HIMOX-H06 Air Purifier User Manual

HIMOX-H06 Air Purifier

Points for Attention

WARNING

1. To avoid electric shock and fire, do not allow water, liquid or any flammable detergent to get into or to clean the product.
2. Do not spray insecticide, perfume, or another flammable spray around the products.
3. Before connecting the power supply, please check whether the voltage of the product is consistent with the local power supply voltage.
4. This product can not replace normal ventilation, daily dust collection or oil pumping when cooking.
5. Ensure the product is used in condition of a stable and horizontal level.
6. Leave at least 30cm of space on the back and sides of the product, and at least 50cm of space above the product when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert finger or other things into the air outleUinlet to prevent physical damage or trouble.

Product Overview

Components

1. Power Button
2. Timer Button
3. Light Control Button
4. Wind Speed Button

Specifications

Adapter

| Input: 100-240V 50/60Hz

Output: 24V-1.2A

Power| 23W

Filter Installation

NOTICE

1. Please remove the packaging of the filter before using for the first time.
2. Ensure the machine is unplugged before removing or installing the filter.
3. When the power indicator keeps flashing in red, the filter should be replaced.
4. Please wipe the dust on the filter regularly, do not wash or use it for longer than the period suggested.
5. Please use the filter specially designed for this product.

Steps of Installing Filter

Unplug the power socket of the machine before replacing or installing the the filter.

1. invert the machine, and rotate the base along the direction marked “OPEN”.
2. Take out the filter from the machine.
3. Remove the packaging of the filter.
4. lnstall the filter into the machine.
5. Then Install the base, rotate and tighten the base along the direction marked “CLOSE”.

NOTICE

1. Please press the power button for 5s to reset after installing a new filter, and the red light will stop flashing.
2. When using the device for the first time, please remove the packing filter before using but please not to reset the device.

Function Instruction

Insert the plug into the power socket, the buzzer will ring for 1 second, which indicates the device connected with power.

Button Operation

1. Power Button
   Touch the power button and the indicator will display the color according to the air quality. The machine is in low mode by default, and the corresponding indicator light is on.
   Notice: By turning off and on the device, it will default to its previous working state before shutdown.

2. Timer/WiFi Button
   In the condition of working, every time you press the the Timer/WiFi button, the timer among the circulation of 4H and 8H, the corresponding indicator will be on, In the status of timing, the machine begins to count down. When the time is up the machine will stop working and the machine will be in standby mode.
   Notice : Long press the Timer/WiFi button for 5 seconds to start the WiFi function .

3. Wind Speed Button
   In the condition of working, press the wind speed button to adjust the wind speed among the circulation of L-H-Auto grade, and the corresponding indicators will be on .

4. Light Control Button
   In the condition of working, press the light control button, the indicator will be on. Every time you press it, and the light will be circulation among Soft -Standard -Off mode.

Works With Smart Life APP

Download & Registration 

1. Scan the QR code to download “Smart Life” APP. You can also search “Smart Life” in either APP store or Google Play to install the APP.
2. Open the “Smart Life” APP, tap “Register”to register a “Smart Life” account with your phone number or E-mail. Then sign in the APP.
3. Open the “Smart Life” APP, click “add device” or tap “+”on the top right corner of the APP homepage. There are two methods to enter the page of “add device” – Add WiFi manually or search for the devices automatically.

In the homepage of add device manually, choosing any one of product rang to enter a new homepage and ensure the indicator light flash quickly.
The devices provide two configuration methods. In the homepage of Easy mode, tap “Other methods” on the top right comer to enter Easy mode and AP mode, then could choose one of mode to connect with WiFi.

Add Devices in Easy Mode(Recommend)

Make sure your smart device is charged and your mobile phone is connected to your WiFi network. If the WiFi indicator of smart device does not flash, please press the WiFi/Timer button for more than 5 seconds until the indicator light keeps flashing quickly, it means the device is ready for paring.
Tap “+” on the top right corner of the APP, select type of service device and click it. When appearing “Add 1 device successfully”, it means the connection is completed and your device will be listed in your APP list.

Add Devices in AP Mode

1. If failed in Easy Mode, users could also add devices in AP Mode.
2. Press the WiFi button for more than 5 seconds until the WiFi indicator light begin to flash slowly, it means the device is already for configuration in the AP Mode.
3. Tap “+”on the top right corner of the APP. Select AP mode and tap it. Then tap “Ensure the indicator flash slowly”. Then tap “Connect now” to go to the WLAN Settings interface in your mobile phone and select the WiFi network named “Smart Life XXXX”to connect it.
4. Return to the “Smart Life” APP, the connection will start automatically.
5. When appears “Add 1 device successfully”, it means the connection is completed and your device will be listed in your APP list.

Now you can control your smart device via your mobile phone APP anytime and anywhere (Make sure your mobile phone and smart device are all connected to the network, and to change the router name into Smart Life XXX).

Maintenance

NOTICE

1. Ensure the machine is unplugged before maintenance.
2. Do not immerse the machine into water or any liquid.
3. Do not use abrasive, corrosive or flammable cleaners (such as bleach or alcohol) to clean any part of the unit.
4. Don’t use a vacuum cleaner to clean the filter or wash it directly.
5. Please sterilize the filter under sunlight regularly.

Cleaning & Storage

1. ensure the machine is power-off and unplugged.
2. Use a soft cloth with a neutral cleanser to clean away any dust or debris from the surface of the unit and air inleUoutlet.
3. After the machine has completely dry out, put on the bag and place it in a cool and well-ventilated place.
4. If the machine not used for a long time, in the basic of previous steps, please turn on the machine for a few minutes from time to time to ensure a good performance.

Notice: Please don’t drop any water into the machine when clean the air outlet.

FAQ

SITUATION

| ****

REASON

---|---

Not working

| Is it plugged into a power socket? Is there a power outage
Is the home leakage switch or fuse cut off
Is the filter replacing indicator keep fiashing

Poor performance

| Is there any dust in the surface of primary filter
Is there any obstacle blocking the air inleUoutlet

Significant noise

| Is there anything stuck on the fan in the air outlet
Is the machine tilted
Please set a lower grade of wind speed if the noise is too loud , or set low grade of wind speed when using in bedroom at night
Coming out bad smell| It is the normal phenomenon that the machine emits the smell of plastic for the first time
The machine will emit bad smell if the filter is dusty, so in this situation, please clean or replace the filter

If the burning smell emits from the machine, please unplug the power socket and contact with buyer or customer service

The reminder of replacing filter after user have replaced a new one

| ****

Please press the power button for 5s to reset the machine and the life counter of the filter will start

Notice: If the above FAQ can not solve your problems and need maintenance, please contact the supplier or after sales service center. Please do not disassemble the machine to maintain by yourself.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>