

USB 2.0 High Speed or Full Speed

Linux OS Version

Debian 8.0

Ubuntu 14.04 LTS

Processor
700MHz (about Intel® CeleronTM
or better)

Browser Firefox

USB port
USB 2.0 High Speed or Full Speed

Check that your computer meets the minimum system requirements listed on the printer box.

· Check the USB connection 1 Check the USB cable for any obvious damage. If the cable is damaged, use a new one.
2 Firmly plug the square end of the USB cable into the back of the unit.
3 Firmly plug the rectangular end of the USB cable into the USB port of your PC. The USB port is marked with the USB symbol.
· Disconnect and Reconnect the Power Supply 1 Press (Power/Standby) to turn the unit Off (Standby). 2 Disconnect the AC plug from the AC outlet. 3 Connect the AC plug to the AC outlet. 4 Press (Power/Standby) to turn the unit On.
· Temporarily disable security programs in Windows®

1 Close all open programs. 2 Disable any security programs. 3 Double-click the downloaded installer file to extract it. 4 Follow the instructions on the computer screen to install the Software. 5 When the installation is completed, enable the security Software again.

English

Continued on next page.

Page does not print

· Check messages If an error message appears, then resolve the error before trying to print again.
· Check power

Print unexpectedly or it prints garbage data.

If the

(Power/Standby) LED is not On, then make sure that the AC Power cord is

properly connected to the unit and the AC plug is connected to a known working AC outlet

that other electrical devices have been using or check this outlet with another device.

· Remove and then reload paper

· Check ink Check the ink levels, and then install new ink cartridges if necessary.

· Check cartridges

1 Remove the ink cartridges.

2 Make sure the sticker and tape have been removed.

3 Reinsert the cartridges. · Check printer default and pause settings

Using Windows® 10 / 8.1 / 8 / 7 / Vista
1 From the Windows® start menu, click [Devices and Printers] (Windows® 7 / Vista), Right-click at the bottom left corner on your desktop, click [Control Panel], [Hardware and Sound] and [Devices and Printers] (Windows® 8), Right- click the Windows® start menu, click [Control Panel], [Hardware and Sound] and [Devices and Printers] (Windows® 10 / 8.1).
2 Either double-click the Icon for your unit or right-click the Icon for your unit and select See what’s printing to open the print queue.
3 On the menu, make sure there are no check marks next to Pause Printing or Use Printer Offline.
4 If you made any changes, try to print again. If a check mark does not appear next to Set As Default Printer, then you must select the unit for each file that you want to print.
· Disconnect and Reconnect Power Supply

1 Press (Power/Standby) to turn the unit Off (Standby).
2 Disconnect the AC plug from the AC outlet for 30 sec.
3 Connect the AC plug to the AC outlet.
4 Press (Power/Standby) to turn the unit On. · Remove and reinstall the Software
If you encountered problems while installing, or if the unit does not appear in the printers folder or as a printer option when sending a print job, then try uninstalling and reinstalling the Software.
· Make sure that the USB cable is not too long.
· Make sure that the USB cable is not damaged or broken.
· If you are using a USB interface-switching device, remove it. Connect your computer directly to your unit, and then try again.
· Make sure that you have chosen the correct printer driver to [Set as Default Printer].
· Make sure that this unit is not connected to the same port that is also connected to a storage device or scanner device. Remove all other devices and connect only this unit (printer) to this port.

English

Continued on next page.

Solving the power problems Removing and Reinstalling the Printer Software
Enabling the USB port in Windows®

· The unit and your PC cannot exchange data.
· Make sure the power supply is attached correctly to the unit
1 Press and hold (Power/Standby) to turn the unit Off (Standby). 2 Disconnect the AC plug from the AC outlet. 3 Wait 30 seconds and then reconnect the AC plug to the AC outlet. 4 Press (Power/Standby) to turn the unit On. · Make sure the unit is not in Sleep mode If the power light is blinking On and Off slowly, then the unit is in Sleep mode.
1 Disconnect the AC plug from the AC outlet. 2 Wait 30 seconds and then reconnect the AC plug to the AC outlet.
3 Press (Power/Standby) to turn the unit On. If the unit is not working properly, or if a communication error message appears when you try to use the unit, then you may need to remove and reinstall the Software.
Using Windows® 10 / 8.1 / 8 / 7 / Vista 1 Open All Programs or All apps.
Click [Start] button, Click [All Programs], and then select the printer Software folder “KODAK VERITE” from the list (Windows® 7 / Vista), Display [Start] screen, right-click for [All Apps] Icon to fade into the bottom right, click [All Apps], select the printer Software folder “KODAK VERITE” from the list (Windows® 8), Click [Start] button, Click [All Apps], and then select the printer Software folder “KODAK VERITE” from the list (Windows® 10 / 8.1).
2 Select Uninstall. 3 Follow the instructions on your PC screen to remove the printer Software. 4 Restart the PC before Reinstalling the printer Software. 5 Click Cancel on all New Hardware Found screens. 6 From your computer go to www.kodakverite.com/support and confirm that the
“DOWNLOADS” tab is selected.
7 Select the model [Verité 55W ECO / Verité 55 ECO] (this unit) from the pull- down menu of [Select Model Number].
8 Click “Drivers and Software” tab. 9 Click OS you use. 10 Click [PC Drivers & Software]. 11 Click the version number on the far-right.
» Refer to “Before you download the printer driver to your PC” on page 14.
· To confirm that the USB port is enabled on your PC:
Using Windows® 10 / 8.1 / 8 / 7 / Vista 1 Click [Start] button (Windows® 7 / Vista), Right-click at the bottom left corner on your desktop (Windows® 8), Right-click [Start] (Windows® 10 / 8.1 / 8).
2 Click Control panel > Hardware and Sound. 3 Under Devices and Printers, click Device Manager. 4 Double-click Universal Serial Bus Controller. If USB Host Controller and USB Root Hub are listed, then the USB port is enabled. For more information, see your PC documentation.

English

Continued on next page.

· Status Messenger Error Message appears » Refer to “Check print status from your PC” on page 23 and “Status messages and LED behaviors” on page 53.
· Paper handling » Refer to “Print media” on page 24 and “Status messages and LED behaviors” on page 53 (status message: Paper Jam).
· Pages are printed, but there are problems with: Print quality » Refer to “Improving the print quality” on page 58.
· Network problems
If you need additional help, the Funai Solutions Center offers the mostup-to- date driver, manuals, the latest FAQs and troubleshooting tips. Visit our website at www.kodakverite.com/support
· Alignment problems A failure notification will only be displayed on the App being used to print. Status Messenger will not notify if an alignment failure occurs.

English

Continued on next page.

Status messages and LED behaviors
The Status information will report problems with the unit. Take the proper action by referring to the following table.
» Refer to “Check print status from your PC” on page 23.

Black ink LED — indicated by

Color ink LED’s– indicated by

Paper jam LED — indicated by Wireless LED — indicated by

ECO LED

— indicated by

Power LED — indicated by

· LED lighting patterns

Blinking 1 Blinking 2 Blinking 3 Blinking 4

Lights up for 1 sec. No light for 1 sec. Lights up very rapidly No light for more than 1 sec. Blinking very rapidly 2 times No light for 1 sec. Blinking very slowly

Blinking 5 Blinking 6 Blinking 7 Blinking 8 Blinking 9

Blinking slowly Blinking rapidly Blinking very rapidly Blinking very rapidly 4 times No light for 2 sec. Blinking slowly (in Power-on mode)

Ink cartridge related LED behaviors

Status messages

and/or blink as pattern 6

Check cartridge lock

blinks as pattern 1

Unit status or possible causes
An ink cartridge is not installed correctly. If the packaging paper is stuck in the Ink door, remove it.
Reinstall the cartridge, then close the lid completely. · Confirm the ink cartridge is correctly installed, then press
Standby).

Refer to
“Unpack” on page 11.
“Install ink cartridges” on page 12. (Power/ “Changing the ink cartridge” on page 45.

blink as pattern 6 Remove and Re-insert black ink cartridge.
blinks as pattern 1
blink as pattern 6 Remove and Re-insert color ink cartridge.
blinks as pattern 1
and Remove and Re-insert
blink as pattern 6 both black and color ink cartridges.
blinks as pattern 1

Soiled or unsupported ink cartridge has been inserted.
Clean the surface of the nozzles and contacts on the Ink cartridges with a dampened soft cloth then let them dry before reinserting cartridge.

Replace the current Ink cartridge(s) with an authorized Ink cartridge(s).

· If this error occurs occasionally, try to replace the current Ink cartridge(s) with a new Ink cartridge(s).

“Cleaning the ink cartridge nozzles and contacts” on page 47.

“Changing the ink cartridge” on page 45.

English

Continued on next page.

LED behaviors

Status messages

blink as pattern 6 Black ink is empty. blinks as pattern 1
blink as pattern 6 Color ink is empty.
blinks as pattern 1

Unit status or possible causes
The ink is empty in the ink cartridge. Replace with a new Ink cartridge(s).
· Order a new Ink cartridge from our website at www.kodakverite.com

Refer to “Changing the ink cartridge” on page 45.

and blink as pattern 6 Both inks are empty.
blinks as pattern 1

and/or blink as pattern 6

No Ink detected

blinks as pattern 1

blink as pattern 6 Black Ink Error
blinks as pattern 1

blink as pattern 6 Color Ink Error
blinks as pattern 1
and blink as pattern 6 Both Inks Error
blinks as pattern 1

blinks as pattern 1 Defective Cartridge

lighting

Black ink is empty.

lighting Color ink is empty.

lighting

Black ink cartridge is not detected.

No ink detected.

Remove and reinstall the Ink cartridges.

“Changing the ink cartridge”

Make sure the Ink cartridges are inserted correctly.

on page 45.

Clean the surface of the nozzles and contacts on the Ink cartridges with “Cleaning the ink cartridge a dampened soft cloth then let them dry before reinserting cartridge. nozzles and contacts” on page 47.

Black ink cartridge error.
Clean the surface of the nozzles and contacts on the Ink cartridges with a dampened soft cloth then let them dry before reinserting cartridge.

“Cleaning the ink cartridge nozzles and contacts” on page 47.

Replace the current Ink cartridge with an authorized Ink cartridge. · If this error occurs occasionally, try to replace the current Ink
cartridge with a new Ink cartridge.

“Changing the ink cartridge” on page 45.

Color ink cartridge error.
Clean the surface of the nozzles and contacts on the Ink cartridges with a dampened soft cloth then let them dry before reinserting cartridge.

“Cleaning the ink cartridge nozzles and contacts” on page 47.

Replace the current Ink cartridge with an authorized Ink cartridge. · If this error occurs occasionally, try to replace the current Ink
cartridge with a new Ink cartridge.

“Changing the ink cartridge” on page 45.

Ink cartridges error.
Clean the surface of the nozzles and contacts on the Ink cartridges with a dampened soft cloth then let them dry before reinserting cartridge.

“Cleaning the ink cartridge nozzles and contacts” on page 47.

Replace the current Ink cartridges with authorized Ink cartridges. · If this error occurs occasionally, try to replace the current Ink
cartridges with new Ink cartridges.

“Changing the ink cartridge” on page 45.

Ink cartridges error.
Clean the surface of the nozzles and contacts on the Ink cartridges with a dampened soft cloth then let them dry before reinserting cartridge.

“Cleaning the ink cartridge nozzles and contacts” on page 47.

Replace the current Ink cartridges with authorized Ink cartridges. · If this error occurs occasionally, try to replace the current Ink
cartridges with new Ink cartridges.

“Changing the ink cartridge” on page 45.

Black ink is empty in the ink cartridge. You get good printed results with Color mode when you make prints in this condition, and the warning indication continues until you press .
· If you want to use both Ink cartridges, please replace with a new Black Ink cartridge.

Color ink is empty in the ink cartridge. You get good printed results with Mono mode when you make prints in this condition and the warning indication continues until you press .
· If you want to use both Ink cartridges, please replace with a new Color Ink cartridge.
Black ink is not inserted. You get good printed results with Color mode when you make prints in this condition, and the warning indication continues until you press .
· If you want to use both Ink cartridges, please replace with a new Black Ink cartridge.

English

Continued on next page.

LED behaviors lighting

Status messages
Color ink cartridge is not detected.

Unit status or possible causes
Color ink is not inserted. You get good printed results with Mono mode when you make prints in this condition, and the warning indication continues until you press .
· If you want to use both Ink cartridges, please replace with a new Color Ink cartridge.

Refer to

blink as pattern 4 Black ink is empty.

Black ink is empty in the ink cartridge.

You get good printed results with Color mode in this condition.

· If you want to use both Ink cartridges, please cancel the print job

then press

and replace with a new Black Ink cartridge.

“Changing the ink cartridge” on page 45.

blink as pattern 4 Color ink is empty.

Color ink is empty in the ink cartridge.

You get good printed results with Mono mode in this condition.

· If you want to use both Ink cartridges, please cancel the print job

then press

and replace with a new Color Ink cartridge.

“Changing the ink cartridge” on page 45.

blink as pattern 4

Black ink cartridge is not detected.

Black ink is not inserted.

You get good printed results with Color mode in this condition.

· If you want to use both Ink cartridges, please cancel the print job

then press

and replace with a new Black Ink cartridge.

blink as pattern 4

Color ink cartridge is not detected.

Color ink is not inserted.

You get good printed results with Mono mode in this condition.

· If you want to use both Ink cartridges, please cancel the print job

then press

and replace with a new Color Ink cartridge.

blink as pattern 4 Black ink level is Low.

Black ink level is low. You should prepare the new Ink cartridge.
· Order a new Ink cartridge from our website at www.kodakverite.com

blink as pattern 4 Color Ink level is Low.

Color ink level is low. You should prepare the new Ink cartridge.
· Order a new Ink cartridge from our website at www.kodakverite.com

Both inks are low in the ink cartridges.

and as pattern 4

blink Both ink levels are low.

You should prepare the new Ink cartridges. · Order new Ink cartridges from our website at
www.kodakverite.com

and blink as pattern 1

Pull out the AC plug.

Cartridge/Paper Jam:
Unplug and replug the power cable.

Check that the Ink Cartridges have no obstacles and clear pathways. “Clearing paper jam in

Connect the AC plug to the AC outlet.

the unit”

· If this error occurs occasionally, refer the latest troubleshooting to on page 46.

visit our website at www.kodakverite.com/support If you cannot solve the problem,

disconnect

the

plug

and

contact

“Power cycling” on page 47.

an Authorized Service Center.

Please proceed with cartridge setup.

· Cartridge setup is not done yet. You need to set up for ink cartridges “Cartridge Setup”

before use.

on page 39.

English

Continued on next page.

Paper related (paper jam/no paper detected)

LED behaviors
and blink as pattern 1

Status messages

Unit status or possible causes

Refer to

Pull out the AC plug.

Cartridge/Paper Jam:
Unplug and replug the power cable.

Check that the Ink Cartridges have no obstacles and clear pathways. “Clearing paper jam in

Connect the AC plug to the AC outlet.

the unit”

· If this error occurs occasionally, refer the latest troubleshooting to on page 46.

visit our website at www.kodakverite.com/support If you cannot solve the problem,

disconnect

the

plug

and

contact

“Power cycling” on page 47.

an Authorized Service Center.

and blinks as pattern 1

Insert Paper

Insert Paper. Check the paper support.
· Set specified paper in the paper support, and then press

“Insert paper into the paper

support”

on page 24.

and blinks as pattern 1

Paper Jam

A paper jam has occurred inside of the unit.

Firmly grasp the paper, and then gently pull it out.

Press

, to restart the rest of the print job.

· If you want to cancel the print job, then press

“Clearing paper jam in the unit” on page 46.

and blink as pattern 1

A paper jam has occurred inside of the unit.

Paper Jam:
Unplug and replug the power cable.

Firmly grasp the paper, and then gently pull it out. Pull out the AC plug. Wait at least 30 seconds, then connect the AC plug back into the AC

“Clearing paper jam in

socket.

the unit”

· If this error occurs occasionally, refer the latest troubleshooting to on page 46.

visit our website at

“Power cycling”

www.kodakverite.com/support

on page 47.

· If you cannot solve the problem, disconnect the AC plug and contact

an Authorized Service Center.

Communication failed on the unit.
Check the AC plug is connected to the AC outlet properly, the unit is turned On, or the connection environment (USB, Wireless) to the unit. Then follow the procedures by showing the help text on your connected
Communication failure unit. · If this error occurs occasionally, refer the latest troubleshooting to visit our website at www.kodakverite.com/support · If you cannot solve the problem, disconnect the AC plug and contact an Authorized Service Center.

General

LED behaviors

Status messages

Unit status or possible causes

Refer to

blinks as pattern 1

Printer’s ink door is open.

Ink Door Open. Close Ink Door.

blinks as pattern 1 Printer Memory Full

blinks as pattern 1

Printer Memory Full (Recoverable)

Memory of the unit is full. You cannot print with this print setting.
Please change the print setting, and try again. (Resolution, size or number of copies)
Memory of the unit is full. You cannot print the multiple copies with this print setting.

“Confirming Printing Preferences for Windows® -Page Layouts” on page 27 or “Confirming Print Settings for Mac -Layout” on page 29.

Please change the print setting, and try again.(Resolution, Size or Number “Confirming Printing

of copies)

Preferences for Windows®

-Print Quality” on page

or “Confirming Print

Settings for Mac -Quality &

Media”

on page 29.

Pull out the AC plug.

Wait at least 30 seconds, then connect the AC plug back into the socket.

and

Scanner Error:
Unplug and replug the power cable.

· If this error occurs occasionally, refer the latest troubleshooting to

visit our website at www.kodakverite.com/support If you cannot solve the problem,

disconnect

the

plug

and

contact

“Power cycling” on page 47.

an Authorized Service Center.

blink as pattern 1

English

Continued on next page.

LED behaviors and

Status messages

Unit status or possible causes

Refer to

Pull out the AC plug.

Wait at least 30 seconds, then connect the AC plug back into the socket.

Memory Error:
Unplug and replug the power cable.

· If this error occurs occasionally, refer the latest troubleshooting to

visit our website at www.kodakverite.com/support If you cannot solve the problem,

disconnect

the

plug

and

contact

“Power cycling” on page 47.

an Authorized Service Center.

blink as pattern 1

Alignment in progress. blinks as pattern 5 Alignment in progress Print jobs cannot start while running alignment.
Run the alignment or run cancel operation on the device.

Pull out the AC plug.

Wait at least 30 seconds, then connect the AC plug back into the socket.

and

Wi-Fi Module Error:
Unplug and replug the power cable.

· If this error occurs occasionally, refer the latest troubleshooting to

visit our website at www.kodakverite.com/support If you cannot solve the problem,

disconnect

the

plug

and

contact

“Power cycling” on page 47.

an Authorized Service Center.

blink as pattern 1

English

Continued on next page.

Improving the print quality
If printout is like below, please try the suggestions in order. Examples of poor image quality
Faint

Suggestions
1 Using genuine ink cartridges
» Refer to “Ordering ink cartridges” on page 46.
2 Checking ink levels
» Refer to “Checking ink levels” on page 45.
3 Cleaning the ink cartridge nozzles
» Refer to “Clean Printhead” on page 38.
4 Aligning ink cartridges
» Refer to “Cartridge Setup” on page 39.
5 Cleaning the ink cartridge nozzles and contacts
» Refer to “Cleaning the ink cartridge nozzles and contacts” on page 47.
6 Cleaning the scanner glass (Copy function)
» Refer to “Cleaning the scanner glass” on page 48.
7 Cleaning the exterior of the unit
» Refer to “Cleaning the exterior of the unit” on page 48.
8 Please change to the higher quality mode. (Faint or White lines)
» Refer to “Confirming Printing Preferences for Windows® -Print Quality” on page 26 or “Confirming Print Settings for Mac -Quality & Media” on page 29.

Faded colors / Incorrect color

White lines across on the page No printing results on the page

English

Appendix

Specifications
For more product specifications, see the Product Data Sheet at www.kodakverite.com/support

Dimensions (width x depth x height) Maximum dimensions (width x depth x height) Weight
Power requirements
Operating temperature
Operating humidity

Technical Data 17.7 x 10.7 x 6.0 inches (450.4 x 272.5 x 153 mm) 17.7 x 18.5 x 10.3 inches (450.4 x 470.6 x 262 mm) 8.0 lb. (3.65 kg)
100 – 127 VAC (-10%/+5%), 50/60 Hz (+/- 3 Hz)
41 °F (5 °C) to 95 °F (35 °C)
10 60 % (no condensation)

Print technology Standard printer language(s) Print resolution (best)
Copy resolution (Black & Color/Text and Photo)
Scanner type Scan resolution (optical) (Software enhanced) Maximum scan area Supported file types

Printer Thermal inkjet
GDI
Up to 4800 x 1200(black) Up to 4800 x 1200(color)
Copier Scan up to 600 x 600 dpi Print up to 4800 x 1200 dpi(black) Print up to 4800 x 1200 dpi(color)
Scanner Flatbed scanner
Up to 1200 x 1200 dpi Up to 19,200 x 19,200 dpi 8.5 x 11.7 inches (216 x 297 mm)
JPEG, PDF

Input capacity Output capacity Size
Weight

Paper
Plain paper (20 lb. or 75 g/m2): Up to 60
Plain paper (20 lb. or 75 g/m2): Up to 25
Letter, Legal, JIS B5, A4, Executive, A5, Statement, A6, 3×5 in., 4×6 in., 5×7 in., Hagaki, 3.5×5 in.(L), 10 Envelope, DL Envelope, C5 Envelope Plain paper: 17 -24 lb. (64 – 90 g/m2)

Connection type
Supported operating systems Direct print support capability

PC-Network Connection USB 2.0 (High Speed) Wi-Fi IEEE 802.11 b/g/n Visit our website at www.kodakverite.com/support Wireless Direct Printing

Standards

Acoustic values based on ISO9296

Visit our website at www.kodakverite.com/support

· Technical specifications subject to change without notice.

· Notes on statutory limitations, data protection and legal validity

Note about recycling
· This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations.
· For product recycling information, please visit www.kodakverite.com/support click on
Safety Data Sheet (SDS)

The reproduction of certain documents (e.g. by scanning, printing, copying) is prohibited in many countries. The list of such documents below is not intended to be complete, it only offers a general overview. In case of doubt, consult your legal adviser.
Passports (personal identification) Entrance and exit visa papers (immigration papers) Military service documents Paper Currency, Bank notes, travel checks, payment orders Postage stamps, tax stamps (stamped or unstamped) Loan papers, certificates of deposit, bonds Documents protected by copyright

To obtain Safety Data Sheets (SDS) for supplies containing chemical substances (e.g. ink), visit our website at www.kodakverite.com/support
JF230UA/JF233UA/JF240UA Neither Funai nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or failure to strictly comply with Funai operating and maintenance instructions. Funai shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original products or approved products. Funai shall not be held liable for any damage resulting from electromagnetic interference that occurs from the use of any interface cables other than those designated as products.

English

Limited Warranty

Wireless All-In-One Inkjet Printer
FUNAI warrants this Product to be free from malfunctions and defects in both materials and workmanship for one year from the date of purchase.
LIMITS AND EXCLUSIONS: Warranty service is only available from within the country where the Product was originally purchased. You may be required to ship Product, at your expense, to the authorized service facility for the country where the Product was purchased. Funai will repair or replace this Product if it fails to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Funai is unable to repair or replace a Product, Funai will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Funai along with proof of the purchase price paid. Repair, replacement, or refund of the purchase price are the sole remedies under this warranty. If replacement parts are used in making repairs, those parts may be remanufactured or may contain remanufactured materials. If it is necessary to replace the entire Product, it may be replaced with a remanufactured Product. Remanufactured Products, parts and materials are warranted for the remaining warranty term of the original Product, or 90 days after the date of the repair or replacement, whichever is longer. THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover dama

KODAK VERITE 55W ECO Wireless All In One Inkjet Printer User Guide

VERITE 55W ECO Wireless All In One Inkjet Printer

Product Information

Specifications

Product Usage Instructions

Introduction

Notice and Safety

About this Extended User Guide

General Safety Information

Overview

Control Panel

Meaning of LED Behavior and Lights

Initial Operation

Initial Setup

Print Using Your Smartphone/Tablet

Check Print Status from Your PC

Print Media

Web Interface

Service

Appendix

FAQ

Q: How do I connect the printer to my mobile device?

Q: What types of print media are compatible with this

Q: How can I improve the print quality?

Q: Where can I find information about recycling the

Q: What should I do if I encounter an issue that is not covered

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Kodak User Manuals

Related Manuals