Dong Guan WS2812B Led Strip Lights User Manual
- June 17, 2024
- Dong Guan
Table of Contents
Dong Guan WS2812B Led Strip Lights
Product Information
The product is a wireless transmitter that operates under Part 15 of the FCC Rules. It is designed to transmit signals using antennas and must be installed with a separation distance of at least 20 cm from all persons. The transmitter should not be co-located with any other antenna or transmitter. The device is compliant with FCC regulations and is subject to certain conditions to ensure proper operation.
Specifications
- Compliance: Part 15 of the FCC Rules
- Separation Distance: At least 20 cm from all persons
Product Usage Instructions
Installation
- Choose an appropriate location to install the wireless transmitter.
- Ensure that the receiving antenna is properly oriented or relocated for optimal signal reception.
- Increase the separation distance between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from the one to which the receiver is connected.
- If you need further assistance with installation, consult the dealer or an experienced radio/TV technician.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Additionally, they must not be co-located for operating in conjunction with any other antenna or transmitter. This is to ensure compliance with FCC regulations and prevent potential harmful interference.
Operation
The device operates under Part 15 of the FCC Rules and is subject to two conditions:
- The device may not cause harmful interference.
- The device must accept any interference received, including interference that may cause undesired operation.
Thank you for buying this product. To provide an excellent user experience,please install it according to these instructions and then give the instructions to appropriate person for rerention and future reference
How to turn on the sensor mode?
Press the light strip flashes white light 3 times then the PIR infrared sensor
mode turn on
How to turn on the sensor mode?
Press (the light strip flashes white light once then the PIR infrared sensor
mode turn off
LotusLamp X APP Manual
Software Overview
-
Overview
LotusLamp X is a mobile APP to control LED strips on both Apple and Android phones.
The traditional control ways like infrared, 433MHz, 2.4GHz, and others old wired ways will be replaced by mobile phone control way with convenient, powerful and scalable features.
Through this mobile APP, you can not only control the color, brightness and color temperature of the LED strips but also set up all kinds of fancy flash mode; Also this APP can change the light of the LED strip according to the rhythm of the music. This APP can set and control several LED strips through Bluetooth and the operation is very simple, easy to learn and easy to use. -
Features
-
Adjust color LED strips with 60,000 colors to change color and brightness and adjust monochrome LED stips to change brightness and color temperature
-
Play music or turn on a sound playback device, you can let the light change the color and brightness with the rhythm of music, the music rhythm beautiful
-
Inside multiple setting mode for color change and control LED strips without mobile
-
Long-distance control with omnidirectional antenna, and many-to-many group control mode
-
Performance
LotusLamp X APP is easy for use as well as great compatible for all kinds of smart phones; After the actual test of hundreds of mobile phones verification, the compatibility is above 95% of mobile phones in the market. APP is small and convenient, it consumes less system resources, so the requirements of the mobile configuration are low. The control delay is small, the operation feel good, light control is smooth with people’s visual sense.
Operating Environment
This APP program requires phones of system above Andriod 5.0 and ios 11.0.Mobile phone configuration is not limited.
Instructions
Note: Android version and iOS version download and use the same method, here in the Android version as an example.
-
APP Download
-
Scan the QR code
iOS and Android systems can download the ” Lotuslamp X” APP by scanning the QR code. Open the browser or other tools with “Scan QR code” function, scan the ” LotusLamp X ” QR code as below: After the software is successfully downloaded, click APK to install. After the installation, the following program icons will appear on the desktop: -
Арр Operation
(1) Click on the LotusLantern APP icon, and enter the APP page: After entering the APP, the device list page is displayed:
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co –
located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
FAQ
Q: What is the FCC compliance for this product?
A: This product complies with Part 15 of the FCC Rules.
Q: What is the separation distance required for the antennas?
A: The antennas used with this transmitter must be installed with a separation distance of at least 20 cm from all persons.
Q: Can the transmitter be co-located with other antennas or transmitters?
A: No, the transmitter should not be co-located with any other antenna or transmitter.
Q: What should I do if I experience interference or undesired operation?
A: Ensure that the device is properly installed and that the separation distance between the equipment and receiver is increased. Consult the dealer or an experienced radio/TV technician for further assistance.